Please read the following instructions carefully.
1. Keep the equipment away from humidity.
2. Before you connect the equipment to the power outlet, please
check the voltage of the power source.
3. Make sure the printer is off before plugging the power connector
into the power jack.
4. It is recommended that you connect the printer to a surge
protector to prevent possible transient overvoltage damage.
5. Be careful not to get liquid on the equipment to avoid electrical
shock.
6. For safety and warranty reasons, ONLY qualified service personnel
should open the equipment.
7. Do not repair or adjust energized equipment under any
circumstances.
SAFETY INSTRUCTIONS
TMP-002
Thermal Transfer
Printer
* Danger of explosion if battery is incorrectly replaced. Replace only with the equivalent
type recommended by the manufacturer.
** Only use with designated power supply adapter model.
Specifications are subject to change without notice.
Caution
