Digi-Pas DWL2000XY Manuale utente
Digi-Pas
Innovation & Technology Driven™
USER MANUAL
2-Axis Precision Digital Level
Model: DWL2000XY
REVISION 1.00
Note: Contents in this instruction manual is continuously updated, please check Digi-Pas website for latest version.
®
Distributed by:
Trick-Tools
80 Truman Road
Pella, IA 50219
Phone:1-877-VAN-SANT
E-mail: sales@trick-tools.com
Here at Trick Tools we believe that our customers deserve the best
value in their tool and equipment purchases. We are constantly at
work searching out a variety of high quality, high performance tools
to oer at the best prices possible. Our commitment to you is that
we will not oer “cheap junk” anywhere on our website. You, the
customer, help us to evaluate our products constantly and as soon as
an ongoing quality issue is uncovered we will correct it or disconnue
that product immediately. We hope to earn your connued trust.
INTELLECTUAL PROPERTY
Digi-Pas®Products were manufactured under ISO9001 & ISO14001 standards,
tested to comply by the followings certification bodies:
© 2012 JSB TECH Pte Ltd. All rights reserved. Digi-Pas®logo is registered trademarks of JSB TECH Pte Ltd.
This manual contains propriety information, which is protected by copyrights. All rights
are reserved. No part of this manual may be photocopied, reproduced, redistributed or
translated to another language without prior written consent of JSB TECH Company.
The information in this manual was correct at the time of printing, stored in CD or
uploaded in the Company website. However, JSB TECH will continue to improve
products and reserves the rights to change specification and maintenance procedures at
any time without prior notice.
© 2012 JSB TECH Pte Ltd. All rights reserved.
CONTENTS
CHAPTER 1: DEVICE OVERVIEW
- Technical Specification
- Overview
CHAPTER 2: SETTING UP
- Operating Procedure
- Mounting Device on Fixture
CHAPTER 3: USER INTERFACE
- Single Axis Mode Interface
- Dual Axis Mode Interface
- Main Menu Icon Functions
CHAPTER 4: FEATURES AND SETTING
- Absolute Level
- Alternate Zero
- Setting Menu
CHAPTER 5: STORAGE AND CLEANING
CHAPTER 6: WARRANTY
APPENDIX: USER CALIBRATION
© 2012 JSB TECH Pte Ltd. All rights reserved.
CHAPTER 1: DEVICE OVERVIEW
Technical Specification
DWL2000XY
Measurement Range
(Single Axis Mode)
0.00° to ± 90.00°
Measurement Range
( 2-Axis Mode)
0.00° to ± 3.00°
Resolution
0.01° (175µm/M) (0.002 in/ft)
Accuracy
±0.02° at 0.00° ~ ± 2.00° (349µm/M)
(0.004 in/ft) (72 Arcsec)
±0.04° at other angle
Repeatability
0.01° (175µm/M) (0.002 in/ft)
Cross Axis Error
Negligible (± 0.0025°)
Display
Colour TFT LCD
Power Supply *
4 x AAA 1.5V Batteries / USB
Material
PC ABS / Aluminium
Connectivity
USB 2.0 Cable (≤5 metre)
PC SYNC Software
Professional Edition (Optional)
Operating Temperature
-10°C to +50°C (Calibrated)
14°F to 122°F (Calibrated)
Dimension (mm)
188 x 62 x 37
Nett Weight (Approx.)
580 gram
User Self Calibration
Yes
Specifications are subject to change without notice.
*Alterative Device power can be obtained from External USB Power Source .
Note:
Product performance to specification are verified by Accredited Calibration & Test Providers in USA, Japan, UK and
Germany to conform with NIST, JIS, UKAS & DIN under the International Laboratory Accreditation Cooperation (ILAC)
and American Association for Laboratory Accreditation (A2LA). For more information, please visit
“www.digipas.com/Calibration.html” .
© 2012 JSB TECH Pte Ltd. All rights reserved.
Device Overview
USB Port:
- USB power supply
- PC Synchronization
- Firmware update
CAL: Activate calibration mode
HOLD: Freeze display value
- Scroll right
MODE: Change the function and display
mode
- Selection the function
UNIT: Change the unit (⁰(degree), mm/M, In/FT)
of the measurement
- Scroll left
Buzzer sound alert
LCD Colour graphic digital display
Battery Compartment of 4 x “AAA” size 1.5V batteries.
-Observe the polarity of the batteries indicated on the top of the battery cover
ON/OFF: Power On/Off
- Escape from Mode function
© 2012 JSB TECH Pte Ltd. All rights reserved.
CHAPTER 2: SETTING UP
Operation Procedure
1. Insert 4 pieces of "AAA" batteries into the battery compartment and press ON/OFF button. Alternatively,
insert USB power source to the USB Port to power up the device. Take note that the device performance
might be affected when poorly regulated USB power source is used.
2. Allow sufficient time for device to warm up and stabilise after turning on the device.
3. Device ready to use.
Note: For maximum accuracy, perform calibration (refer to APPENDIX: User Calibration) or Absolute
Level (refer to Chapter 4: Absolute Level for more details) before measurement.
Mounting Device On Fixture or Work Piece
The two threaded holes are provided for mounting the device onto user-defined fixtures/machinery.
To mount the device onto user’s defined fixture or work piece. Remove both the set screw (M5), then
replace with appropriate type of screws specified by user.
Battery: 4 x “AAA” size 1.5V batteries
(Take note on the battery’s polarity as indicated on top of the battery cover)
User defined fixture/machinery
USB Port
© 2012 JSB TECH Pte Ltd. All rights reserved.
CHAPTER 3: USER INTERFACE
Single Axis Mode Interface
Single Axis Mode Display Screen and Button Function
Single Axis Mode Operation
Place the digital level on the surface to be measured.
Please ensure the contact surfaces of the device and measuring plane
are clean and free from dust particles.
The green arrow sign on display indicates the higher side.
User may “freeze” the screen by pressing the HOLD button.
The icon pops up to indicate the screen is paused. To
resume operation, press the hold button once.
OFF
HOLD
MAIN MENU
MEASUREMENT
UNITS
MEASUREMENT
UNITS
BATTERY
LEVEL
DIGITAL
READING
SOUND
ALERT
© 2012 JSB TECH Pte Ltd. All rights reserved.
Dual-Axis Mode Interface
Dual-Axis Mode Display Screen and Button Function
Dual-Axis Mode Operation
Place the digital level on the surface to be measured.
Please ensure the contact surfaces of the device and measuring plane
are clean and free from dust particles.
The “Target Ball” or “Bull Eye” move towards the measured
position similar to traditional "Bubble" vials. The green arrow
sign on display indicates the higher side of plane.
Once the measurement stabilizes, the “Target Ball” or “Bull
Eye” blinks.
BATTERY LEVEL
MEASUREMENT
UNITS
MICROMETER
VERTICAL (Y) AXIS
DIGITAL READING
HORIZONTAL (X) AXIS
DIGITAL READING
SOUND ALERT
OFF
HOLD
MAIN MENU
MEASUREMENT
UNITS
© 2012 JSB TECH Pte Ltd. All rights reserved.
Main Menu Icon Screen Display and Button Function
Main Menu Icon Features
ABSOLUTE LEVEL SETTING
Enable user to ensure each measurement reading is in accordance to
maximum device accuracy specified.
ALTERNATE ZERO SETTING
Enable user to measure relative angles at a common plane with
respect to a reference angle. Set any angle to 0.00⁰as a reference.
SETTING MENU
Enable user to modify various parameters of the device.
HELP MENU
Enable user to have a quick and easy reference on Device’s button
configuration.
TITLES
CURSOR
ICONS
EXIT MAIN MENU
SCROLL RIGHT
SELECT / ENTER
SCROLL LEFT
Indice
Altri manuali Digi-Pas Livello laser
