4
AboutYourdimchae0 StandingQ)
A Warning
USEAWALLOUTLETCONNECTEDTOA
CIRCUITBREAKER,ORMAKESURETHAT
THEAPPLIANCEISADEQUATELY
GROUNDED.
Connect your appliance to a wall outlet connected
to a circuit breaker or with a ground terminal.
Alternatively, purchase a grounding wire, connect
with a grounding terminal on the wall socket or
a copper plate, and bury it in the ground.
Grounding to agas pipe, a plastic water pipe or a
telephone cable is not permitted under any
circumstances.
DONOTINSERTTHEMETALSTICKOR
YOURHANDSINTOTHEMACHINEROOM
COVERONTHETOPORINTOTHEBOTTOM
AREAUNDERTHEAPPLIANCE.
• This may cause electrical shock or injury.
WHENYOUINSTALLTHEAPPLIANCE,
ADJUSTTHELEVELWITHTHE
HEIGHT-ADJUSTINGSCREWSSOTHAT
ITDOESNOTFALLFORWARD.
• Ifyou install the appliance on a flat floor, it will be
installed with the front side approximately 10 mm
higher than the rear side.
• Ifyou install the appliance on an uneven floor,
it may lean toward the front. In this case, adjust the
front side to be higher than the rear side using the
height-adjusting screws.
