Directed Electronics Clifford G5 Manuale utente

The Science of Security

™

CClliiffffoorrddRReessppoonnddeerrCCoommppaanniioonnRReemmoottee

PN 472X

Compatible with the

following systems:

RRSS33

RRSS11..55

RRSS33..55

22..55XX

Note: The RS3 requires alter-

nate programming.

1. Open a door. (The GREEN wire, H1/5, or theVIOLET, H1/7

must be connected.)

2. Key. Turn the ignition on. (The heavy gauge PINK wire of

the relay satellite must be connected.)

3. Select the receiver channel. Press and release the

Valet®/Program switch the number of times necessary to

access the desired channel. Once you have selected a chan-

nel, press and HOLD the Valet®/Program switch once more.

The siren will chirp and the LED will blink the number of times

corresponding to the channel that has been accessed.

NOTE:

Alternate programming is required for RS3.Consult the

RS3 Owner’s or Installation Guide for details.

Channel No. Function

1 Auto Learn Standard Configuration (default)

2 Arm only

3 Disarm only

4 Silent Mode™/Remote Valet®/Trunk Release

5 Remote Start

6 Channel 4

7 Channel 5

8 Short Run/Turbo

9 Timer Mode

10 Arm/Disarm/Panic

11 Panic Only

12 Delete all transmitters

Channels Two, Three and Eleven: Channels Two through

Eleven are used to assign the arm, disarm and panic functions

to separate buttons on the remote control.Teaching a button to

Channel Two erases all information about that remote from

memory.Any auxiliary functions that are desired will have to be

reprogrammed.Similarly, if the remote is set up to use the sep-

arate arm, disarm and panic channels and a button from that

remote is entered into Channel Two, the remote will be erased

from memory, and the system will only recognize the button

that was entered into Channel Two.

ChannelTwelve: If any transmitter button from a known trans-

mitter is programmed to ChannelTwelve, all transmitters will be

erased from memory and will revert to the default feature set-

tings.(See Features Menu section of this guide.) This is useful

in cases when one of the customer's transmitters is lost or

stolen. This will erase any lost or stolen transmitters from the

system's memory. It can also be used to start from scratch if

the transmitter buttons were programmed incorrectly.

4. Press the transmitter button. While HOLDING the

Valet®/Program switch, press the button from the transmitter

that you wish to assign to that channel.The unit will chirp indi-

cating successful programming. It is not possible to teach a

transmitter button to the system more than once.

5. Release. Once the code is learned, the Valet®/Program

button can be released.You can advance from one channel to

another by releasing the Valet® /Program button and tapping it

to advance channels and then HOLDING it. For example, if

you want to program Channel Three after programming

Channel One, release the Valet®/Program button. Press it

twice and release it to advance to Channel Three. Then press

it once more and HOLD it. The siren will chirp three times to

confirm it is ready to receive the code from the transmitter.

Learn Routine™ will be exited if:

Ignition is turned off.

Door is closed.

Valet®/Program button is pressed too many times.

More than 15 seconds elapses between steps.

One long chirp indicates that Learn Routine™ has been exited.

This device complies with Part 15 of FCC rules.

Operation is subject to the following conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference

received, including interference that may cause

undesired operation. Changes or modifications not

expressly approved by the party responsible for

compliance could void the user's authority to

operate this device.

MADE IN TAIWAN

P/N 472X 6/03

CClliiffffoorrddRReessppoonnddeerrCCoommppaanniioonnRReemmoottee

PN 472X

To program your new transmitter:

Altri manuali Directed Electronics Allarme auto

Directed Electronics

Directed Electronics 650 ESP Manuale utente

Directed Electronics

Directed Electronics Viper 106V Manuale utente

Directed Electronics

Directed Electronics MERLIN 2000 Manuale utente

Directed Electronics

Directed Electronics G312R Guida rapida

Directed Electronics

Directed Electronics Python 323 Manuale utente

Directed Electronics

Directed Electronics 591XV Manuale utente

Directed Electronics

Directed Electronics 1090 Manuale utente

Directed Electronics

Directed Electronics Hornet 740T Manuale utente

Directed Electronics

Directed Electronics PYTHON N426P Manuale utente

Directed Electronics

Directed Electronics Python 880XP Manuale utente

Directed Electronics

Directed Electronics AM1 Manuale utente

Directed Electronics

Directed Electronics Clifford 2.2 Manuale utente

Directed Electronics

Directed Electronics Hornet 563T Manuale utente

Directed Electronics

Directed Electronics 3901T Manuale utente

Directed Electronics

Directed Electronics CLIFFORD 320.3X Manuale utente

Directed Electronics

Directed Electronics Concept 650 Manuale utente

Directed Electronics

Directed Electronics VIPER 3203 Manuale utente

Directed Electronics

Directed Electronics PYTHON 480XP Manuale utente

Directed Electronics

Directed Electronics VIPER 1000 Manuale utente

Directed Electronics

Directed Electronics 435 Manuale utente

Directed Electronics

Directed Electronics 625 Manuale utente

Directed Electronics

Directed Electronics Auto mate 552 Manuale utente

Directed Electronics

Directed Electronics Avital 3200 Manuale utente

Directed Electronics

Directed Electronics Avital 3300 Manuale utente

Manuali Allarme auto popolari di altre marche

Clifford

Clifford 3606X Manuale utente

Ultra Start

Ultra Start 2500M SERIES Manuale utente

Ultra Start

Ultra Start 650 Series Manuale utente

Audiovox

Audiovox Prestige Platinum+ APS-511C Manuale utente

Sparkrite

Sparkrite SRA8 Manuale utente

Viper

Viper 4708V Manuale utente

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manuale

Falcon

Falcon Predator XL3 Guida utente

Audiovox

Audiovox Auto Security XR91 Istruzioni operative

Clifford

Clifford Sabre II Manuale utente

CrimeStopper

CrimeStopper CS-8717 Guida rapida

Ultra Start

Ultra Start 450 SERIES Manuale utente

Scytek electronic

Scytek electronic Vectra X3 Manuale utente

Excalibur

Excalibur AL-1860-EDPB Manuale utente

Clifford

Clifford CYBER 2 Manuale utente

Gemini

Gemini 7057 Manuale utente

FlashLogic

FlashLogic FLRSBA PRESTIGE Manuale utente

Magicar

Magicar FAI-440 Manuale utente