Digital Watchdog Star-Light DWC-V7253 Manuale utente

Quick Start Guide Quick Start Guide

1. The mounting surface must withstand ﬁve times the weight of

your camera.

2. Do not let the cables get caught in improper places or the electric

line cover can be damaged. This may cause a short or ﬁre.

3. Detach the camera’s dome cover by loosening the three (3) screws

on the dome using the included torque wrench.

4. Use the mounting template to mark and drill the necessary holes in

the mounting surface.

STEP 1 – PREPARING TO MOUNT THE CAMERA

Pass the wires through the mount bracket and make all

necessary connections. Connect the BNC cable and power

cables to the camera.

STEP 2 – CABLING THE CAMERA TO

EXTERNAL DEVICES

Power requirements Power consumption

12VDC ON LY !

CAUTION! The camera supports

DC power supply only

DC12V: 1.92W

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

DWC-V7253

WHAT’S IN THE BOX

Mount bolts

and nuts 1 set Mounting

template 1

Hex Allen

wrench 1Quick set up

Guide 1

Screws

and plastic

anchors

-2pcs

1 set Test video

cable 1

Protective sheet

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Attention: This document is intended to serve as a quick reference for

initial set up. It is recommended that the user read the entire instruction

manual for complete and proper installation and usage.

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/resources

2. Search your product by entering the part number in

the ‘Search by Product’ search bar. Results for

applicable part numbers will populate automatically

based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

Template Sheet

Protective sheet

DW® Universal HD over Coax®

ultra low-proﬁle vandal dome cameras

Quick Start Guide

1. The camera supports HD-Analog, HD-CVI and HD-TVI signals. To

switch between the signals:

a. Remove the camera’s dome to access the joystick and OSD

control on the base of the camera.

b. Use the OSD Switch to switch the camera’s signal.

1. Once all cables have been connected, use the screws included

with the camera to properly mount and secure the camera to the

mounting surface.

2. Adjust the camera’s pan, tilt and position to achieve the desired

view. The cameras’ max angles are:

Pan: 0° ~ 360°

Tilt: 0° ~ 70°

Rotation: 0° ~ 360°

3. Once the installation is complete, remove the protective ﬁlm from

the camera’s dome cover.

STEP 4 – INSTALLING THE CAMERASTEP 3 – CHANGING THE SIGNAL IN

THE CAMERA

Rev Date: 09/19

Speciﬁcations and pricing are subject to change without notice.

Template

Sheet

1. Using the bolt and nut mounting template, mark and drill the

necessary holes in the mounting surface.

2. Pass wires through and make all connections (see STEP 2 for more

information).

3. Secure the two long mounting screws to the camera’s base.

4. Mount the camera to the mounting surface by using the 2

mounting nuts.

5. Rotate the locking discs over the screws until the camera is held

tightly from the mounting surface.

For a bolt and nut installation:

Rotation 360°

Titling 70°

Panning 360°

DOWN

- To switch the camera to

HD-TVI mode, press OSD

joystick to the left

for 5 seconds.

- To switch the camera to

HD-Analog mode, press OSD

joystick to the right

for 5 seconds.

- To switch the camera to CVBS

mode, press OSD joystick up

for 5 seconds.

- To switch the camera to

HD- CVI mode, press OSD

joystick down for 5 seconds.

Altri manuali per Star-Light DWC-V7253

Altri manuali Digital Watchdog Telecamera di sicurezza

Digital Watchdog

Digital Watchdog Star-Light 960H DWC-B6563DIR Manuale utente

Digital Watchdog

Digital Watchdog DWC-V7253TIR Manuale utente

Digital Watchdog

Digital Watchdog DWC-D2252DIR Manuale utente

Digital Watchdog

Digital Watchdog DWC-V4CMW Manuale utente

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PVF5M1TIRC6 Manuale utente

Digital Watchdog

Digital Watchdog Star-Light Plus HD over Coax... Manuale utente

Digital Watchdog

Digital Watchdog PTZ37X Manuale utente

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MT95WW28TW Manuale utente

Digital Watchdog

Digital Watchdog D1362D Series Manuale utente

Digital Watchdog

Digital Watchdog MEGApix DWC-MD72Di28T Manuale utente

Digital Watchdog

Digital Watchdog DWC-B1365T Manuale utente

Digital Watchdog

Digital Watchdog DWC-V4567WD Manuale utente

Digital Watchdog

Digital Watchdog PTZ37XFM Manuale utente

Digital Watchdog

Digital Watchdog MEGApix Ai DWC-PDS10Wi28A Manuale utente

Digital Watchdog

Digital Watchdog DWC-PTZ10x Manuale utente

Digital Watchdog

Digital Watchdog DWC-TT4Wi36 Manuale utente

Digital Watchdog

Digital Watchdog MEGApix Ai ANPR Manuale utente

Digital Watchdog

Digital Watchdog MEGApix DWC-MF5Wi4TW Manuale utente

Digital Watchdog

Digital Watchdog DWC-BL2553DIR Manuale utente

Digital Watchdog

Digital Watchdog Star-Light Plus Universal HD over Coax... Manuale utente

Digital Watchdog

Digital Watchdog MEGApix DWC-MV74Wi28 Manuale utente

Digital Watchdog

Digital Watchdog Star-light Plus DWC-B6883WTIR Manuale utente

Digital Watchdog

Digital Watchdog MEGApix PANO DWC-PVF9M2TIR Manuale utente

Digital Watchdog

Digital Watchdog DWC-V1312XW Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente