Digitus DN-60021-1 Manuale utente
24-Port 10/100Mbps
Ethernet Switch
Manual
DN-60021-1
Description
DN-60021-1 is 24-port 10/100Mbps unmanaged Ethernet Switch. Adopt professional
IP1725 switch chips, the switch provides 24 x 10/100Mbps Auto-Negotiation RJ45
ports. All RJ45 ports support the Auto-MDI/MDIX function. Every port can works as
uplink port or common port. The Switch delivers superior performance with improving
workgroup, network bandwidth, increasing network node, providing greater flexibility,
installation convenience. It is the best choice for increasing your speed.
Features
Complies with IEEE802.3, IEEE802.3u standards
24 x 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
Supports IEEE802.3x flow control for Full Duplex mode and backpressure for
half-duplex mode
Supports MAC address auto-learning and auto-aging
4.8 Gbps Switching Capacity
Store and forward Switching scheme
Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps
hardware.
LED indicators for monitoring power, link, activity
1U 19-inch rack-mountable matel case
Internal universal power supply
Chapter 1 Introduction
Congratulations on your purchase of this 10/100Mbps switch. Instructions for
installing and configuring this product can be found in this manual. Before you install
and use this product, please read this manual carefully for full exploiting the functions
of this product.
The 10/100Mbps switch is the perfect way of integrating 10Mbps Ethernet and
100Mbps Fast Ethernet devices. All 24-ports are auto speed negotiating, and have
automatic MDI/MDI-X crossover detection, so you don't have to worry about the cable
type. Each port independently negotiates for best speed and half- or full-duplex mode,
for up to 200Mbps of bandwidth per port. Fast store-and-forward switching prevents
damaged packets from being passed on into the network.
1.1 Features
Twenty four 10/100BASE-T Ethernet Ports
Support Auto-Negotiation for 10/100Mbps
Support Auto-MDI/MDIX for each port
Support Full/Half duplex transfer mode for 10/100Mbps
Complies with IEEE 802.3, IEEE 802.3u
Support Store-and-Forward switching method
Support Wire-speed and non-blocking performance
Support Address learning and aging
Support Broadcast Storm Filtering Control
Support Data Flow Control for enhanced transmission reliability
Support 8K MAC addresses
Standard 19’ Rack-mount size
1.2 Environments
Storage Temperature: -40ºC ~70ºC
Operating Temperature: 0ºC ~40ºC
Storage Humidity: 5% ~90% RH Non-condensing
Operating Humidity: 10% ~90% RH Non-condensing
1.3 Package
One 10/100Mbps switch
One Manual
One AC Power cord 24-Port 10/100Mbps Ethernet Switch 5
Chapter 2 Installation
2.1 Front Panel LEDs
Power LED
This red indicator illuminates when the Switch is receiving power.
Link/Act
This green indicator illuminates steadily when a port is connected to a station
successfully, If this green indicator is blinking, it indicates that a port is transmitting or
receiving data on the network.
2.2 Back Panel Features
The power connector is located on the back panel of the switch.
AC Power Connector
This is the three pronged connector that support the power cord. Plug in the female
connector of the provided power cord into this connector, and the male into a power
outlet. Supported input voltages range from 100~240V AC at 50~60Hz.
2.3 Connecting Network Devices
To connect network devices to the Switch, follow these instructions.
1. Make sure all the devices you will connect to the Switch are powered off.
2. Connect a Category 5 Ethernet network cable to one of the numbered ports on
the Switch.
3. Connect the other end to a PC or other network devices.
4. Repeat steps 2 and 3 to connect additional devices.
5. Plug in the female connector of the provided power cord into the power connector
on the Switch’s back panel.
6. Plug in the male into a power outlet.
7. Power on the devices connected to the Switch. Each active port’s corresponding
LED will light up on the Switch.
Specification
Model DN-60021-1
Chipset IP1725LF
Standards IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
Network Media (Cable)
10Base-T: UTP category 3, 4, 5 cable
(maximum 100m)
100Base-Tx: UTP category 5, 5e cable
(maximum 100m)
Number of Ports 24 x 10/100Mbps Auto-Negotiation ports
LED
indicators
10/100M Link/Act
Other Power
Transfer Method Store-and-Forward
Switching Capacity 4.8G
MAC address table 8K
MAC Address Learning Automatically learning, automatically Update
Frame Filtering and Forward
Rate
10Mbps: 14880pps,
100Mbps: 148800pps
Environment
Operating Temperature: 0℃~40℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage humidity: 5%~90% non-condensing
Power Supply/Consume Input: 100-240V～50-60Hz 0.6A
Consume: 6 W（MAX）
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Indice
Altri manuali Digitus Interruttore
Digitus
Digitus DC IC612I Manuale utente
Digitus
Digitus DN-80113 Manuale utente
Digitus
Digitus DN-651148 Manuale utente
Digitus
Digitus DN-651160 Manuale utente
Digitus
Digitus DN-95342-1 Manuale utente
Digitus
Digitus DN-95311 Manuale utente
Digitus
Digitus DS-12890 Manuale utente
Digitus
Digitus DN-95301 Manuale utente
Digitus
Digitus DC IC812I-MC Manuale utente
Digitus
Digitus DS-11402-1 Manuale utente
Digitus
Digitus DN-651146 Manuale utente
Digitus
Digitus DS-46100 Manuale utente
Digitus
Digitus DN-80063 Manuale utente
Digitus
Digitus DN-80063-1 Manuale utente
Digitus
Digitus DN-651109 Manuale utente
Digitus
Digitus DC-11201-1 Manuale utente
Digitus
Digitus DN-80120 Manuale utente
Digitus
Digitus DN-80119 Manuale utente
Digitus
Digitus DC-OC-12U Manuale utente
Digitus
Digitus DA-70244 Manuale utente
