DigiSender Plug'n'Go DX2000-LCD Manuale utente
WATCH A VIDEO
INSTALLATION
& TROUBLESHOOTING GUIDE
Available online at: www.aei.eu/video
WATCH A VIDEO
INSTALLATION
& TROUBLESHOOTING GUIDE
Available online at: www.aei.eu/video
080410-2
DigiSender
Plug’n’Go™ LCD
MODEL: DX2000-LCD
5.8GHz Single Input ‘Plug Style’ Wireless AV Sender
®
IMPO TANT: ALWAYS KEEP THIS INST UCTION MANUAL FO FUTU E EFE ENCE
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Ple se re d this instruction m nu l c refully prior to inst ll tionPage 02
Table of Contents
Introduction 03
Step 1 - Unpack your Plug’n’Go™ LCD 04
Step 2 - Install the Transmitter 05
Step 3 - Install the Receiver 06
Step 4 - Using the Plug’n’Go™ LCD 07-08
Plug’n’Go™ LCD Advanced Function 08
Upgrades and Accessories 09
Troubleshooting 10-13
Picture Problems 10-11
Audio Problems 12
Problems Controlling Your Source Equipment 13
Technical Support 14
Declaration of Conformity 15
Ple se re d this instruction m nu l c refully prior to inst ll tion Page 03
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Introduction
Congratulations on purchasing the DigiSender® Plug’n’Go™ LCD - 5.8GHz Single Input ‘Plug Style’
Wireless AV Sender. This product represents state of the art wireless audio and video technology at
exceptional value for money.
You can now enjoy DVD quality video and Hi-Fi stereo sound from your Satellite, Cable, Freeview, DVD
or VCR in another room in your home.
Benefit from Com act and Discrete Transmitter and Receiver units, 4 Audio/Video Channels and
unsur assed ease of use with the new DigiSender® Plug’n’Go™ LCD!
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Ple se re d this instruction m nu l c refully prior to inst ll tionPage 04
Step 1: Unpack Your DigiSender® Plug’n’Go™ LCD
All DigiSender® orders are computer weight checked when packed. However, it is a good idea to check
all kit contents are present before proceeding with the installation.
DX2000-LCD Transmitter
1. Transmitter Unit
2. Pre-Wired IR Emitter
3. DigiConnector™ SCART Input
DX2000-LCD Receiver
4. Receiver Unit
5. Pre-Wired IR Sensor
6. SCART Output
1.
2.
3.
4. 5.
6.
Ple se re d this instruction m nu l c refully prior to inst ll tion Page 05
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Step 2: Install the Transmitter
Connect the Transmitter into a Mains Extension
Lead. The positioning of the Tr nsmitter c n ffect
the picture qu lity so being ble to move it is n
dv nt ge.
2.
Connect the DigiConnector™ to your Satellite,
Cable or Freeview box. Use the SCART socket la-
belled ‘TV’ or ‘OUT’. Connect ny existing SCART
le d into the re r of the DigiConnector™.
1.
The DX2000-LCD Transmitter will send the audio and video from a connected source (your Satellite
receiver for example) to the DX2000-LCD Receiver, located in another room in your home.
Press and hold the power button for 5 seconds to
turn the Transmitter on. Pressing the button g in
cycles through the 4 v il ble ch nnels. M ke sure
it is set to ch nnel 1.
3.
Position the IR Emitter in front of your Satellite,
Cable or Freeview box with the lens facing the
equipment’s IR sensor.
4.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Ple se re d this instruction m nu l c refully prior to inst ll tionPage 06
Step 3: Install the eceiver
Connect the Receiver into a Mains Extension
Lead. The positioning of the Receiver c n ffect
the picture qu lity so being ble to move it is n
dv nt ge.
2.
The DX2000-LCD Receiver will pick up the signals being sent by your DX2000-LCD Transmitter and out-
put them to a connected TV.
Press and hold the power button for 5 seconds to
turn the Receiver on. Pressing the button g in
cycles through the 4 v il ble ch nnels. M ke sure
it is set to ch nnel 1.
3.
Locate a vacant SCART socket on the back of your
receiving TV and insert the DigiSender® SCART
cable.
1.
Position the IR Sensor on the top, side or bot-
tom of your receiving TV with the lens facing
out into the room.
4.
Ple se re d this instruction m nu l c refully prior to inst ll tion Page 07
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Step 4: Using the DigiSender® Plug’n’Go™ LCD
Switch on the source equipment (S tellite, C ble,
Freeview, DVD, VCR, etc.).
1.
On the receiving TV, select the SCART channel
assigned to the SCART socket that you plugged
the DX2000-LCD Receiver in to. This m y be l -
belled s SCART, AUX, AV, VIDEO, VCR or .
2.
hen controlling your Satellite, Cable or Free-
view box, point the remote control at the IR Sen-
sor in the receiving location. Ensure you re using
the correct remote control for the source device.
3.
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Ple se re d this instruction m nu l c refully prior to inst ll tionPage 08
Using the DigiSender® Plug’n’Go™ LCD
Advanced Functions
Changing the Audio/Video Channel
The DigiSender® Plug’n’Go™ LCD features 4 Audio/Video Channels. Each of these Audio/Video Chan-
nels slightly changes the frequency on which the DigiSender® Plug’n’Go™ LCD operates. Because
the Audio/Video Channel switch allows you to ‘fine tune’ the frequency on which your DigiSender®
Plug’n’Go™ LCD operates, it is possible to overcome most interference and reception troubles that may
occur.
To change the Audio/Video Channel on your DigiSender® Plug’n’Go™ LCD, simply press the button to
cycle through the 4 available channels.
For your DigiSender® Plug’n’Go™ LCD to function correctly it is very im ortant that the Audio/Video
Channel settings are the same on both the Transmitter and Receiver.
Ple se re d this instruction m nu l c refully prior to inst ll tion Page 09
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Upgrades & Accessories
Addi ional Receiver - DX200-LCDRX
• Get your Satellite channels to additional
TV’s in your home!
• Add as many Receivers as you require to
your DigiSender® system
• Connect to any SCART enabled TV or use
with the OD01PIS Aerial Converter
• Supplied with Power Supply Unit
• Requires existing DigiSender®
Plug’n’Go™ LCD Transmitter
DX2000-LCD - DigiSender® Plug’n’Go™ LCD
Ple se re d this instruction m nu l c refully prior to inst ll tionPage 10
Troubleshooting
Picture Problems
Q: Wha do you see on your second elevision?
The picture is present but
poor qu lity
I still see Bl ck Screen...
WRONG AV CHAN-
NEL SELECTED
1. Switch the Tr nsmitter b ck
on.
2. Ensure the correct SCART
ch nnel is selected on your sec-
ond television. Some televisions
fe ture multiple AV ch nnels for
one or more SCART, phono nd
S-Video inputs.
3. If v il ble try nother SCART
socket on the second television.
POOR RANGE
1. The picture & sound qu lity is
ffected by the Tr nsmitter nd
Receiver’s loc tion. Try position-
ing them in different loc tions.
The Tr nsmitter nd Receiver
should be connected to m ins
extension le d th t c n be
moved.
2. Try the other 3 v il ble
Audio/Video ch nnels ensuring
th t the Audio/Video Ch nnel
setting is the s me on both the
Tr nsmitter nd Receiver.
3. Ensure the units re within the
us ble r nge, norm lly this
would be 40m when p ssing
through 2 ver ge intern l w lls.
Thicker or stone/gr nite w lls
m y lower the us ble r nge of
this device.
RECEIV I N G B L A N K
SIGNAL
1. Switch the Tr nsmitter on.
2. Ensure the Tr nsmitter is con-
nected to your source device
(such s your S tellite, C ble,
Freeview, DVD or VCR).
3. Ensure th t your source device
is switched on.
I now see snowstorm or
blue screen...
I see bl ck or bl nk screen
Switch OFF your DigiSender® TRANSMITTER
Wha do you now see a he second TV?
Altri manuali per Plug'n'Go DX2000-LCD
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali DigiSender Ricevitore
DigiSender
DigiSender HQR DG15RX Manuale utente
DigiSender
DigiSender X2 DG20RX Manuale utente
DigiSender
DigiSender DG45RX Manuale utente
DigiSender
DigiSender DGHDP1 Manuale utente
DigiSender
DigiSender ZX 7 DG45RX Manuale utente
DigiSender
DigiSender DigiSender X7 DG44RX Manuale utente
DigiSender
DigiSender DG440 X7 Manuale utente
