Digital Equipment DECcolorwriter 1000 Manuale utente

Service Manual

DECcolorwriter 1000

Color Printer

Warning

The following servicing instructions are for

use by qualified service personnel only. To

avoid personal injury, do not perform any

servicing other than that contained in

operating instructions unless you are qualified

to do so.

First printing February 1994

Order Number: EK-LF02E-FM.A01

Digital Equipment Corporation

Maynard, Massachusetts U.S.A.

If acquired subject to FAR or DFARS, the following shall apply:

nUnpublished — rights reserved under the copyright laws of the United States.

nRestricted Rights Legend — Use, duplication or disclosures by the government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software at DFARS 252.227-7013, or in subparagraph

P.O. Box 1000, Wilsonville, Oregon 97070-1000.

Adobe™ and PostScript™ are trademarks of Adobe Systems, Incorporated which may be registered in certain jurisdictions.

Times™, Helvetica™, and Palatino™ are trademarks of Linotype-Hell AG and/or its subsidiaries.

Other marks are trademarks or registered trademarks of the companies with which they are associated.

PANTONE®* Colors generated by the DECcolorwriter 1000 are three-color process simulations and may not match

PANTONE-identified solid color standards. Use current PANTONE Color Reference Manuals for accurate colors.

PANTONE Color simulations are only obtainable on these products when driven by qualified Pantone-licensed software

packages. Contact Pantone, Inc. for a current list of qualified licensees.

* Pantone, Inc.’s check-standard trademark for color reproduction and color reproduction materials.

Novell® and NetWare® are registered trademarks of Novell, Inc.

PC/TCP for DOS is based on a set of programs originally designed and developed by the Massachusetts Institute of Technology.

FTP Software has made extensive modifications and enhancements to the M.I.T. programs.

Users safety summary

Terms in manual: CAUTION Conditions that can result in damage to the product.

WARNING Conditions that can result in personal injury or loss of life.

Power source: Do not apply more than 250 volts RMS between the supply conductors or between either supply conductor

and ground. Use only the specified power cord and connector. Refer to a qualified service technician for changes to the cord or

connector.

Operation of product: Avoid electric shock by contacting a qualified service technician to replace fuses inside the product.

Do not operate without the covers and panels properly installed. Do not operate in an atmosphere of explosive gases.

Safety instructions: Read all installation instructions carefully before you plug the product into a power source.

Terms on product: CAUTION A personal injury hazard exists that may not be apparent. For example, a panel may cover

the hazardous area. Also applies to a hazard to property including the product itself.

DANGER A personal injury hazard exists in the area where you see the sign.

Care of product: Disconnect the power plug by pulling the plug, not the cord. Disconnect the power plug if the power cord

or plug is frayed or otherwise damaged, if you spill anything into the case, if product is exposed to any excess moisture, if

product is dropped or damaged, if you suspect that the product needs servicing or repair, and whenever you clean the product.

Ground the product: Plug the three-wire power cord (with grounding prong) into grounded AC outlets only. If necessary,

contact a licensed electrician to install a properly grounded outlet.

Symbols as marked on product:

DANGER high voltage:

Protective ground (earth) terminal:

Use caution. Refer to the manual(s) for information:

WARNING: If the product loses the ground connection, usage of knobs and controls (and other conductive parts) can cause an

electrical shock. Electrical product may be hazardous if misused.

Service safety summary

For qualified service personnel only: Refer also to the preceding Users Safety Summary.

Do not service alone: Do not perform internal service or adjustment of this product unless another person capable of

rendering first aid or resuscitation is present.

Use care when servicing with power on: Dangerous voltages may exist at several points in this product. To avoid

personal injury, do not touch exposed connections and components while power is on.

Disconnect power before removing the power supply shield, soldering, or replacing components.

Do not wear jewelry: Remove jewelry prior to servicing. Rings, necklaces, and other metallic objects could come into

contact with dangerous voltages and currents.

Power source: This product is intended to operate from a power source that will not apply more than250 volts rms between

the supply conductors or between either supply conductor and ground. A protective ground connection by way of the grounding

conductor in the power cord is essential for safe operation.

Service Manual v

Contents

1 General Information

DECcolorwriter 1000 1-2

Plain-paper printing 1-2

Print engine assemblies 1-3

Combination sensors and their meanings 1-5

Transfer roll type sensing 1-5

Media tray type sensing 1-6

Image processor boards 1-7

Rear panel 1-8

Front panel 1-10

Front panel LED service mode error codes 1-11

Specifications 1-12

Regulatory specifications 1-16

2 Installing the Printer and Drivers

Pre-install questions for customers 2-2

Unpacking 2-5

Inventory for the DECcolorwriter 1000 printer 2-5

Setting up the printer 2-7

Cabling the printer 2-8

Connecting the printer to a Macintosh 2-8

LocalTalk connection to a Macintosh 2-8

Connecting the printer to a PC 2-8

Direct connection to a PC 2-8

Connecting the printer to a workstation 2-9

Direct connection to a workstation 2-9

Turning on the printer 2-10

The startup page 2-10

The configuration page 2-11

Driver and communication setup 2-13

Loading the Macintosh driver 2-13

Installing the custom driver for Windows 3.1 2-14

Configuring the custom Windows printer driver 2-14

Updating the standard Microsoft Windows PostScript driver 2-17

Installing the printer driver for OS/2 Version 2 2-17

Configuring the printer's serial port for a PC 2-20

DECcolorwriter 1000 2-20

Using printcap to configure a Unix workstation for the printer's serial port 2-22

vi DECcolorwriter 1000

3 Verifying the Printer and Host Connections

Verifying printing to a Macintosh 3-1

Selecting the printer via the Chooser 3-1

Print the directory from Macintosh 3-2

Verifying that an application communicates to the printer 3-2

Using the Error Handler utility 3-3

Verifying printing to a PC 3-3

DOS connection verification 3-3

Windows 3.1 driver verification 3-4

OS/2 connection verification 3-5

Veryifing printing to a PC using the Error Handler utility 3-6

Verifying printing to a workstation using the Error Handler utility 3-7

4 Key Operator Training

Printer controls and indicators 4-2

Loading media 4-3

Cleaning 4-3

Clearing paper jams 4-4

Warranty information 4-4

Supplies ordering 4-5

5 Theory of Operation

Print engine 5-2

Wax transfer — the engine's printing technology 5-2

The print process 5-2

Plain-paper printing 5-4

Image data 5-5

Creating colors 5-5

Engine control board block description 5-6

CPU 5-7

Interface buffers 5-7

Data controller and line buffers 5-7

Heat controller (dot compensation) 5-7

Thermal head controller 5-8

Thermal head 5-8

Mechanical controller 5-8

Internal test pattern generator 5-8

Service Manual vii

Paper path in operation 5-9

Paper pick-up 5-9

Drum loading 5-11

Printing 5-12

Print unloading 5-14

Power supply 5-15

DECcolorwriter 1000 image processor 5-17

Image rendering technology 5-17

6 Troubleshooting

System power-up sequence 6-1

Print engine troubleshooting 6-2

Verifying image processor operation by using the Test Pattern Generator 6-2

Verifying print engine operation by using its self-test print 6-3

Verifying power supply operation 6-3

Measuring power supply voltages 6-3

Inspecting the power supply fuses 6-5

Testing for a shorted motor 6-6

+24 VDC safety interlocks 6-6

Testing motor resistances 6-8

Media jams and the paper path 6-8

Media-based problems 6-8

Paper-pick errors 6-9

Paper-clamping errors 6-10

Print-eject jams 6-11

Checking the paper-feed motor and drive train 6-11

Media skews passing through the paper path 6-12

Transfer roll jam 6-12

Printing and print quality problems 6-13

Streaks or lines in the print parallel to the long axis of printing 6-13

Streaks or lines in the print parallel to the short axis of printing 6-13

White portion of print is colored 6-14

Color is uneven 6-14

Not printing 6-15

Printing too light or too dark 6-16

Image is offset or cut off 6-16

Wrinkling 6-17

viii DECcolorwriter 1000

Print engine self-diagnostics 6-18

Starting service mode (self-diagnostics) 6-18

Displaying error codes on the front panel 6-18

Problems and solutions 6-19

Print engine error codes and their causes 6-19

Power problems 6-24

Front panel indicators 6-24

Macintosh printing problems 6-25

PC DOS printing problems 6-26

Windows printing problems 6-27

Workstation printing problems 6-28

DECcolorwriter 1000 image processors 6-29

Image processor normal operation indicators 6-29

Image processor hard and soft error indicators 6-29

Verifying the image processor's operation 6-29

Image processor self-diagnostics 6-30

Image processor rear panel switches for self-testing 6-30

The rear panel LED flashing in a regular one flash-per-second rate means no errors were detected

and that the image processor's CPU is running. 6-31

Printing the configuration page 6-31

Resetting the DECcolorwriter 1000’s NVRAM 6-32

7 Cleaning and Maintenance

Cleaning 7-1

Lubrication 7-2

Inspecting 7-3

Replacements 7-4

Service Manual ix

8 FRU Disassembly/Assembly

Required tools 8-1

Lower tray assembly 8-2

Printer cabinet panels 8-3

Paper-feed module 8-5

Accessing the pick roller, aligning roller, and the lower feed roller 8-6

Paper-pick roller, clutch, and paper-empty flag 8-9

Lower aligning roller, clutch, and paper-pass sensorþ1þflag 8-11

Removing the upper aligning roller 8-13

Removing the feedþroller 8-14

Removing the exitþrollers 8-15

Bail roller assembly 8-16

Thermal head 8-17

Drum 8-19

Motors 8-23

Paper-feed motor 8-23

Drum motor 8-24

Transfer roll take-upþmotor 8-25

Thermal head lift motor 8-27

Sensors and switches 8-29

Paper-pass sensorþ1 and paper-empty sensor 8-29

Thermal head position sensors 8-29

Transfer roll mark sensors 8-29

Paper-pass sensorþ2 and trayþsensor 8-30

Transfer roll lowþsensor 8-33

Paper clamp sensor 8-34

Card cage and power supply 8-35

Circuit boards 8-37

Power supply circuit board 8-37

Paper-feed circuitþboard 8-39

Engine control board 8-39

Card cage interconnect board 8-41

I/O board 8-42

Image processor board 8-43

RAM SIMM 8-44

Font module 8-45

xDECcolorwriter 1000

9 Checks and Adjustments

Required tools summary 9-1

Printing test patterns 9-2

Printer self-checks 9-4

Thermal head motor check 9-5

Transfer roll feed check 9-5

Paper-path check 9-6

Tray select 9-6

Reflective sensor auto-calibration 9-7

Switch and interrupt sensor checks 9-8

Calibrating the transfer roll mark sensors (reflective sensors) 9-10

Calibrating the paper clamp sensor (reflective sensor) 9-10

Drum belt tension adjustment 9-11

Top margin adjustment 9-12

Adjusting for best print quality 9-14

Thermal head temperature adjustment 9-14

Thermal head pitch (to correct speckle and wrinkle) 9-16

Paper clamp adjustment (to correct misregistration) 9-18

A Field Replaceable Units List

B Test Patterns

C Wiring Diagrams

D Test Pattern Generator

Index

Indice

Altri manuali Digital Equipment Stampante

Digital Equipment

Digital Equipment DECwriter 110i Manuale utente

Digital Equipment

Digital Equipment LA600 MultiPrinter Guida rapida

Digital Equipment

Digital Equipment LSR 2000 Manuale utente

Digital Equipment

Digital Equipment LA75 plus companion Manuale utente

Digital Equipment

Digital Equipment DEClaser 3200 Manuale utente

Digital Equipment

Digital Equipment LN15 Manuale utente

Digital Equipment

Digital Equipment DEClaser 3200 Manuale utente

Digital Equipment

Digital Equipment DECprinter I Manuale utente

Digital Equipment

Digital Equipment LG06 Manuale utente

Digital Equipment

Digital Equipment LG31 Guida per l'amministratore

Digital Equipment

Digital Equipment LG plus Series Manuale utente

Digital Equipment

Digital Equipment DECLASER 1152 Manuale utente

Digital Equipment

Digital Equipment LA310 Manuale utente

Digital Equipment

Digital Equipment LG plus Series Manuale

Digital Equipment

Digital Equipment DEClaser 1100 Series Manuale utente

Digital Equipment

Digital Equipment DECwriter 500i Manuale utente

Digital Equipment

Digital Equipment DECcolorwriter 120ic Manuale utente

Digital Equipment

Digital Equipment LA310 Manuale utente

Digital Equipment

Digital Equipment LASO Manuale utente

Digital Equipment

Digital Equipment LG06 Manuale

Digital Equipment

Digital Equipment LA50 Manuale utente

Digital Equipment

Digital Equipment PrintServer 32 Manuale utente

Digital Equipment

Digital Equipment Letterprinter 100 Manuale

Digital Equipment

Digital Equipment LGplus Series Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente