Di-soric ID-110 Manuale utente

ID-SYSTEM

ID-110

BLUETOOTH CONNECTION INSTRUCTIONS

800013-000000 · Rev 1 · 202008

BLUETOOTH CONNECTION INSTRUCTIONS ID-110 BLUETOOTH CONNECTION INSTRUCTIONS ID-1102

800013-000000 · Rev 1 · 202008

Inhaltverzeichnis / Contents

1 Inbetriebnahme /

Set Up........................................................................................................................................................................ 3

2 Artikelliste /

Article list.................................................................................................................................................................... 3

3 Abmessungen /

Dimensions ................................................................................................................................................................ 4

4 Pinbelegung /

Reader Pinouts........................................................................................................................................................... 4

5 Technische Daten /

Technical data (typ.).................................................................................................................................................... 4

6 Handhabung /

Handling..................................................................................................................................................................... 6

7 Optimierung von DPM Lesungen /

Optimizing DPM Reading............................................................................................................................................ 6

8 Lesemodus und Barcodetyp /

Reading Modes and Barcode Types ........................................................................................................................... 6

9 Lesebereich /

Reading Ranges......................................................................................................................................................... 7

10 Reader /

Reader Feedback....................................................................................................................................................... 7

11 Symbologien „Ein“ in Standardeinstellung /

Symbologies Defaulted On ......................................................................................................................................... 8

12 Symbologien „Aus“ in Standardeinstellung /

Symbologies Defaulted O ......................................................................................................................................... 8

13 Reader-ID und Firmwareversion /

Reader ID and Firmware Version................................................................................................................................ 8

14 Reinigung und Pﬂege /

Maintenance............................................................................................................................................................... 9

15 Technische Unterstützung und Reklamation /

Technical Support and Returns................................................................................................................................... 9

16 Hinweise zu Open Source Software /

Notes on open source software................................................................................................................................ 10

BLUETOOTH CONNECTION INSTRUCTIONS ID-1102 3

800013-000000 · Rev 1 · 202008

1 Initial Pairing Instructions for Bluetooth® Connection to Smartphones and Tablets

The ID-110-IM3-2-BT barcode readers are compatible with most

Bluetooth keyboard supported smartphone and tablet devices.

1. In your device’s list of applications, select the ‘Settings’ icon.

2. Select the ‘Bluetooth’ setting.

3. Scan the following barcode to enable your reader to be discoverable by

the smartphone or tablet:

4. The Code CR 2600 reader will appear on the list of Bluetooth devices in

the smartphone or tablet, select the reader to initiate connection.

Some smartphones or tablets will require the user to manually refresh

the list of devices before the Code CR 2600 will appear for connection.

5. A window with a PIN will appear on the device.

6. When the reader beeps 2 times, it is ready for PIN entry. Using the PIN

Number Reference Barcodes (located on page 6), scan each of the PIN

digits with your reader. You will have 30 sec. to enter the PIN. Scan the

‘Submit PIN’ barcode when the PIN sequence has been entered.

7. The device will show a positive connection indicator when connection is

successful.

The reader will beep once when connected and the wireless icon LED

will remain solid.

Bluetooth

Discoverable

Mode

Note:

Once the reader is in discoverable mode, it will beep 2 times. You will have

30 sec. to initiate connection to the host device. If the 30 sec. elapses

without connecting to host device, scan the Discoverable Mode barcode

again.

2 Keyboard Display Options for Apple® iOS*

The bottom trigger button on the

CR 2600 can be conﬁgured to toggle

the smartphone or tablet’s onscreen

keyboard.

To activate this feature, scan the following barcode:

Keyboard Display

Option On

To reset the trigger back to the default settings, scan the

following barcode:

Keyboard Display

Option O

*This Keyboard Display option is only compatible with Apple iOS.

3 Reconnect to Other Bluetooth® Devices

1. To re-establish connection to another host device already paired with

the reader, scan the following barcode:

2. The Code CR 2600 will appear in the list of devices in the Bluetooth

menu on your device. Select the reader to initiate connection.

Note:

If the Code ID-110-IM3-2-BT battery has been removed, the reader is out of

range, or is powered o while in default connection settings, the reader will

initiate connection to the most recent host device when powered back on.

Switch

Host

Device

4 Clear Connection History

To clear reader connection from all Bluetooth devices,

scan the following barcode:

Note:

To re-establish connection once connection history has been

cleared, repeat steps 1-8 of Initial Pairing Instructions.

Clear

Bluetooth

Connection

BLUETOOTH CONNECTION INSTRUCTIONS ID-110 BLUETOOTH CONNECTION INSTRUCTIONS ID-1104

800013-000000 · Rev 1 · 202008

5 Initial Pairing Instructions for Bluetooth® Connection to Windows® 7

A Bluetooth dongle may be needed if it is not built into the host device.

1. Find and select the Bluetooth icon in lower right notiﬁcation tray.

2. Right-click on the Bluetooth icon.

Select ‘Add a Device’ from the list of options.

3. Scan the following barcode to enable your reader to be

discoverable by Windows 7:

Bluetooth

Discoverable

Mode

Note:

Once the reader is in discoverable mode, it will beep 2 times.

You will have 30 sec. to initiate connection to host device. If 30 sec. elap-

ses without connecting to host device, repeat steps 1-3.

4. The Code reader will appear as a device option in the ‘Add a Device’

window. Select the Code CR 2600 device.

Code ID-110

Note:

The Code CR 2600 will be the only reader listed for selection once the

Discoverable Mode barcode is scanned.

5. Once the CR 2600 device has been selected, a screen will appear

containing a PIN.

Code ID-110

6. When the reader beeps 2 times, it is ready for PIN entry.

Using the PIN Number Reference Barcodes (located on page 6), scan

each of the PIN digits with your reader.

You will have 30 sec. to enter the PIN. Scan the ‘Submit PIN’ barcode

when the PIN sequence has been entered

Note: Failure to complete PIN entry within 30 sec. will result in a ‘Try

Again’ notiﬁcation button.

Press the button and repeat steps 3-6.

7. Once the installation of the reader driver is completed, a ‘this device

has been successfully added to this computer’ window will appear.

Code ID-110

8. Reader will beep once and the

wireless icon LED will remain solid

when successfully connected.

9. To test connection, open ‘notepad’ and scan barcodes.

If data appears on notepad after each scan, you have successful

connected to Windows 7.

If notepad is not showing scanned data, remove the BT device from the

Bluetooth device screen and repeat steps 1-7.

BLUETOOTH CONNECTION INSTRUCTIONS ID-1104 5

800013-000000 · Rev 1 · 202008

6 Initial Pairing Instructions for Bluetooth® Connection to Windows 8

A Bluetooth dongle may be needed if it is not built into the host device.

1. From the Start screen, select ‘Settings’ then select ‘Change PC settings.’

Note:

To bring up the settings menu, press the Windows and C keys

simultaneously on the keyboard. If using a mouse, hover the mouse in the

top-right corner. Tablet or PC users with a touch screen, swipe your ﬁnger

inward from the top right corner.

2. Scan the following barcode to enable your reader to be discoverable by

Windows 8:

Bluetooth

Discoverable

Mode

Note:

Once the reader is in discoverable mode, it will beep 2 times.

You will have 30 sec. to initiate connection to host device. If 30 sec.

elapses without connecting to host device, scan the discoverable mode

barcode again.

3. Select ‘Devices’ and then select ‘Add a Device.’

4. Your Code reader will appear as a device option on the ‘Devices’

window. Select the Code CR 2600 device.

Code ID-110

Note:

The Code CR 2600 will be the only reader listed for selection once the

Discoverable Mode barcode is scanned.

5. Once the Code CR 2600 device has been selected, a screen will appear

containing a PIN (Passcode).

Windows 8 will occasionally provide an entry box for users to create

their own passcode; enter the numeric passcode of your choice.

6. When the reader beeps 2 times, it is ready for passcode entry.

Using the PIN Reference Barcodes (located on page 6), scan each of the

passcode digits with your reader. You will have 30 sec. to enter

the passcode. Scan ‘Submit PIN’ when the passcode sequence has been

entered.

7. The Code CR 2600 will appear as a device if the passcode has been

entered correctly.

Code ID-110

8. Reader will beep once and the wireless

icon LED will remain solid when successfully

connected.

9. To test connection, open ‘notepad’ and scan barcodes.

If data appears on notepad after each scan, you have successful

connected to Windows 8. If notepad is not showing scanned data,

remove the BT device from the Bluetooth device screen and repeat

steps 1-9.

BLUETOOTH CONNECTION INSTRUCTIONS ID-110 BLUETOOTH CONNECTION INSTRUCTIONS ID-1106

800013-000000 · Rev 1 · 202008

7 Initial Pairing Instructions for Bluetooth® Connection to Windows 10

1. From the Start screen, select ‘Settings’.

Note: To bring up the settings menu, press the Windows and C keys

simultaneously on the keyboard. If using a mouse, hover the mouse

in the top-right corner. Tablet or PC users with a touch screen, swipe

your ﬁnger inward from the top right corner.

2. In the Settings dialog, choose ‘Devices’, then ‘Bluetooth’.

3. Scan the following barcode to enable your reader to be

discoverable by Windows 10:

Bluetooth

Discoverable

Mode

Note: Once the reader is in discoverable mode, it will beep 2 times. You

will have 30 sec. to initiate connection to host device. If 30 sec.

elapses without connecting to host device, scan the discoverable mode

barcode again.

4. When the Code device is ready to pair, it will appear in the Manage

Bluetooth devices list. (In this example we are using

a Code CR 2600 Palm device.)

Code ID-110 Palm

5. Click on the device in the list, then Pair.

Code ID-110 Palm

Ready to pair

6. Once the Code CR 2600 device has been selected, a screen will appear

containing a PIN (Passcode). Windows 10 will occasionally provide an

entry box for users to create their own passcode; enter the numeric

passcode of your choice.

Code ID-110 Palm,

7. When the reader beeps 2 times, it is ready for passcode entry.

Using the PIN Reference Barcodes (located on page 6), scan each of the

passcode digits with your reader. You will have 30 sec. to enter the

passcode. Scan ‘Submit PIN’ when the passcode sequence has been

entered.

8. The device will appear in the Manage Bluetooth devices as a

Connected device.

Code ID-110 Palm

9. Reader will beep once and the

wireless icon LED will remain

solid

when successfully connected.

10. To test connection, open ‘notepad’ and scan barcodes.

If data appears on notepad after each scan, you have successful

connected to Windows 10.

If notepad is not showing scanned data, remove the BT device from

the Bluetooth device screen and repeat steps 1-10.

BLUETOOTH CONNECTION INSTRUCTIONS ID-1106 7

800013-000000 · Rev 1 · 202008

8 PIN Reference Barcodes

123

456

789

0 Submit PIN

BLUETOOTH CONNECTION INSTRUCTIONS ID-110 BLUETOOTH CONNECTION INSTRUCTIONS ID-1108

800013-000000 · Rev 1 · 202008

OPEN SOURCE LIZENZEN

Dieses di-soric Solutions Produkt enthält Open Source Software von verschiedenen Entwicklern, die unterschiedlichen Lizenzen unterliegen, z.B. der General

Public License in allen Versionen.

Für di-soric Solutions Produkte, die der General Public License in ihrer jeweiligen Fassung unterliegen, gilt Folgendes:

Es ist freie Software: Sie können sie gemäß den Bedingungen der GNU General Public License verwenden, die von der Free Software Foundation veröent-

licht wird.

Der folgende Haftungsausschluss gilt für Softwarekomponenten, die der General Public License oder der Lesser General Public License in ihren jeweiligen

Versionen unterliegen:

HAFTUNGSAUSSCHLUSS

Open Source Software wird in der Honung verbreitet, dass sie nützlich ist, jedoch ohne jegliche Gewährleistung, auch ohne die implizite Garantie der Han-

delsfähigkeit oder Eignung für einen bestimmten Zweck.

Weitere Einzelheiten ﬁnden Sie in den entsprechenden Lizenzen.

Die Verantwortung von di-soric Solutions für di-soric Solutions Produkte bei produktspeziﬁscher Software bleibt von dem vorstehenden Haftungsausschluss

unberührt.

URHEBERRECHTSHINWEIS

Bitte beachten Sie, dass wir Open Source Software zusammen mit diesem Produkt und/oder dieser Produktﬁrmware verwenden (im Folgenden nur „Pro-

dukt“).

Die Open Source Software-Lizenzen werden von den jeweiligen Rechteinhabern vergeben. Die Open Source Lizenzen haben Vorrang vor allen anderen

Lizenzinformationen in Bezug auf die jeweilige Open Source-Software, die im Produkt enthalten ist, einschließlich, aber nicht beschränkt auf den Endbenutzer-

Softwarelizenzvertrag.

Die neuesten Informationen zur Lizenzvereinbarung für Ihr Produkt sind auf der Website des jeweiligen Produkts bzw. im Download-Bereich in der jeweiligen

zip-Datei integriert (www.di-soric-solutions.com).

OPEN SOURCE LICENSES

This di-soric Solutions product contain Open Source Software from various developers which is subject to dierent licenses e.g. the General Public License in

all versions. For di-soric Solutions products which are subject to the General Public License in their respective versions the following applies:

It is free software: you can use it under the terms of the GNU General Public License as published by the Free Software Foundation.

The following disclaimer applies to the software components that are subject to the General Public License or the Lesser General Public License in their

respective versions:

WARRANTY DISCLAIMER

Open Source Software is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of merchantability or ﬁtness

for a particular purpose. See the applicable licenses for more details.

The responsibility of di-soric Solutions for di-soric Solutions products, in the case of product-speciﬁc software, remains unaected by the above disclaimer.

Please note we use Open Source Software along with this product and/or this product ﬁrmware (in the following just “product”).

The Open Source Software licenses are granted by the respective right holders. And the Open Source licenses prevail all other license information with regard

to the respective Open Source Software contained in the product, including but not limited to End User Software Licensing Agreement.

The latest information on the license agreement for your product are integrated in the website of the respective product or in the zip-ﬁle at the download area

(www.di-soric-solutions.com).

For source code which is licensed under any version of the GNU General Public License (GPL) or the GNU LGPL you may obtain the complete corresponding

source code of the GPL software from us by sending a written request to:

opensource@di-soric.com. Please write the following information in your request (i) the name of the covered binary, (ii) the di-soric Solutions product code and

the version number, (iii) your complete contact information.