6SA Series Users Manual . Release 01 . English
Gearboxes - Hoists - Winches - Construction Attachments
READ MANUAL PRIOR TO INSTALLATION
Improper installation, operation, or maintenance of
this equipment could result in serious injury or death.
Operators and maintenance personnel should read this
manual,as well as all manuals related to this equipment
and the prime mover thoroughly before beginning
installation, operation, or maintenance.
READ AND UNDERSTAND ALL SAFETY
STATEMENTS
Read all safety decals and safety statements in all
manuals prior to operating or working on this equipment.
Know and obey all regulations, local laws, and other
professional guidelines for your operation.
Know and follow good work practices when assembling,
maintaining, repairing, mounting, removing, or operating
this equipment.
KNOW YOUR EQUIPMENT
Know your equipment’s capabilities, dimensions, and
operations before operating.
Visually inspect your equipment before you start, and
never operate equipment that Is not in proper working
order with all safety devices intact.
Check all hardware to ensure it is tight. Make certain that
all locking pins, latches, and connection devices
are properly installed and secured.
Remove and replace any damaged, fatigued, or
excessively worn parts.
Make certain all safety decals are in place and are
legible.
Keep decals clean, and replace them if they become
worn or hard to read.
PRIME MOVER LIFT CAPACITY
Alert yourself to the weight of the Drive attachment. DO
NOT exceed the recommended lift capacity of the prime
mover. Refer to your prime mover’s owners manual for
suggested lift capacity and lift considerations.
NOTICE
DO NOT MODIFY EQUIPMENT / PRODUCT
Modications may weaken the integrity of the attachment
and may impair the function,safety, life, and performance
of the attachment.
When making repairs, use only the manufacturer’s
genuine parts, following authorized instructions. Other
parts may be substandard in t and quality.
Never modify any ROPS (Roll Over Protective Structure)
or FOPS (Falling Object Protective Structure) equipment
or device. Any modications must be authorized in
writing by the manufacturer.
RAISED EQUIPMENT CAUTION
DO NOT work under raised booms without supporting
them.
Never place any body part between the prime mover
chassis and the attachment.
Do not use support materials made of concrete blocks,
logs, buckets, barrels, or any other material that could
suddenly collapse or shift positions. Make sure support
material is solid, not decayed,warped, twisted, or tapered.
Lower booms and attachments to the ground before
leaving the cab or operator’s station.
Whenever the boom structure must be raised for
attachment installation or servicing ensure the boom
locking devices (if equipped) are deployed to prevent the
accidental lowering of boom structures.
CALIFORNIA PROPOSITION 65 WARNING
This product may contain a chemical known to the
state of California to cause cancer, or birth defects or
other reproductive harm. www.P65Warnings.ca.gov
For Customers in California, pursuant to California Health
and Safety Code Section 25249.5 et seq., commonly
referred to as Proposition 65 (“Prop 65”), DONA hereby
noties Buyer that the Goods sold contain shale oils,
mineral oils, and tetrachloroethylene, which are known to
the State of California to cause cancer.
WARNING
WARNING
