digicon dflow Manuale utente
1
Product Manual
11
1
2
2
3
Revision Date Reviser History
07 29/APR/2020 ŸBruno Hayashi
Beal
ŸMário Arand
ŸNew manual layout;
ŸContent update.
4
3
After the product's service life ends, dispose ofi t according to the National
Solid Waste Policy.
Copyright– Digicon S.A.
Controle Eletrônico para Mecânica – 2020
Code: 069.31.220
Revision 07
This manual was elaborated by: Digicon S.A. Controle Eletrônico para Mecânica
Documentation Sector - EDS
All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, translated into any
language or computer language in any electronic, magnetic, optical,
chemical, manual way, or otherwise, without express written permission
from Digicon S.A.
5
4
Índice
06
06
06
07
09
09
11
14
14
14
15
16
19
22
24
25
25
27
27
31
31
32
32
33
33
33
34
34
35
37
38
40
40
40
40
40
41
1. ........................................................................................................Guidelines
2. .........................................................................................Environmental issues
3. ............................................................................................Additional manuals
4. ...........................................................................................Safety instructions
5. .....................................................................................................Introduction
6. ..............................................................................Characteristics and operation
7. .............................................................................................................Models
8. .......................................................................................................Installation
8.1 ......................................................................................Installation site
8.2 .....................................................................................Package content
8.3 ....................................................................................Accessing dFlow
8.4 ............................................................................Drilling and anchorage
8.5 .............................................................Fixating and powering the sensor
8.6 .............................................................Routing of interconnection cables
8.7 .....................................................Power connection and external network
9. .....................................................................................Powering the equipment
9.1 ...................................................................................Important checks
9.2 ..................................................................Turning on the circuit breaker
10. ........................................................................Configuration via selector switch
11. ...............................................................................................Optional items
11.1 .......................................................................................Card collector
11.2 Display ................................................................................................
11.3 No break .............................................................................................
11.4 ....................................................................................Bar code reader
11.5 ..................................................................Access control module - MCA
11.5.1 .................................................................................Antennas
11.5.2 ................................................................................Biometrics
11.5.3 ........................................................................Bar code reader
12. ...................................................................................Technical characteristics
12.1 ..........................................................................................Dimensions
12.2 .................................................................................Other information
13. ...................................................................................Preventive maintenance
14. .........................................................................................................Cleaning
14.1 ....................................................Maintenance and conservation of doors
1 .2 Maintenance and conservation passage control sensor4 ...............................
1 .34 Maintenance and conservation of dFlow (glasses and stainless steel sheets)..
15. .....................................................................Warranty and technical assistance
6
1.Guidelines
ŸRead the information carefully before using the product. This ensures the correct use
of the equipment and maximum use ofi ts technical features as well as prolonged
service life.
ŸThis product does not present sealing against rain, that is, it is designed to be used
indoors.
ŸThis product was not designed to be placed directly under sunlight.
ŸKeep this manual for future consultations.
ŸDigicon reserves its right to alter the characteristics ofi ts products at any moment to
adapt them to more recent technological advancements.
ŸDigicon maintains its right to alter the information contained in this manual without
previous notice.
ŸDigicon does not provide any contractual warranty concerning the information in this
manual and cannot be held responsible for errors it may contain and problems due to
its use.
ŸThe information contained in this manual is exclusive property of Digicon and is
protected by copyright laws.
ŸThis manual cannot be reproduced, photocopied or translated, in its entirety or in
part, into any kind of medium, without Digicon's written consent.
ŸThe equipment described here is customizable, that is, this manual describes all
possible models and they may not reflect, necessarily, the model purchased by the
customer.
2.Environmental issues
The materials used in the product packaging are easily separated (screws, bubble
wrap, wood, cardboard), which makes disposing of the items more accessible.
The dFlow equipment has recyclable and/or reusable materials in its building. In case
of exchange of parts or components, dispose of the parts with specialized services.
In case of disposal of equipment, make sure to follow the local valid regulations.
3. Additional manuals
Besides this manual, we offer other three documents:
ŸIntegrator manual
ŸSupport and maintenance manual
ŸWork plan manual
7
4. Safety Instructions
This manual has several safety messages: try to read and follow them in order to
promote your safety and that of third parties.
ŸApplicable symbols:
ŸTerminology:
The terms defined below are used in this document. The definitions are based on those
found in safety regulations in order to direct tasks for a certain target audience.
Technical professiona:lthe term applies to trained or qualified people who have
permission to install or replace technical equipment or to offer technical support. It is
recommended that the technical professional use his experience and technical abilities
to avoid possible injuries regarding himself and others due to the risks in areas of
restricted access.
User and operato:rthe terms user and operator apply to people who are not
technical professionals.
ŸInformative
It indicates important instructions concerning operation or maintenance.
It indicates a powered terminal where dangerous voltage may be present.
It indicates a protective ground wire.
WARNING
- Electrical shock can cause serious personal injuries and even death;
thus, avoid direct contact with dangerous voltages while handling the
equipment.
- Ground wiring is essential for safe operation: make sure the power
network meets this requirement safely.
- Only qualified technical professionals are allowed to install and
perform maintenance in the equipment.
- Before any maintenance, switch the circuit breaker off to stop
into the equipment.
the power
8
ŸGeneral precautions:
Wristwatch and jewelry– To avoid damages to the equipment and to the operator,
do not wear objects that conduct electricity.
Atmospheric discharges –Do not work on this equipment during atmospheric
discharges.
Labels– Do not remove warning labels. If the item is illegible or damaged, replace it
by a new label.
Children– Do not leave unattended children near the equipment.
ESD– Electrostatic discharge.
I. Keep the components inside the antistatic package until installation.
II. Avoid touching the electronic components when installing a module or board.
WARNING
Avoid electricalshock! Opening or removing the doors of this equipment
can expose it to dangerous voltages.
WARNING
To reduce the risk of electric shock, before maintenance, turn off the power
of the equipment by moving the circuit breaker key to the position OFF.
Leave all maintenance services to qualified technical professionals.
9
5. Introduction
6. Characteristics and operation
NOTE-dFlow is a configurable equipment and can be provided with the option
of closed doors.
When we combine innovation and robustness, design and reliability, we find the best
access control solution. Digicon presents a solution developed to the last detail in order
to offer a new concept to the market. From an intense research process on world
tendencies and a comprehensive engineering work, dFlow is born.
dFlow is the first access controller that perfectly fits into the Free Flow concept. This is a
new way of conceiving access control because its doors remain normally open, while
traditional equipment have barriers in the normally closed position. This paradigm shift
is what differentiates it from a Free Flow currently available.
Even though it seems that equipment is always open, it has doors. They are activated
only when one or more unauthorized people, including tailgating users, try to go through
the equipment. The closing system is fast and progressive, performed by a set of the
exclusive motor control, innovative sensing, and sophisticated algorithm. This results in
a very pleasant and fast experience for authorized users and offers unprecedented
levels of security for the establishment.
10
The technology developed in Brazil by Digicon detects, with high precision, users
moving in any direction inside the equipment. Such precision originates in the
innovative sensing system, which can be compared to an almost limitless amount of
traditional infrared sensors, thus allowing the doors to remain open for authorized
users and closed to non-authorized people.
Luminous windows made of LED lights follow users during their path inside the equipment.
They can have different colors for each user group. In a school, for example, students can
belong to the green-colored group, educators to the yellow-colored group, and parents to the
blue-colored group. Users without validation will be displayed in red. dFlow's flexibility allows
other user groups to be identified by an extensive range of colors, thus providing more
information to the access system.
Altri manuali per dflow
1
Indice
Altri manuali digicon Tornello
digicon
digicon catrax master Manuale utente
digicon
digicon dflow Manuale utente
digicon
digicon dGate UW900 Manuale utente
digicon
digicon Catrax clip Manuale utente
digicon
digicon dGate AW Manuale utente
digicon
digicon CATRAX Plus Manuale utente
digicon
digicon CATRAX Plus Manuale utente
digicon
digicon Turnstile Duo Manuale utente
