Dibo CT 160 Guida all'installazione

ENGLISH

(Translation of original instructions)

ENGLISH

1. INDEX

INDEX................................................................................................................................... 2

GENERAL INFORMATION.................................................................................................. 4

2.1.

COPE OF THE MANUAL

...................................................................................................................4

2.2.

DENTIFYING THE MACHINE

.............................................................................................................5

2.3.

OCUMENTATION PROVIDED WITH THE MACHINE

...........................................................................5

TECHNICAL INFORMATION............................................................................................... 5

3.1.

ENERAL DESCRIPTION

...................................................................................................................5

3.2.

EGEND

..........................................................................................................................................5

3.3.

ANGER ZONES

...............................................................................................................................5

3.4.

CCESSORIES

..................................................................................................................................6

SAFETY INFORMATION ..................................................................................................... 6

4.1.

AFETY REGULATIONS

....................................................................................................................6

HANDLING AND INSTALLATION....................................................................................... 9

5.1.

IFTING AND TRANSPORTING THE PACKAGED MACHINE

..................................................................9

5.2.

HECKS ON DELIVERY

.....................................................................................................................9

5.3.

NPACKING

....................................................................................................................................9

5.4.

ATTERIES

......................................................................................................................................9

5.4.1.

Batteries: preparation.............................................................................................................10

5.4.2.

Batteries: installation and connection.....................................................................................10

5.4.3.

Batteries: removal...................................................................................................................11

5.5.

HE BATTERY CHARGER

...............................................................................................................12

5.5.1.

Choosing the battery charger..................................................................................................12

5.5.2.

Preparing the battery charger.................................................................................................12

5.6.

IFTING AND TRANSPORTING THE MACHINE

..................................................................................12

PRACTICAL GUIDE FOR THE OPERATOR..................................................................... 12

6.1.

ONTROLS

ESCRIPTION

............................................................................................................12

6.2.

OUNTING AND ADJUSTING THE SQUEEGEE

..................................................................................14

6.3.

OVING THE MACHINE WHEN NOT IN OPERATION

.........................................................................14

6.4.

OUNTING AND CHANGING THE BRUSH

DRIVE DISKS

....................................................................14

6.5.

ETERGENTS

NSTRUCTIONS

.......................................................................................................15

6.6.

REPARING THE MACHINE FOR WORK

............................................................................................15

6.7.

ORKING

......................................................................................................................................16

6.8.

OME USEFUL TIPS TO GET THE MOST FROM YOUR SCRUBBER DRIER

............................................17

6.8.1.

Prewashing with brushes or pads.............................................................................................17

6.8.2.

Drying......................................................................................................................................17

6.9.

RAINING THE DIRTY WATER

........................................................................................................17

6.10.

RAINING THE CLEAN WATER

.......................................................................................................18

PERIODS OF INACTIVITY................................................................................................. 18

BATTERY MAINTENANCE AND CHARGING.................................................................. 18

8.1.

HARGING PROCEDURE

.................................................................................................................19

MAINTENANCE INSTRUCTIONS ..................................................................................... 19

9.1.

AINTENANCE

ENERAL RULES

.................................................................................................19

9.2.

OUTINE MAINTENANCE

...............................................................................................................20

9.2.1

CT 160 basket filter: cleaning .................................................................................................20

9.2.2

CT 230 basket filter and float switch.......................................................................................20

9.2.3

CT 160 suction motor air filter: cleaning.................................................................................20

9.2.4

CT 230 Suction motor air filter: cleaning................................................................................20

9.2.5

Detergent filter: cleaning.........................................................................................................20

9.2.6

Squeegee blades: replacing......................................................................................................20

9.2.7

Fuses: replacement ..................................................................................................................21

ENGLISH

9.3.

OUTINE MAINTENANCE

...............................................................................................................22

9.3.1.

Daily operations......................................................................................................................22

9.3.2.

Weekly operations ...................................................................................................................22

9.3.3.

Six monthly operations............................................................................................................22

10.

CONFIGURING THE SCRUBBER DRIER.................................................................... 23

11.

TROUBLESHOOTING................................................................................................... 24

ENGLISH

2. GENERAL INFORMATION

Read this manual carefully before carrying out any work on the machine

2.1. Scope of the manual

This manual has been written by the Manufacturer and is an integral part of the machine.

It defines the purpose for which the machine has been designed and constructed and

contains all the information required by operators

In addition to this manual containing all user information, other publications are available

providing specific information for maintenance personnel

Constant respect for the instructions guarantees the safety of the operator and the

machine, low running costs and high quality results and extends the working life of the

machine. Failure to respect the instructions may lead to damage to the operator,

machine, floor being washed and environment.

To find the topic that interests you more rapidly, consult the list of contents at the

beginning of the manual.

Parts of the text requiring special attention are highlighted in bold and preceded by the

symbols illustrated and described here.

!DANGER

Indicates the need for attention in order to avoid a series of consequences which

could cause death or damage to the health of the operator.

IMPORTANT

Indicates the need for attention in order to avoid a series of consequences which

could cause damage to the machine or work environment or financial loss.

i INFORMATION

Particularly important instructions.

In line with the company's policy of constant product development and updating, the

Manufacturer reserves the right to make modifications without warning.

Although your machine may differ appreciably from the illustrations in this document,

safety and the information contained in this manual are guaranteed.

The definition "machine" replaces the trade name covered by this manual..

Persons responsible for using the machine without performing any operations requiring precise technical skills.

Persons with experience, technical training and a knowledge of legislation and standards, able to perform all the

necessary operations and to recognise and avoid possible risks in handling, installation, use and maintenance of this

machine.

ENGLISH

2.2. Identifying the machine

The rating plate provides the following information:

•model;

•power supply;

•total nominal power;

•serial number;

•year of fabrication;

•dry weight;

•maximum slope;

•barcode with serial number;

•manufacturer's identification.

2.3. Documentation provided with the machine

•User manual;

•guarantee certificate;

•EC certificate of conformity.

3. TECHNICAL INFORMATION

3.1. General description

This machine is a scrubber drier for sweeping, washing and drying flat, horizontal, smooth

or moderately rough, even and obstacle free floors in civil and industrial premises.

The scrubber drier spreads a solution of water and detergent in the correct concentration

on the floor and then scrubs it to remove the dirt. By carefully choosing the detergent and

brushes (or abrasive disks) from the wide range of accessories available, the machine

can be adapted to a wide range of combinations of types of floor and dirt.

A suction system incorporated in the machine dries the floor after washing by means of

the low pressure generated in the dirty water tank by the suction motor. The squeegee

connected to the tank collects the dirty water.

3.2. Legend

The main parts of the machine are as follows:

•detergent tank (fig. A, ref. 1): contains and transports the mixture of clean water and

detergent;

•dirty water tank (fig. A, ref. 2): collects the dirty water picked up from the floor after

washing;

•control panel (fig. A, ref. 3);

•head assembly (fig. A, ref. 4): the main element is the brushes which distribute the

detergent solution on the floor and remove the dirt;

•squeegee assembly (fig. A, ref. 5): wipes and dries the floor by collecting the water;

3.3. Danger zones

A - Tank assembly: when using certain detergents, danger of irritation for eyes, skin,

mucous membranes and respiratory tract and of asphyxia. Danger represented by

the dirt collected from the environment (germs and chemical substances). Danger of

crushing between the tank assembly and chassis.

!DANGER

The tank assembly (CT 230) MUST ALWAYS BE raised and lowered using the

handles incorporated in the tank (fig. C, ref. 3).

ENGLISH

!DANGER

When the tank assembly (CT230) is raised, the gas spring on the left side of the

machine (fig. T) must be locked in place by turning the green ring to the closed

padlock position to prevent the tanks from closing accidentally.

B -Control panel danger of short circuit.

C -Bottom of washing head: danger due to brush rotation.

D -Rear wheels: danger of crushing between the wheel and chassis.

E -Battery compartment: danger of short circuit between the battery poles and presence

of hydrogen during charging.

F -Side brushes: danger due to brush rotation.

3.4. Accessories

•Bristle brushes: for washing delicate floors and polishing;

•Polypropylene brushes: for normal floor washing;

•Tynex brushes: for removing accumulated stubborn dirt on resistant floors;

•Drive disks: enable the following disks to be used:

∗Yellow disks: for washing and polishing marble and similar

surfaces;

∗Green disks: for washing resistant floors;

∗Black disks: for thorough washing of resistant floors with

stubborn dirt.

•CHEM DOSE (CT 230 only) (fig. G): system for controlling detergent independently

from the detergent tank.

4. SAFETY INFORMATION

4.1. Safety regulations

Read the "User Manual" carefully before start-up and use or before performing

maintenance or any other work on the machine.





IMPORTANT

Rigorously respect all instructions in the Manual (in particular those relating to

danger and important information) and on the safety plates fitted to the machine.

The Manufacturer declines all liability for damage to people or things resulting from

failure to observe the instructions.

The appliance must be used exclusively by persons trained in its use and/or who have

demonstrated their ability and have been expressly instructed to use the appliance.

The machine must not be used by minors.

The machine must not be used for purposes other than those for which it was expressly

designed. Scrupulously respect all safety standards and conditions applicable to the type

of building in which the machine is to be operated (e.g. pharmaceutical companies,

hospitals, chemicals, etc).

Do not use the machine in places with inadequate lighting or explosive atmospheres, on

public roads, in the presence of dirt hazardous to health (dust, gas, etc) and in unsuitable

environments.

The machine is designed for temperatures of between +4°C and +35°C when in use and

between +0°C and +50°C when not in use.

ENGLISH

The machine is designed to work in a humidity of between 30% and 95%.

Never use or pick up flammable liquids or explosives (e.g. petrol, fuel oil, etc), flammable

gases, dry dusts, acids and solvents (e.g. paint solvents, acetone etc) even if diluted.

Never pick up flaming or incandescent objects.

Never use the machine on slopes or ramps of more than 16%. In the case of slight

slopes, do not use the machine transversally, always manoeuvre with care and do not

reverse. When transporting the machine on steeper ramps or slopes, take the utmost

care to avoid tipping up and/or uncontrolled acceleration. Move the machine on ramps

and/or steps only with the brush head and squeegee raised.

Never park the machine on a slope.

The machine must never be left unattended with the motors on. Before leaving it, turn the

motors off and make sure it cannot move accidentally by putting the parking brake on and

disconnecting it from the power supply.

Always pay attention to other people, children in particular, present in the place where you

are working.

Children must be supervised to make sure they do not play with the appliance.

The appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

Never use the machine to transport people or things or to tow things. Do not tow the

machine.

Never rest objects of any weight on the machine for any reason.

Never obstruct ventilation and heat dispersion slits.

Never remove, modify or circumvent safety devices.

Numerous unpleasant experiences have shown that a wide range of personal objects

may cause serious accidents. Before beginning work, remove jewellery, watches, ties,

etc.

The operator must always use personal protection devices: protective apron or overalls,

non-slip waterproof shoes, rubber gloves, protective goggles and ear protectors and mask

to protect the respiratory tract.

Keep the hands away from moving parts.

Never use detergents other than those specified. Follow the instructions on the relative

safety sheet. Detergents should be kept out of reach of children. In the event of contact

with the eyes, wash immediately with abundant water. If swallowed, consult a doctor

immediately.

Make sure the power sockets used for the battery charger are connected to a suitable

earth system and protected by differential thermal solenoid switches.

Make sure the electrical characteristics of the machine (voltage, frequency, absorbed

power) given on the rating plate are the same as those of the mains electricity supply.

It is indispensable to respect the battery manufacturer's instructions and current

legislation. The batteries should always be kept clean and dry to avoid surface leakage

current. Protect the batteries from impurities such as metal dust.

Never rest tools on the batteries as this could cause short circuit and explosion.

When using battery acid, always follow the relative safety instructions scrupulously.

Battery charger (OPTIONAL): check the power cable regularly for damage. If the power

cable is damaged, the charger must not be used.

In the presence of particularly strong magnetic fields, assess the possible effect on the

control electronics.

Never wash the machine with water jets.

The fluids collected contain detergent, disinfectant, water and organic and inorganic

material. They must be disposed off in accordance with current legislation.

In the case of malfunction and/or faulty operation, turn the machine off immediately

(disconnecting it from the mains power supply or batteries) and do not tamper. Contact a

service centre authorised by the Manufacturer.

All maintenance operations must be performed in an adequately lit place and only after

disconnecting the machine from the power supply.

ENGLISH

!DANGER

When the tank assembly (CT230) is raised, the gas spring on the left side of the

machine (fig. T) must be locked in place by turning the green ring to the closed

padlock position to prevent the tanks from closing accidentally.

The tank assembly MUST ALWAYS BE lowered/raised using the handles incorporated in

the tank (fig. C, ref. 3). Danger of crushing the limbs.

The tank assembly (CT 160 – CT 230) MUST ALWAYS BE lowered/raised with the tanks

empty.

All work on the electrical system and all maintenance and repair operations other than

those explicitly described in this manual must be performed by specialised personnel

expert in the sector only.

Only original accessories and spare parts supplied by the Manufacturer may be used in

order to guarantee safe problem-free operation of the machine. Never use parts removed

from other machines or from other kits.

This machine has been designed and constructed to provide ten years' service from the

fabrication date shown on the rating plate. After this time, whether the machine has been

used or not, it should be disposed of according to current legislation in the country in

which it is used:

- the machine must be disconnected from the power supply, emptied of liquids and

cleaned;

- the product is classified as WEEE type special waste and is covered by the

requisites of the new environmental protection regulations (2002/96/EC WEEE). It

must be disposed of separately from ordinary waste in compliance with current

legislation and standards.

Special waste. Do not dispose of with ordinary waste.

Alternatively the machine must be returned to the Manufacturer for a complete overhaul.

If you decide to stop using the machine, you are recommended to remove the batteries

and dispose of them at an authorised collection centre.

You should also make sure that all parts of the appliance which could represent a hazard,

particularly to children, are made safe.

ENGLISH

5. HANDLING AND INSTALLATION

5.1. Lifting and transporting the packaged machine





IMPORTANT

During all lifting operations, make sure the packaged machine is firmly anchored to

avoid it tipping up or being accidentally dropped.

Always load/unload lorries in adequately lit areas.

The machine, packaged on a wooden pallet by the Manufacturer, must be loaded using

suitable equipment (see EC Directive 2006/42 and subsequent amendments and/or

additions) onto the transporting vehicle. At destination, it must be unloaded using similar

means.

The squeegees are packed in cardboard boxes without pallet.

A fork lift truck must always be used to lift the packaged body of the machine. Handle

with care to avoid knocking or overturning the machine.

5.2. Checks on delivery

When the carrier delivers the machine, make sure the packaging and machine are both

whole and undamaged. If the machine is damaged, make sure the carrier is aware of the

damage and before accepting the goods, reserve the right (in writing) to request

compensation for the damage.

5.3. Unpacking





IMPORTANT

When unpacking the machine, the operator must be provided with the necessary

personal protection devices (gloves, goggles, etc) to limit the risk of accident.

Unpack the machine as follows:

• cut and remove the plastic straps using scissors or nippers;

• remove the cardboard;

• remove the bags in the battery compartment and check the contents:

- use and maintenance manual, declaration of conformity, guarantee certificate;

- battery bridges with terminals

- connector for battery charger;

• depending on the model, remove the metal brackets or cut the plastic straps fixing the

machine chassis to the pallet;

• using a sloping ramp, push the machine backwards off the pallet;

• unpack the brushes and squeegee;

• clean the outside of the machine in respect of safety regulations;

• once the machine is clear of the packaging, the batteries can be installed (see relevant

paragraph).

The packaging may be kept as it can be reused to protect the machine if it is moved to

another site or to a repair workshop.

Otherwise it must be disposed off in compliance with current legislation.

5.4. Batteries

Two different types of battery may be installed on these machines:

•tubular leak-proof batteries: the electrolyte level must be checked regularly. When

necessary, top up with distilled water until the plates are covered. Do not overfill (5 mm

max. above the plates).

•gel batteries: this type of battery requires no maintenance.

ENGLISH

The technical characteristics must correspond to those indicated in the paragraph on the

technical specification of the machine. The use of heavier batteries could seriously

jeopardise manoeuvrability and lead to the brush motor overheating. Batteries with a

lower capacity and weight will require charging more frequently.

They must be kept charged, dry and clean and the connections must be tight.

i INFORMATION

Follow the instructions below to set the machine’s software for the type of battery

installed:

1. with the machine off, hold the buttons P1 (fig. B, ref. 1) and P3 (fig. B, ref. 2) down

simultaneously and then start the machine by turning the ignition key (fig. B, ref. 3)

to "1".

2. press the settings button (fig. B, ref. 4) 3 times.

3. press the "flow regulation" buttons (fig. B, ref. 5) to select the type of battery

installed on the machine "ACd" for acid battery (tubular leak-proof batteries) or

"GEL" (GEL batteries).

4. memorise the parameter displayed by holding the settings button (fig. B, ref. 4)

down until the battery voltage is displayed.

5.4.1. Batteries: preparation

!DANGER

While installing or performing maintenance on the batteries, the operator must be

provided with the necessary personal protection devices (gloves, goggles, overalls,

etc) to limit the risk of accident. Keep away from naked flames, avoid short

circuiting the battery poles, avoid sparks and do not smoke.

The batteries are normally supplied filled with acid and ready for use.

If the batteries are dry, before mounting them on the machine, proceed as follows:

• remove the caps and fill all elements with specific sulphuric acid solution until the

plates are entirely covered (this requires at least a couple of passes for each element);

• leave for 4-5 hours to allow the air bubbles to come to the surface and the plates to

absorb the electrolyte;

• make sure the level of electrolyte is still above the plates and if necessary top up with

sulphuric acid solution;

• close the caps;

• mount the batteries on the machine (following the procedure described below).

Before starting up the machine for the first time, charge the batteries as follows.

5.4.2. Batteries: installation and connection

!DANGER

Check that all switches on the control panel are in the "0" (off) position.

Make sure you connect the terminals marked with a "+" to the positive poles of the

battery. Do not check the battery charge by sparking.

Follow the instructions given below meticulously as shortcircuiting the batteries

could cause them to explode.

CT160

•Make sure the dirty water tank is empty and empty it if necessary (see relevant

paragraph).

•Lift the dirty water tank (fig. C, ref. 5) and tilt it backwards to access the battery

compartment (fig. C, ref. 2) from the top, Rotate the seat cowling (fig. C, ref. 4)

forwards.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Dibo Scrubber

Dibo

Dibo CT15 Guida all'installazione

Manuali Scrubber popolari di altre marche

Olympus

Olympus M200H Manuale utente

Clarke

Clarke BEXT 100H Manuale di installazione e funzionamento

JOHNY VAC

JOHNY VAC JVC70BCT Manuale utente

RCm

RCm Elan Series Manuale

Kärcher

Kärcher B 120 W Manuale utente

Truvox

Truvox Orbis MotorScrubber 20 Manuale utente

Numatic

Numatic TTB 4045/100 Manuale utente

U.S. Products

U.S. Products PEX 500-C-TICK Istruzioni operative

Mclennan

Mclennan C510 Manuale utente

Tennant

Tennant T20 LPG Manuale utente

Columbus

Columbus ARA 66 BM 100 Manuale utente

Numatic

Numatic TTV 678G / 300T Manuale utente

American-Lincoln

American-Lincoln 505-945 Manuale utente

FIORENTINI

FIORENTINI ET 65-75 Manuale utente

Floorpul

Floorpul ruby 48 blt Guida utente

Onyx

Onyx RX-34 Manuale utente

Dustbane

Dustbane Hurricane 400 Manuale utente

Sana

Sana EUJ-702 Manuale utente