digicon catrax master Manuale utente
1
Product Manual
master
2
3
Copyright– Digicon S.A.
Electronic Control for Mechanics – 2018
All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, translated into any language
or computer language in any electronic, magnetic, optical, chemical, manual way,
or otherwise, without the express written permission from .Digicon S.A
Code: 069.31.251
English
Version: 07
This was ted by:manual elabora Digicon S.A. Controle Eletrônico para Mecânica
Documentation Sector - EDS
master
“At the end of a product's life cycle dispose according with local policy” .
4
Contents
master
1. Important instructions ............................................................................
2. Orientations ...........................................................................................
3. Introduction ..........................................................................................
4. Features of .....................................................................Catrax Master
4.1 Operation ......................................................................Catrax Master
5. Installing/Assembling ..............................................................................
5.1 Unboxing .............................................................................................
5.2 Floor drilling and column fixation ............................................................
5.3 Assembling the arms ............................................................................
5.4 Accessing after assembly ................................................Catrax Master
6. Optional items .......................................................................................
6.1 Rear closure kit ....................................................................................
6.2 Collecting box kit .................................................................................
6.2.1 Connection of collecting kit to control board .........................................
6.3 Operational pictogram kit ......................................................................
6.4 Orientation pictogram kit .......................................................................
6.5 Electronic counter kit ............................................................................
6.6 Power supply .......................................................................................
6.7 Control board .......................................................................................
6.7.1 Inputs...............................................................................................
6.7.2 Outputs ............................................................................................
6.7.2.1 Return signals .................................................................................
6.5.2.2 Electromagnets ...............................................................................
6.7.2.3 Sound alarm ...................................................................................
6.7.2.4 Connection scheme .........................................................................
6.7.2.5 Pictogram ......................................................................................
6.7.2.6 Pictrogram connections ....................................................................
6.7.3 Configuration od control board - Switch ds1 ...........................................
6.7.4 Examples of some configurations .........................................................
6.7.5 Serial configuration ............................................................................
6.8 Anti-panic system .................................................................................
6.8.1 Power connection ...............................................................................
6.8.2 Assembling the arms ..........................................................................
6.8.3 Maintenance tests ..............................................................................
7. Maintenance ..........................................................................................
7.1 Preventive and corrective routine maintenance .........................................
7.2 Solving problems ..................................................................................
8. Technical characteristics ..........................................................................
8.1 Dimensions ..........................................................................................
9. Cleaning ...............................................................................................
9.1 Maintenance and conservation of stainless steel ........................................
10.Warranty and technical assistance ............................................................
05
06
06
07
08
09
09
10
11
12
14
14
14
15
15
16
16
18
18
20
21
21
21
21
22
22
22
23
23
24
25
26
27
28
29
29
31
32
32
34
34
35
5
1. Important instructions
You can see, below, the symbols that will appear in this manual, signaling
important moments. It is essential to pay attention to them.
TIP: Indicates something Digicon considers important.
CAUTION: Indicates a moment of extreme caution when
handling the equipment/product.
ATTENTION: Indicates a moment when your observation
skills should be extremely productive.
INFORMATION: Presents interesting facts about the
purchased product.
QR CODE: Presents additional information or links with
more details about the presented text.
master
6
2.Orientations
Read the information and instructions of this manual carefully, before using the
product. This ensures the correct use of the equipment and maximum use of its
technical features as well as a prolonged service life.
·This product does not present sealing against the rain, that is, it is designed to be
used indoors.
·Keep this manual for future consultations.
·Digicon reserves its right to alter its products at any moment to adapt them to
more recent technical advancements.
·Digicon maintains its right to alter the information contained in this manual
without previous notice.
Digicon does not provide any contractual warranty concerning the information in
this manual, and cannot be held responsible for errors it may contain and
problems due to its use.
·The information contained in this manual is exclusive property of Digicon and is
protected by copyright laws.
·This manual cannot be reproduced, photocopied or translated, in its entirety or in
part, into any kind of medium, without Digicon's written consent.
3. Introduction
Following a new technological concept focused on solidity and reliability and
counting with innovative design elements, with color variety and widely curved lines,
Digicon has launched the line CATRAX Master.
CATRAX Master serves most technologies of access control currently available,
becoming the best option in the market for access control.
This manual presents a detailed description of the components and working of
CATRAX Master.
To see our complete catalogue, visit www.digicon.com.br.
master
7
4. Features of Catrax Master
CATRAX Master, an access controller in the model blockage, presents three
bidirectional, equidistant arms at 120 degrees with brushed stainless steel (AISI
304) finishing.
The structure of can present external finishing in brushed stainlessCATRAX Master
steel (AISI 304) or 1020 carbon steel with electrostatic painting in black epoxy
powder. It has reinforced structure, fully rounded corners, and non-exposed screws,
offering space and comfort for any access control solution. It also has room for no-
break and collecting box (optional items)
Aiming at facilitating assembly and maintenance, the column CATRAX Master
presents a U-shaped internal support (mounting rack) with standard holes for the
fixation of additional electronic boards. Moreover, the clients, according to their
needs, can add additional holes. Access to the mounting rack is done through a key
with secret, whose removal and insertion are extremely easy.
A plastic cover and a stainless steel sheet compose the upper panel. The cover, made
of injected plastic, can be purchased in the colors green, burgundy, or black or in any
other color desired, on demand. Optionally, the cover can present a slot for the
reading of magnetic cards/badges and barcodes.
The upper cover in stainless steel allows easy configuration and low-cost
customization of the product. The sheet can also present slots for optional items,
such as operational pictogram (on top), orientation pictogram (side), collecting
box inlet, display kit or a combination of these items.
Besides compatibility with most available technologies, Digicon can provide the
following optional items: collecting kit with box, pictogram kit, counter kit, power
supply, and display kit.
master
8
4.1 Catrax Master operation
In the basic mechanism, has a two-dimensional rotation systemCATRAX Master
with two 12 Vcc electromagnets for activating the locks and two optical sensors that
can provide the signal for the activation of the electromagnets and passage
clearance.
In the electronic model, which includes a microprocessor control board (optional), a
signal enabling passage is sent through one of the inputs, depending on the passage
direction. If this signal is recognized, the equipment will allow the turning of the arm
of . After half of the turning is complete (60 degrees), a 400
CATRAX Master
milliseconds returning signal will be sent, informing the passage direction. After the
signal, the arm cannot be returned to the previous position.
Depending on the model and configuration, if the passage is forcedCATRAX Master
without the enabling signal, an electromagnet will be activated to prevent turn. In
addition, the equipment can emit a signal for a sound alarm and/or the exhibition of a
red X on the upper panel display (models with pictogram). In this case, a return signal
will be sent, indicating that the turnstile was forced, informing the direction of turn.
master
9
5.Installing/Assembling Catrax
Master
5.1 Unboxing
As the items inside the package can vary (depending on the client's requests), it is
important to perform a cautious visual inspection before installing and assembling the
turnstile. A checklist that works as a guide during inspection accompanies all Digicon
packages.
ATTENTION: To avoid losses, the screws and the wrenches used for
assembling the are attached to the box containing theCATRAX Master
arms. Before discarding the packing materials (cardboard and plastics),
make sure all the items in the checklist are accounted for.
Orientation
pictogram
(optional)
Lock accessing
column
Lock accessing
column
External cover
Central cover
Column
Column door
Arm
Digital counter
(optional)
Bidirectional arm:
From left to right
From right to left
master
10
ATTENTION:Since the installation requires floorCATRAX Master’s
drilling, it is important that the location be chosen carefully.
5.2 Floor drilling and column fixation
Before installing , check:CATRAX Master
1. The place chosen for the installation.
2. If there is a power source or electric socket nearby (ducts for connection).
3. If the place chosen is adequate for the installation of the access controller
(indoors).
4. If access to the the locks is clear.CATRAX Master's
5. If there will be enough space for the arms after is assembled. For
CATRAX Master
more details on the equipment's dimensions, see item 8. Technical characteristics.
6. If the floor is in conditions to receive anchor bolts (minimum of 4 cm of FCK15
M.P.A. concrete or equivalent).
Once you observe these recommendations, proceed to the installation:
1. rill the floor with 3/8” drills (then use a 12mm or the ½” drill). Make two holes inD
each column of , according to the measures indicated in the image
CATRAX Master
below:
2. Clean the holes, removing any debris from drilling.
3. Place the external part of the bolts in the holes. Leave about 25mm of the bolt out of
the hole.
4. Position the column and fasten it to the floor with the four screws that accompany
the bolts. Use a flex-head socket wrench with ¾'' or an articulated socket wrench.
master
5
(0,196")
209
(8,228")
30 (1,181")
80
(3,149")
941
(37,047")
1001
(39,409")
12,5 (4X)
35
(1,377")
Indice
Altri manuali digicon Tornello
digicon
digicon dflow Manuale utente
digicon
digicon Turnstile Duo Manuale utente
digicon
digicon dGate UW900 Manuale utente
digicon
digicon CATRAX Plus Manuale utente
digicon
digicon Catrax clip Manuale utente
digicon
digicon dflow Manuale utente
digicon
digicon dGate AW Manuale utente
digicon
digicon CATRAX Plus Manuale utente
