Digital Watchdog DWC-MF10M28T Manuale utente

Quick Start Guide

DWC-MF10M28T DWC-MF10M36TIR DWC-MF10M8TIR

WHAT’S IN THE BOX

QSG Manual 1 Set Mount Bolt & Nut

– 2pcs 1 Set

Manual CD 1 Set Mount Plate 1 Set

Template Sheet

for installing by

Bolt & Nut

1 Set Screw & Plastic

Anchor – 3pcs 1 Set

Template Sheet

for installing by Plate 1 Set Tor x Wrench 1 Set

Username: admin Password: admin

Attention: This document is intended to serve as a quick reference page for initial set-up.

It is recommended that the user read the entire instruction manual for complete and proper camera usage.

Tel: 866-446-3595 / 813-888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

Quick Start Guide

Step 1 – PREPARING TO MOUNT THE CAMERA

So Surface Installation

Step 3 – INSTALLING THE CAMERA

Step 2 – CABLING THE CAMERA TO EXTERNAL DEVICES

1. The mounting surface must bear ve times the weight of your camera.

2. Do not let the cables get caught in improper places or the electric line cover to be damaged.

This may cause a breakdown or re.

3. For the installation process, remove the dome cover from the camera module by loosening

the three (3) screws on the dome. Use the wrench provided with the camera.

4. Using the mounting template sheet or the camera itself, mark and drill the necessary holes in

the wall or ceiling.

For soft installation surfaces, use the included

metal mount plate. Fix the mount plate on the

mounting surface using the included screws.

Then, press the bottom case onto the mount

plate. The three bezels on the case will align

and snap lock onto the plate.

6. To use the camera’s water proof wiring:

(1).Install the LAN cable into (a).

(2).(b) will be assembled to (a) with a 1/4 turn.

(3).Thread (c) tightly to (b).

7. Use the camera’s 3-Axis gimbal to adjust the camera’s tilt and angle. The camera’s maximum tilting

angle is 70.

8. Assemble the dome cover over the camera body and detach the protecting lm from the dome bubble.

5. Pass the wires through the mount bracket and make all necessary connections.

a. NETWORK CONNECTIONS – If you are using a PoE Switch, connect the camera using an Ethernet

cable for both data and power.

b. NETWORK CONNECTIONS – If you are using a non-PoE switch, connect the camera to the switch

using an Ethernet cable for data transmission and use a power adapter to power the camera.

Power Requirements Power Consumption

DC 12V

PoE IEEE 802.3atPoE+ / PoE Class 2

LED Of f: 1.92W, 160mA

LED On: 2.7W, 230mA (IR models only)

NETWORK

CONNECTION

POWER

Template

Sheet

Reset

Button

Note: To ensure moisture seal, make sure the o-ring is in place between (a) and (b). In extreme

environments use of an outdoor rated sealer is recommended.

Resetting the camera: To reset the camera, use the tip of a paper clip or a pencil and press the

reset button. Pressing the button for ve (5) seconds will initiate a camera-wide reset of all the settings,

including network settings.

Note: Please see the full product manual for web viewer setup, functions and camera settings options.

4. The camera’s default network information is:

5. To view the camera’s web viewer, click on ‘View Camera Website’.

6. To save the changes made to the camera’s settings, input the ID

and PW of the camera for authentication and click ‘Save’.

7. If the camera needs to be rebooted after the settings were changed, press the ‘Reboot’ button.

The camera will cycle power and will appear back in the search results once the reboot is complete.

Step 4 – DW IP FINDER™

Use the DW IP Finder ™included in the camera’s accessory CD to scan the network and detect all MEGApix®

cameras, set the camera’s network settings, perform rmware upgrade or access the camera’s web client.

Quick Start Guide

Step 5 – WEB VIEWER

Once the camera’s network settings have been

setup properly, you can access the camera’s

web viewer using the DW IP Finder™. To open

the camera’s web viewer:

1. Find the camera using the DW IP

Finder™.

2. Double-click on the camera’s view in

the results table.

3. Press the ‘View Camera Website’.

The camera’s web viewer will open up

in your default web browser.

4. Enter the camera’s username and password (default are admin / admin).

5. If you are accessing the camera for the rst time, install the VLC les in order to view video from the

camera.

Step 3 – INSTALLING THE CAMERA (CONT.)

Installation using Mount Bolt and Screws:

1. Using the template sheet, make and drill the cabling holes on the wall/ceiling.

2. Secure the two long mounting screws to the camera’s base.

3. Pass the wires through the mount bracket and make all necessary connections.

4. Mount the camera to the mounting surface by using the 2 mounting nuts. Rotate the locking discs over

the screws until the camera is held tightly from the mounting surface.

Select DHCP if the internet service is dynamic IP. This will allow the camera to receive its IP address

from the DHCP server.

Select STATIC to manually enter the camera’s IP address, subnet mask, Gateway and DNS information.

Contact your network administrator for more information.

Note: The camera’s maximum tilting angle is 70°

Default TCP/IP information

• IP: 192.168.1.80 • Gateway: 192.168.1.1

• Subnet Mask: 255.255.255.0 • DNS: 168.126.63.1

‘Port Forwarding’ has to be set in your network’s router for

external access to the camera.

Default ID / PW : admin / admin

SearchforCameras

Camera’s

NetworkSe2ngs

ViewCamera’s

ThumbnailView

Camera’sFirmware

CameraUp>me

OpenCamera’sIP

Conﬁgura>onScreen

FilterSearchResults

CameraName,

Model,IPAddress,

andMACAddress

FirmwareUpgrade

Network Setup

1. Run the CD included with the camera and click on the DW IP Finder™le.

2. The software will scan your network for all supported cameras and display the results in the table. Allow up

to 5 seconds for the IP Finder to nd the camera on the network.

3. Select a camera from the list by double-clicking on the camera’s image or clicking on the ‘Click’ button

under the IP Conf. column. The camera’s network information will appear. If necessary, you can adjust the

camera’s network type.

Questo manuale è adatto per i seguenti modelli

Altri manuali Digital Watchdog Telecamera di sicurezza

Digital Watchdog

Digital Watchdog MEGApix PanO DWC-PPVF9Di2TW Manuale utente

Digital Watchdog

Digital Watchdog DWC-LPR650U Manuale utente

Digital Watchdog

Digital Watchdog MC355T Manuale utente

Digital Watchdog

Digital Watchdog DWC-D3661T Manuale utente

Digital Watchdog

Digital Watchdog DWC-D2252DIR Manuale utente

Digital Watchdog

Digital Watchdog MEGApix CaaS DWC-MB44LPRC2 Manuale utente

Digital Watchdog

Digital Watchdog DWC-PTZ37XAL Manuale utente

Digital Watchdog

Digital Watchdog Star-Light DWC-MC253WTIR Manuale utente

Digital Watchdog

Digital Watchdog PIXIM DWC-V365 Manuale utente

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-B7753TIR Manuale utente

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MT95Wi36TW Manuale utente

Digital Watchdog

Digital Watchdog MC421D Manuale utente

Digital Watchdog

Digital Watchdog MEGApix PANO DWC-PVF9M2TIR Manuale utente

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Manuale utente

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MT94WI28T Manuale utente

Digital Watchdog

Digital Watchdog V2262D Series Manuale utente

Digital Watchdog

Digital Watchdog MEGApix DWC-MD72Di28T Manuale utente

Digital Watchdog

Digital Watchdog STAR-LIGHT AHD DWC-D3763TIR Manuale utente

Digital Watchdog

Digital Watchdog Snapit DWC-D4363D Manuale utente

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA583WTIR Manuale utente

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Manuale utente

Digital Watchdog

Digital Watchdog STAR-LIGHT 960H DWC-V6553D Manuale utente

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-D4583WTIR Manuale utente

Digital Watchdog

Digital Watchdog STAR-LIGHT PLUS DWC-B6853WTIRW Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente