WEB POWER SWITCH
Power-On Sequence Delay
When a time value is entered in the All ON sequence delay” field, the
power switch will pause for a period of time before switching each
outlet on in sequence. This delay helps prevent the power surges and
blown circuit breakers which can occur when multiple devices are
switched on simultaneously. A delay of 60 seconds is suggested for
server applications.
You may also enter a screen refresh delay. If Enable screen refresh”
is checked, and a delay value is entered, your browser should
periodically update the status screen.
Power Loss Recovery Modes
The power loss recovery mode setting has three settings which
take effect after a power failure:
1. You can turn all outlets off (all systems will be switched off
until manually turned on later) by checking the first box.
2. You can automatically turn all outlets on using the All ON
sequence delay” described above. Check the second option
to do this.
3. You can return to the same outlet settings that were used
prior to the power loss. The All ON sequence delay” will
also be used in this instance.
User Defined Links
You may link to other power switches, your own web pages, or
remote web sites by entering up to four URLs and descriptions in the
Setup page. For example, enter Site Two Power Switch” in the
description field with a URL of 192.168.0.102” These links appear on
the home page.
Network Settings
A fixed IP address, network mask, gateway, and subnet mask must
be entered in this field.
