Digitus professional DS-23200-2 Manuale utente
8 ports/16 ports
USB/PS/2 Combo-KVM Switch
Manual
DS-23200-2 • DS-23300-2
PRODUCT MODEL LIST
Model Specification
DS-23200-2 8 input (USB & PS/2), 1 output (USB), Supporting cascade
& hub.
DS-23300-2 16 input (USB & PS/2), 1 output (USB), Supporting
cascade & hub.
Please check to make sure that all the components are present and that nothing
was damaged in shipping. If you encounter a problem, contact your dealer.
Read this manual thoroughly and follow the installation and operation procedure
carefully to prevent any damage to the unit, and/or any of the devices that
connect to it.
PRODUCT MODEL LIST ..........................................................................................2
PACKING LIST.........................................................................................................3
OVERVIEW.............................................................................................................3
FEATURES ..............................................................................................................4
HARDWARE REQUIREMENT ..................................................................................4
Operation System.........................................................................................5
INTRODUCTION.....................................................................................................7
Front View ....................................................................................................7
Rear View .....................................................................................................8
INSTALLATION........................................................................................................9
Single KVM device installation .....................................................................9
Cascade device connection ........................................................................11
OPERATION ......................................................................................................... 12
OSD OPERATION..................................................................................................13
TROUBLESHOOTING ............................................................................................22
SPECIFICATION ....................................................................................................22
SAFE GUIDE: ........................................................................................................24
OVERVIEW
8 ports/16 ports USB/PS/2 KVM (Keyboard, Video, Mouse) Switches are control units
that allow access and control of up to 8 (DS-23200-2) or 16 (DS-23300-2) computers
from a single USB/keyboard, USB/mouse, and monitor console.
There are two convenient methods to access any computer connected to the
installation: (1) using the push button port selection switches located on each unit’s
front panel; (2) selecting from menus provided by the On Screen Display (OSD).
Setup is fast and easy: simply plug cables into their appropriate ports. There is no
software to configure, and no incompatible problems. It works on multiple operating
platforms (PC compatible, Sun, etc.).
There is no better way to save time and money than with a DS-23200-2/DS-23300-2
Installation: Since a single console manages all of the computers, the
DS-23200-2/DS-23300-2 setup (1) eliminates the expense of having to purchase a
separate keyboard, monitor, and mouse for each computer; (2) saves all the space
those extra components would take up; (3) saves on energy costs; (4) eliminates the
inconvenience and wasted effort involved in constantly moving from one computer to
another.
PACKING LIST
The complete 8 ports/16 ports USB/PS/2 KVM switch package consists of:
8 ports/16 ports USB/PS/2 KVM switch
Power Adapter
User Manual
FEATURES
One console controls 8 or 16 computers
Be compatible with USB/keyboard and mouse in console and PS/2, USB
keyboard and mouse in computer
Computer selection via front panel switches and OSD
LEDs display for easy status monitoring
Auto Scan Mode for monitoring all computers
Superior video quality
Easy installation – no software required
Hot pluggable – add or remove computers for maintenance without powering
down the switch
Support Windows, Solaris etc.
HARDWARE REQUIREMENT
CONSOLE
A VGA, SVGA monitor capable of the highest resolution that you will be using
on any computer in the installation
A USB/mouse
A USB/keyboard
COMPUTER
The following equipment must be installed on each computer:
A VGA, SVGA card
PS/2, USB keyboard and mouse ports
OPERATION SYSTEM
Operation System Version
Windows Windows 2000/XP/2003/2008/Vista/7/10
Linux RedHat 9.0 or higher
SuSE 10/11.1 or higher
Debian 3.1/4.0
Ubuntu 7.04/7.10
UNIX AIX 4.3 or higher
FreeBSD 5.5 or higher
Sun Solaris 8 or higher
Mac OS 9.0~10.6 (Snow Leopard)
Novell Netware 6.0 or higher
More operating system support, please pay attention to the latest version of the
relevant product compatibility.
CABLE
Only customized KVM cable sets, which are specially designed to work with these
switched, may be used. To purchase DIGITUS KVM cable sets, contact your dealer.
VGA+ USB (Type A)+ PS/2 Keyboard (Purple) +PS/2 Mouse (Green)
INTRODUCTION
Front View
8 ports selection switches
16 ports selection switches
1&2 3
No. Section Function
1 Port Selection
Switches
Press a switch button to access the computer attached to its
corresponding port. The internal buzzer beeps, it means that
the switching action is performed correctly, The selected port
LED will light up as well.
2 Port LEDs The port LEDs are built into the Port Selection Switches. The
upper ones are the On Line LEDs; the lower ones are the
Selected Port LEDs:
The On Line LEDs light RED to indicate that the computer
attached to the corresponding port is up and running.
The Selected LEDs light GREEN to indicate that the
computer that attached to the corresponding port is the
one that has the KVM focus.
3 Reset If KVM has no responding, plug needle or ballpoint pen into
the hole to reset KVM
Rear View
8 port KVM rear view
5 3 4
16 port rear view
6 2 1
No. Section Function
1 KVM
Connection
Port
Port to connect computer. Connect one end of the VGA
connector of the corresponding KVM cable to this, and the
other end of the keyboard connector to the port
corresponding to the PC. (Refer to the description of
"Cable" in the relevant section.)
2 VGA port Connect the VGA cable from the control panel to this port.
3 USB Keyboard,
Mouse port
Plug your USB keyboard, USB mouse. USB Type A
(Optional)
4 PS/2 Keyboard,
Mouse port
Plug your PS/2 keyboard, PS/2 mouse (Optional)
5 IP Remote
Control Part
To provide users with remote network control. (Refer to
the instruction manual of the module product for specific
operation.) (Optional)
6 Supply hub Plug the power adapter here.
If you purchase the product does not contain IP expansion module is similar to the
product shown below.
DS-51000-1 No IP Module Rear View
The part marked with “DS-55100-1” is the external baffle of the extended IP module,
and it needs to be removed and replaced to install the IP module.
INSTALLATION
Single KVM device installation
Note: Before installation, make sure that the equipment is powered off. To prevent
damage to the equipment during installation, make sure that all the devices installed
are well grounded.
To install a single-level KVM, refer to the following online diagrams (numbered in the
order of steps on the online graph) and operate as per bellowing:
1. Plug your USB keyboard, mouse, or PS/2 keyboard and mouse into the USB or
PS/2 console port on the rear of the switch.
2. Connect the VGA monitor's video signal cable to the VGA console port and turn
on the power.
3. Plug the VGA connector into the VGA port of any available VGA port on the
switch by using a set of KVM cables corresponding to the product model.
4. Connect the corresponding VGA video connector, USB or PS/2 connector of the
KVM cable to the corresponding PC port.
5. Plug the power adapter supplied with this package into the AC power supply,
and plugs the other end of the power adapter into the power jack on the
switch.
6. Connect the network cable to the IP port of the IP module. (Optional)
7. Turn on the computer.
Note:
1. Make sure all plugs are connected to the same set of KVM port jacks (all on port 1,
or all on port 2).
2. The IP module is an optional module of the product. If the product you purchased
does not contain the module, please ignore the related operation in Step 6.
3. Before using the IP module, please make the corresponding configuration and
network debugging, and then connect to the network you want to connect.
Otherwise, the IP module may not be able to control normally because of the
connection failure. (Refer to the manual of the IP module product manual for how
to use and debug the IP module.)
USB OR PS2
Net
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Digitus professional Interruttore
Digitus professional
Digitus professional DN-651107 Manuale utente
Digitus professional
Digitus professional DN-80065 Manuale utente
Digitus professional
Digitus professional DN-80111 Manuale utente
Digitus professional
Digitus professional DS-72210 Manuale utente
Digitus professional
Digitus professional DN-65 Series Manuale utente
Digitus professional
Digitus professional DN-95115 Manuale utente
Digitus professional
Digitus professional DN-95342 Manuale utente
Digitus professional
Digitus professional DN-80114 Manuale utente
Digitus professional
Digitus professional DN-651108 Manuale utente
