5
Clothing impregnation:
•Top material is equipped by a sufficient impregnation PowerShell that secures protection
against water and chemicals. The producer of the material guarantees min. 30 cycles
before any re-impregnation when the laundering instructions are followed.
•Impregnation efficiency in real conditions may differ from the measured laboratory
results and is influenced by several factors.
•Keep your garment clean.
•For recovery of the treatment we recommend additional drying in the tumbler at
temperature 70 °C for 15 minutes ! Perform the additional drying on closed garment
from the face side after each maintenance (washing + drying).
Clothing protective function and the complete list of harmonized standards used when
designing this PPE:
This clothing is used as a firefighter's body protection during fire liquidation and related tasks,
with the exception of interventions when chemicals or gases are present (it only allows for
accidental spraying with chemicals or flammable fluids).
This clothing can be also used as a part of the total grounding system preventing combustible
discharges (except for the oxygen-enriched atmosphere and protection from voltage in grids).
This protective clothing protect the upper, as well as lower body parts, including a neck, arms
up to wrists, and legs up to ankles. In combination with other protective equipment, such as a
helmet, gloves, a face-guard, and boots, it provides firefighters with complex protection from
hazards stipulated in applicable standards:
EN ISO 13688:2014 -Protective Clothing –General Requirements
(EN ISO 13688:2013)
EN 1149-5:2008 - Protective Clothing –Static Electricity Clothing
(EN 1149-5:2008)
