Go to table of contents
DCS_Direct_Jet_1024UVMVP
_Getting_Started_Guide_1.2_030314
6 | P a g e
Safet and Precautions
•Please read these guidelines before operating your Direct Jet printer.
•Keep all inks, solvents and lubricants out of the reach of children.
•Use only approved cleaning agents and solvents and then only for the purposes specified in
this guide.
•Use only genuine Multisolve™ UV-LED inks.
•Keep inks in a cool, dark and dry location.
•Inks ust be used in opaque containers only.
•This printer produces potentially har ful UV light. Protect eyes and skin fro exposure.
•Avoid physical contact with the printer's table and print head while the printer is in
operation.
•Avoid dropping ite s or spilling liquids in or on the printer.
•Keep hair, jewelry or loose clothing away fro the oving parts of the printer.
•Lifting this printer by hand requires a ini u of two people.
•Do not atte pt to repair this achine without prior DCS authorization. Unless specified in
this guide, only qualified service personnel should atte pt any disasse bly, repair or access
to internal co ponents. If you need to ake echanical adjust ents, turn off your printer
and disconnect it fro all power and data sources.
•Safety Glasses and gloves should be used whenever filling or draining ink
tanks, or anually cleaning the print head. These sy bols will be used
throughout this anual as a re inder to use safety glasses and gloves.
Wear protective gear whenever there is exposure to the inks, regardless
of whether a sy bol is displayed.
For prolonged exposure, DCS reco ends Butyl Black or Ethylene Vinyl
Alcohol Copoly er la inated gloves.
•The Adhesion Pro oter should not be used in an enclosed area without adequate
ventilation. RESPIRATORY PROTECTION: If exposure can exceed the PEL/TLV,
use only NIOSH/MSHA approved air-purifying or supplied air respirator
operated in a positive pressure ode per the NIOSH/OSHA 1981 occupational
health guidelines for che ical hazards.
