Directed Electronics AVITAL 4603 Manuale utente

Model 4603

Remote Start

Owner’s Guide

G4603LX 2009-09

Contents

Government Regulations ....................................................................................ii

Warning! Safety first ........................................................................................ iii

What is Included ............................................................................................1

Important Information ........................................................................................1

System Maintenance .................................................................................1

Your Warranty..........................................................................................1

Remote Control Functions ...................................................................................2

Using Your System ...........................................................................................3

Locking....................................................................................................3

Unlocking ................................................................................................3

Disabling (optional) Starter Kill ..................................................................3

Panic Mode .............................................................................................4

Remote Start.............................................................................................4

Rear Defogger..........................................................................................5

Valet Take-Over ........................................................................................6

Car Finder ...............................................................................................7

Timer Mode .............................................................................................7

Starter Anti-Grind Circuitry.........................................................................8

Disabling the Remote Start system ...............................................................8

Ignition Controlled Door Locks....................................................................9

Rapid Resume Logic ........................................................................................10

Owner Recognition .........................................................................................10

Programming Options......................................................................................11

Glossary of Terms............................................................................................12

Convenience Expansions .................................................................................13

Quick Reference Guide....................................................................................15

Limited Consumer Warranty .............................................................................17

Notes ............................................................................................................19

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television, which can be determined by

turning the equipment OFF and ON, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for

help.

Remote Controls

To satisfy FCC RF exposure compliance requirements, this device should be used

in hand-held, hand operated conﬁgurations only. The device and its antenna

must maintain a separation distance of 20 cm or more from the person’s body,

except for the hand and wrists, to satisfy RF exposure compliance. This device

is designed to be used in a person’s hands and its operating conﬁgurations do

not support normal transmissions while it is carried in pockets or holsters next to

a person’s body.

iii

Control Center

To satisfy FCC RF exposure compliance requirements, the device and its antenna

must maintain a separation distance of 20 cm or more from the person’s body,

except for the hand and wrists, to satisfy RF exposure compliance.

This device complies with the Industry Canada Radio Standards Speciﬁcation

RSS 210. Its use is authorized only on a no-interference, no-protection basis; in

other words, this device must not be used if it is determined that it causes harm-

ful interference to services authorized by IC. In addition, the user of this device

must accept any radio interference that may be received, even if this interference

could affect the operation of the device.

Warning:

Changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate this device.

Warning! Safety ﬁrst

The following safety warnings must be observed at all times:

Due to the complexity of this system, installation of this product must only be

performed by an authorized Directed dealer.

When properly installed, this system can start the vehicle via a command signal

from the remote control. Therefore, never operate the system in an enclosed area

or partially enclosed area without ventilation (such as a garage). When parking

in an enclosed or partially enclosed area or when having the vehicle serviced,

the remote start system must be disabled using the installed toggle switch. It is the

user’s sole responsibility to properly handle and keep out of reach from children

all remote control devices to assure that the system does not unintentionally re-

mote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE DE-

TECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL

DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR

PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN

CLOSED. These precautions are the sole responsibility of the user.

Use of this product in a manner contrary to its intended mode of operation may

result in property damage, personal injury, or death. (1) Never remotely start the

vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with

the keys in the ignition. The user must also have the neutral safety feature of the

vehicle periodically checked, wherein the vehicle must not remotely start while

the car is in gear. This testing should be performed by an authorized Directed

dealer in accordance with the Safety Check outlined in the product installation

guide. If the vehicle starts in gear, cease remote start operation immediately and

consult with the authorized Directed dealer to ﬁx the problem.

After the remote start module has been installed, contact your authorized dealer

to have him or her test the remote start module by performing the Safety Check

outlined in the product installation guide. If the vehicle starts when performing

the Neutral Safety Shutdown Circuit test, the remote start unit has not been

properly installed. The remote start module must be removed or the installer must

properly reinstall the remote start system so that the vehicle does not start in gear.

All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN

GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERAT-

ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT

IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY

CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AU-

THORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED

REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR

PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected, automatic transmission ve-

hicles only. Use of this product in a standard transmission vehicle is

dangerous and contrary to the product's intended use.

What is Included

• The control module

• A Venom SST antenna

• One 4 - button remote control (P/N 7641L)

• A push-button Valet switch

• Your warranty card

• A shut-down toggle switch

Important Information

Congratulations on the purchase of your remote start keyless entry sys-

tem. This system has been designed to provide years of trouble free

operation. By carefully reading this Owner’s Guide prior to using your

system, you will maximize the use of this system and its features. Addi-

tional or replacement copies of this guide can be printed by accessing

the Directed Electronics internet website at

www.avital.com

➢System Maintenance

The system requires no speciﬁc maintenance. Your remote is powered

by two miniature 3V lithium CR2025 batteries that lasts approximately

one year under normal use. When the batteries weaken, the LED on the

remote will dim and operating range will be reduced.

➢Your Warranty

Your warranty card must be completely ﬁlled out and returned within

10 days of purchase. Your product warranty will not be honored if

your warranty card is not returned. Make sure that you receive the

warranty card from your dealer. You may also register online at

www.prodregister.com/directed.

Remote Control Functions

The receiver uses a computer-based learn routine to learn the remote

control buttons. The remote control buttons described in this manual

correspond to a Standard Conﬁguration.

Standard conﬁguration

Button Press Feature



Lock

Press for 1 second to Lock. Press and hold for 1. 5

seconds to lock and then activate Panic.



Unlock

Press one time to Unlock, or to turn Panic Off.



Auxiliary

Press and hold for less than one second before lock-

ing and unlocking to activate Silent Mode. Press

and hold for 1.5 second to activate optional trunk

release.

Remote start

Press one time to activate Remote Start.



Press these buttons to activate Timer mode.



Press these buttons to activate Car ﬁnder.



Press these buttons simultaneously to activate the op-

tional Rear Window Defogger during remote start.

Using Your System

➢Locking

Pressing



for one second locks the system. (if the door locks are con-

nected). The horn honks (if connected) and the parking lights ﬂash once

to conﬁrm locking of the system. The optional Failsafe®Starter Kill also

activates and prevents the vehicle’s starter from cranking.

➢Unlocking

Pressing



for one second unlocks the doors (if connected). The horn

honks twice (if connected) and the parking lights ﬂash twice to conﬁrm

unlocking of the system. The optional Failsafe Starter Kill is deactivat-

ed.

➢Disabling (optional) Starter Kill

If your remote control is lost or damaged, you can manually override

the starter kill. You must have the ignition key, and know where the Valet

button is located. Be sure to check with the installer for the location of

the Valet button.

To override the starter kill turn the ignition on, and then press and re-

lease the Valet button one time within 10 seconds. The vehicle should

start, if not you may not have waited too long to release the button: Turn

the ignition off and repeat the process.

Location of Valet button:

____________________

➢ Panic Mode

If you are threatened in or near your vehicle, you can attract attention

by triggering the system with your remote control. Press



for 1.5

seconds to enter Panic Mode. In Panic Mode, the horn will honk and

the parking lights will ﬂash for 30 seconds. To stop Panic Mode at

any time, press



on the remote control.

Note:

In order for Panic Mode to be effective, the vehicle’s horn (or

optional siren) and the vehicle's parking lights must be connected.

➢Remote Start

This feature allows you to remotely start and run your vehicle for a

programmable period of time. This makes it possible to warm up the

engine, as well as adjust the interior temperature of the vehicle with

the climate control system. If interior heating or cooling is desired, the

climate controls must be preset, and the fan blower must be set to the

desired level prior to remote starting the vehicle.

Important!

Never remotely start the vehicle with the vehicle

in gear, and never remotely start the vehicle with the key in the

ignition.

To remote start the vehicle:

• Press the button on the remote control 1 time and hold for 1

second.

• The parking lights ﬂash to conﬁrm that the vehicle is attempting to

start. (In gasoline vehicles, the engine starts 4 seconds after the

parking lights ﬂash. In diesel vehicles, the engine starts when the

WAIT-TO-START timer light goes out.)

• Once the vehicle has started, it will run for the pre-programmed

period of time (12, 24, or 60 minutes) or until a shutdown input

is triggered.

Indice

Altri manuali Directed Electronics Avviamento remoto

Directed Electronics

Directed Electronics Cyber 110XV Manuale utente

Directed Electronics

Directed Electronics AutoCommand 41027T Guida rapida

Directed Electronics

Directed Electronics 410 Manuale utente

Directed Electronics

Directed Electronics 474A Manuale utente

Directed Electronics

Directed Electronics Python G4203P Manuale utente

Directed Electronics

Directed Electronics SmartStart 5000-series Manuale utente

Directed Electronics

Directed Electronics SmartStart 5000-series Manuale utente

Directed Electronics

Directed Electronics 50.7X Manuale utente

Directed Electronics

Directed Electronics AS-1775 Manuale utente

Directed Electronics

Directed Electronics Python 1401 Manuale utente

Directed Electronics

Directed Electronics Valet 561T Manuale utente

Directed Electronics

Directed Electronics Smart start Manuale utente

Directed Electronics

Directed Electronics PS-4461TWE-FM Manuale utente

Directed Electronics

Directed Electronics 435 Manuale utente

Directed Electronics

Directed Electronics Automate 552 Manuale utente

Directed Electronics

Directed Electronics READY REMOTE 24927 Guida rapida

Directed Electronics

Directed Electronics BOA 165B Guida rapida

Directed Electronics

Directed Electronics Xpresskit CANMAX400 Manuale utente

Directed Electronics

Directed Electronics Clifford G4203X Manuale utente

Directed Electronics

Directed Electronics 5301 Manuale utente

Directed Electronics

Directed Electronics 4103 Series Manuale utente

Directed Electronics

Directed Electronics Avital 4113 Manuale utente

Directed Electronics

Directed Electronics CT-3271 Manuale utente

Directed Electronics

Directed Electronics AM6 Manuale utente

Manuali Avviamento remoto popolari di altre marche

AstroStart

AstroStart 803U Manuale utente

Durite

Durite 0-649-20 Manuale

EINHELL

EINHELL BT-PS 1000 Manuale

Linear

Linear ACCESS AK-21 Specifiche tecniche

Soundstream

Soundstream TARANTULA RS.2 Manuale utente

Jaycar Electronics

Jaycar Electronics MB3752 Manuale utente

Ultra Start

Ultra Start 72 Series Manuale utente

ADS

ADS FLASHLOGIC FLRSVW1 Manuale utente

Selecta

Selecta JS012 Manuale utente

Black Widow Security

Black Widow Security BW RAS 400 Manuale utente

Vector

Vector Power City DK080706 Supplemento

Code Alarm

Code Alarm CA-535 Manuale utente

Ozito

Ozito OJS-800 Manuale utente

Profi-Partner

Profi-Partner 46387 Manuale utente

EZ STARTER

EZ STARTER EZ-45 Manuale utente

Viper

Viper 4204 Manuale utente

Essex Electronics

Essex Electronics KE-1701 Manuale utente

EINHELL

EINHELL EGS 3600 Manuale