Digitus DN-95359 Manuale utente

24 Port L2 Managed

Gigabit Ethernet PoE

Switch

Quick Installation Guide

DN-95359

1. Introduction

The DN-95359 is a manageable 24 +2 port PoE switch with L2 features.

It is mainly used in the structural LAN area. With a total PoE power

budget of 430 watts, the DN-95359 supplies up to 24 connected PoE

devices such as IP security cameras or VoIP telephones with up to 30

watts per port. Due to the large backplane bandwidth of 52 Gbps, data

can be processed and forwarded quickly. Furthermore, features

such as ICMPv6, IGMP & MLD snooping, port mirroring, broadcast

storm filter and many more are supported.

2. Features

1. Provides 24 10/100/1000 Base-TX ports + 2 gigabit SFP ports,

Provides 24 PoE injector.

2. Build-in power supplies, 450W, High back-plane bandwidth

52Gbps.

3. Support ICMPv6, IPv6 Neighbor Discovery,MLD Snooping, IPv6.

Telnet, standard IP/ Extend IP / MAC IP / ARP ACL, IGMP snooping

for multi-media application.

4. Support Port mirror and bandwidth control, IEEE802.3x Flow

control.

5. Support Port Based VLAN / 802.1Q Tag VLAN, IEEE802.3ad Port.

Trunk with LACP.

6. Support Spanning tree protocol IEEE802.1d/802.1w/802.1s.

7. Support IEEE 802.1p class of service, IEEE 802.1x user

authentication.

8. Support Broadcast storm filter, System event log, command line

interface management.

9. Management by Web / SNMP / SSH / Telnet (IPv6 ready) /

Console.

3. Package Contents

1 x DN-95359 24 Port PoE Switch

1 x User Manual

1 x Power Cord

1 x DB9 to RJ45 Cable

1 x Rack Mount Kit

4 x Rubber Feet

4. Specification

Networking Interfaces

24 x 10/100/1000 Mbps RJ45 Ethernet

Ports

2 x 1 Gbps SFP Ethernet Ports

Management Interface

Console

LED Indicators

Power, Link/Act, PoE

Performance

Switching Capacity

52 Gbps

Forwarding Capacity

38.7 Mpps

Forwarding Mode

Store and Forward

Packet Buffer Memory

4.1 Mbit

RAM for CPU

1 Gbit

Flash Memory

128 Mbit

MAC Address Table

Max. Jumbo Frame size

16K

VLAN Quantity

ACL Table

512

L3 Interface

Port Queues

PoE Budget

430W

Physical

Dimensions

440 x 200 x 44 mm

Operating Temperature

0 to 40℃

Storage Temperature

-10 to 70℃

Operating Humidity

5 to 95% Noncondensing

Power Method

100-240VAC, 50/60Hz

Max. Power

Consumption

Including PoE Output: 450W

Excluding PoE Output: 20W

Power over Ethernet

PoE Interfaces

Ports 1-24

PoE Standard

IEEE802.3af, IEEE802.3at

Max. PoE Wattage per

Port

30W

PoE Voltage

52VDC

PoE Pin Assignment

V- (RJ45 Pin1,2), V+ (RJ45 Pin 3,6)

PoE Management

Port-base PoE status view and control,

PoE Schedule, PD Alive Auto Check

Port Configuration

Enable and Disable

Support control enable and disable

Auto-Negotiation

Support force port mode and speed

Flow Control

Support IEEE802.3x full-duplex

Support half-duplex backpressure

Storm Control

Support broadcast, multicast and DLF

package rate limit

Port Mirroring

Support many to one mirroring

Rate Limit

Support Port input and output rate

limit

Link Aggregation

Support manual Link Aggregation

Support LACP

Up to 8 maximum aggregation groups,

each containing up to 8 ports

Aggregation Strategy

Source MAC / Destination MAC /

Source Destination MAC

Source IP / Destination IP / Source

Destination IP

Port Protection

Each port can be configured into

isolated protected port from each

other

MAC Configuration

MAC Address Table

Management

Support

Transfer Mode

Support IVL transfer mode

Static MAC Address

Support

MAC Binding

Support

MAC Address Filter

Support

MAC Quantity Limitation

Support limit the number of MAC-

addresses Learning per port

VLAN Configuration

VLAN Based on 802.1Q

Support

MAC-Based VLAN

Support

IP-Based VLAN

Support

Protocol-Based VLAN

Support

Voice VLAN

Support

Guest VLAN

Support

Private VLAN

Support

VLAN Mapping

Support 1:1 mapping

Double VLAN Markup

Support basic QinQ

Reliability Protocol

Spanning Tree

Support STP/RSTP/MSTP

BPDU Guard

Support

BPDU Filter

Support

Port Loop Detection

Support

EAPS Protocol

Support RFC3619

ERPS Protocol

Support G.8032/Y.1344

LLDP Protocol

Support LLDP and LLDP-MED

UDLD Protocol

Totally compatible with UDLD protocol

of CISCO

Host Routing

Static ARP

Support

Static Routing

Support

Multicast

Static Multicast MAC

Address

Support

IGMP SNOOPING

Support

MVR

Support

GMRP

Support

Access Control List (ACL)

Based on Standard IP

Support

Based on Extend IP

Support

Based on MAC IP

Support

Based on MAC ARP

Support

Based on time

Support

Port Filtering

Support

Quality of Service (QOS)

Scheduling Mode

Support WRR, SP, WFQ

Sorting Based on Port

Support

Sorting Based on 802.1p

Support

Sorting Based on DSCP

(DiffServ)

Support

Sorting Based on ACL

Data Flow

Support

QoS Strategy

Support packet mapped to the

corresponding output queue

Support to modify the packet’s COS

and DSCP sign

Support limit of data flow

Support statistics of data flow

Support mirroring of data flow

Security

Administrative Security

Support start and end TELNET, WEB

and SNMP serve

Support TELNET, WEB and SNMP serve

binding with Standard IP ACL

Support control the number of user

for TELNET

CPU Protect

Switch self-security protect, forbid

flow attack

IP-MAC Address Binding

Support binding between static

configuration IP, MAC and Port

AAA

Support 802.1x protocol

Support RADIUS protocol

Support RADIUS server authentication

authorization and bill

Support MAC-based 802.1X

authentication.

Support 802.1x guest VLAN

DHCP SNOOPING

Support dynamic ARP binding to

prevent ARP spoofing

Support dynamic IP, MAC port binding

Support stationary port connect to

DHCP server, to prevent privately

connect to DHCP sever

Prevent ARP Spoofing

Support manual configure ACL rule

based on MAC ARP prevent ARP

spoofing

Support DHCP SNOOPING function,

switch dynamically binding ARP and

port, when the DHCP get IP address ,

to prevent ARP spoofing

IPv6

ICMPv6

Support

IPv6 Neighbor Discovery

Support

MLD Snooping

Support

IPv6 Telnet

Support

Management Feature

CLI Management

Support serial port management

Support TELNET management

Support SSH management

WEB Management

Support

SNMP Management

Support SNMP protocol

Support SNMP TRAP

Support standard and private MIB

User management

Support multi-user management

Show CPU Utilization

Support

Show RAM Utilization

Support

TACACS+

Support TACACS+ server remote user

name and password authentication

Support PAP and CHAP password

encryption

Support TACACS+ server command

authorization

Log Management

Support

RMON

Support RMON 1,2,3,9 group

Cluster Management

Support neighbor discovery protocol

Support topology discovery protocol

Support manual and automated join

cluster group

Support cluster unification

management

OAM

Support 802.3ah

Support 802.1ag

DHCP Client

Support

Configuration Download

/ Upload

Support

Upgrade Firmware

Support

Timer Management

Support local timer management

Support SNTP protocol get clock

Debugging Tools

PING

Support

TRACEROUTE

Support

TELNET Client

Support

5. Panel infomation

Front panel

PWR LED：The Power LED lights up when the Switch is connected to a

power source.

Link/Act LED: The Link/Act LED flashes which indicates a network link

through the corresponding port. Blinking indicates that the Switch is

either sending or receiving data to the port.

PoE LED:

Green: Indicates the PoE powered device (PD) is connected and the

port supplies power successfully.

Light off: Indicates no powered device (PD) connected.

Real panel

Power input: Supports input voltages 100-240VAC, 50/60Hz.

Switch: turn on the switch after inserting the power cord, “I” means to

turn on, “O” means closing.

Grounding: use specialized ground lead connect

6. Hardware installation

This chapter provides unpacking and installation information for the

switch.

6.1 Switch installation

For safe switch installation and operation, it is recommended that

you:

Visually inspect the power cord to see that it is secured fully to

the AC power connector.

Make sure that there is proper heat dissipation and adequate

ventilation around the switch.

Do not place heavy objects on the switch.

Indice

Altri manuali Digitus Interruttore

Digitus

Digitus DC OC-12 Manuale utente

Digitus

Digitus DA-70242-1 Manuale utente

Digitus

Digitus DC-OC-12U Manuale utente

Digitus

Digitus DS-46100 Manuale utente

Digitus

Digitus DN-651148 Manuale utente

Digitus

Digitus DN-95358 Manuale utente

Digitus

Digitus DN-80119 Manuale utente

Digitus

Digitus DN-50012-1 Manuale utente

Digitus

Digitus DA-73300 Manuale utente

Digitus

Digitus DS-14210 Manuale utente

Digitus

Digitus DS-12860 Manuale utente

Digitus

Digitus DN-651113 Manuale utente

Digitus

Digitus DN-650105 Manuale utente

Digitus

Digitus DA-73300-1 Manuale utente

Digitus

Digitus DA-70241 Manuale utente

Digitus

Digitus DN-651138 Manuale utente

Digitus

Digitus DN-650107 Manuale utente

Digitus

Digitus DA-70253 Manuale utente

Digitus

Digitus DS-12880 Manuale utente

Digitus

Digitus DA-70247 Manuale utente

Digitus

Digitus DA-70246 Manuale utente

Digitus

Digitus DN-95355 Manuale utente

Digitus

Digitus DN-80063-1 Manuale utente

Digitus

Digitus 16 PORT GIGABIT ETHERNET NETWORK SWITCH Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente