Directed Electronics PYTHON 413 Manuale utente

Model 413

Remote Start

Owner’s Guide

G4103P 2009-07

Contents

Government Regulations ....................................................................................ii

Warning! Safety first ........................................................................................iii

What is Included ............................................................................................1

Important Information ........................................................................................1

System Maintenance .................................................................................1

Your Warranty..........................................................................................1

Remote Control Functions ...................................................................................2

Standard Configuration .............................................................................2

Using Your System ...........................................................................................3

Locking....................................................................................................3

Unlocking ................................................................................................3

Disabling (optional) Starter Kill ..................................................................3

Panic Mode .............................................................................................4

Remote Start.............................................................................................4

Rear Defogger..........................................................................................5

Valet Take-Over ........................................................................................6

Timer Mode .............................................................................................7

Starter Anti-Grind Circuitry.........................................................................8

Disabling the Remote Start system ...............................................................8

Ignition Controlled Door Locks....................................................................9

Rapid Resume Logic ........................................................................................10

Owner Recognition .........................................................................................10

Programming Options......................................................................................11

Glossary of Terms............................................................................................12

Convenience Expansions .................................................................................13

Quick Reference Guide....................................................................................15

Limited Lifetime Consumer Warranty..................................................................17

Notes ............................................................................................................19

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television, which can be determined by

turning the equipment OFF and ON, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

This device complies with the Industry Canada Radio Standards Speciﬁcation

RSS 210. Its use is authorized only on a no-interference, no-protection basis; in

other words, this device must not be used if it is determined that it causes harm-

ful interference to services authorized by IC. In addition, the user of this device

must accept any radio interference that may be received, even if this interference

could affect the operation of the device.

Warning:

Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this device.

iii

Warning! Safety ﬁrst

The following safety warnings must be observed at all times:

Due to the complexity of this system, installation of this product must only be

performed by an authorized Directed dealer.

When properly installed, this system can start the vehicle via a command signal

from the remote control. Therefore, never operate the system in an enclosed area

or partially enclosed area without ventilation (such as a garage). When parking

in an enclosed or partially enclosed area or when having the vehicle serviced,

the remote start system must be disabled using the installed toggle switch. It is

the user’s sole responsibility to properly handle and keep out of reach from chil-

dren all remote control devices to assure that the system does not unintentionally

remote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE

DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE.

ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED

OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES

REMAIN CLOSED. These precautions are the sole responsibility of the user.

Use of this product in a manner contrary to its intended mode of operation may

result in property damage, personal injury, or death. (1) Never remotely start the

vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with

the keys in the ignition. The user must also have the neutral safety feature of the

vehicle periodically checked, wherein the vehicle must not remotely start while

the car is in gear. This testing should be performed by an authorized Directed

dealer in accordance with the Safety Check outlined in the product installation

guide. If the vehicle starts in gear, cease remote start operation immediately and

consult with the authorized Directed dealer to x the problem.

After the remote start module has been installed, contact your authorized dealer

to have him or her test the remote start module by performing the Safety Check

outlined in the product installation guide. If the vehicle starts when performing

the Neutral Safety Shutdown Circuit test, the remote start unit has not been

properly installed. The remote start module must be removed or the installer must

properly reinstall the remote start system so that the vehicle does not start in gear.

All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN

GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERAT-

ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT

IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY

CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AU-

THORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED

REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR

PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected, automatic transmission ve-

hicles only. Use of this product in a standard transmission vehicle is

dangerous and contrary to the product's intended use.

What is Included

The control module•

An HX Plus receiver/antenna•

Two 4 - button remote controls (P/N 474P)•

A push-button Valet switch•

Your warranty card•

A shut-down toggle switch•

Important Information

Congratulations on the purchase of your remote start keyless en-

try system. This system has been designed to provide years of trou-

ble free operation. By carefully reading this Owner’s Guide prior

to using your system, you will maximize the use of this system and

its features. Additional or replacement copies of this guide can be

printed by accessing the Directed Electronics internet website at

www.pythoncarsecurity.com

➢System Maintenance

The system requires no speciﬁc maintenance. Your remote is powered

by a miniature 3V CR2032 battery that lasts approximately one year

under normal use. When the battery weakens, the LED on the remote

dims and operating range will be reduced.

➢Your Warranty

Your warranty card must be completely ﬁlled out and returned within

10 days of purchase. Your product warranty will not be honored if

your warranty card is not returned. Make sure that you receive the

warranty card from your dealer. You may also register online at

www.prodregister.com/directed.

Remote Control Functions

The receiver uses a computer-based learn routine to learn the remote

control buttons. The standard button conﬁguration is described below.

➢Standard Conﬁguration



Button

The lock function is controlled by pressing



button for one second.

When held for more than 1.5 seconds, Panic is activated.



Button

The unlocking function is controlled by pressing



on the remote

control for one second. You can also turn Panic off with this button.



Button

Silent Mode™ and an optional auxiliary function are controlled by press-

ing



. Silent Mode works by pressing



for less than one second

before locking or unlocking. An optional trunk release is controlled by

pressing and holding



for 1.5 seconds.

Button

Remote start is activated when you press this button for one second.



Buttons

Car Finder is controlled by pressing these two buttons.



+ +



Buttons

When simultaneously pressed these buttons control the rear window

defogger during remote starting.



and



Buttons

Timer mode is activated when you press these buttons.

Using Your System

➢Locking

Pressing



for one second locks the system. (if the door locks are con-

nected). The horn honks (if connected) and the parking lights ﬂash once

to conﬁrm locking of the system. The optional Failsafe®Starter Kill also

activates and prevents the vehicle’s starter from cranking.

➢Unlocking

Pressing



for one second unlocks the doors (if connected). The horn

honks twice (if connected) and the parking lights ﬂash twice to conﬁrm

unlocking of the system. The optional Failsafe Starter Kill is deactivat-

ed.

➢Disabling (optional) Starter Kill

If your remote control is lost or damaged, you can manually override

the starter kill. To do this, you must have the vehicle's ignition key and

know where the Valet button is located. Be sure to check with the in-

staller for the location of the Valet button.

To override the starter kill, turn the ignition on and press

and release the Valet button within 10 seconds. The

vehicle should start. If it does not start, you may have

waited too long; turn the ignition off and repeat the

process.

Location of Valet button:

____________________

➢ Panic Mode

If you are threatened in or near your vehicle, you can attract attention

by triggering the system with your remote control. Press



for 1.5

seconds to enter Panic Mode. In Panic Mode, the horn will honk and

the parking lights will ﬂash for 30 seconds. To stop Panic Mode at

any time, press



, or



on the remote control.

Note:

In order for Panic Mode to be effective, the vehicle’s horn (or

optional siren) and the vehicle's parking lights must be connected.

➢Remote Start

This feature allows you to remotely start and run your vehicle for a

programmable period of time. This makes it possible to warm up the

engine, as well as adjust the interior temperature of the vehicle with

the climate control system. If interior heating or cooling is desired, the

climate controls must be preset, and the fan blower must be set to the

desired level prior to remote starting the vehicle.

Important!

Never remotely start the vehicle with the vehicle

in gear, and never remotely start the vehicle with the key in the

ignition.

To remote start the vehicle:

Press the• button on the remote control 1 time and hold for 1

second.

The parking lights ﬂash to conﬁrm the vehicle is attempting to start.•

(In gasoline vehicles, the engine will start 4 seconds after the park-

ing lights ﬂash. In diesel vehicles, the engine will start when the

WAIT-TO-START timer has expired.)

Once the vehicle has started, it will run for the pre-programmed•

period of time (12, 24, or 60 minutes) or until a shutdown input

is triggered.

Indice

Altri manuali Directed Electronics Avviamento remoto

Directed Electronics

Directed Electronics Xpresskit CANMAX400 Manuale utente

Directed Electronics

Directed Electronics ProStart CT-3371 Manuale utente

Directed Electronics

Directed Electronics SmartStart 5000-series Manuale utente

Directed Electronics

Directed Electronics Valet 561R Manuale utente

Directed Electronics

Directed Electronics ONE-WAY FM AUTOMATIC/MANUAL TRANSMISSION Manuale utente

Directed Electronics

Directed Electronics 4400 Manuale utente

Directed Electronics

Directed Electronics AM6 Manuale utente

Directed Electronics

Directed Electronics AutoCommand 28624TN Guida rapida

Directed Electronics

Directed Electronics AutoCommand 25622 Guida rapida

Directed Electronics

Directed Electronics Ready Remote 23926 Manuale utente

Directed Electronics

Directed Electronics AutoCommand 28623TN Guida rapida

Directed Electronics

Directed Electronics Python 951 Manuale utente

Directed Electronics

Directed Electronics CLIFFORD 1.3X Manuale utente

Directed Electronics

Directed Electronics 560T Manuale utente

Directed Electronics

Directed Electronics READY REMOTE 24927 Guida rapida

Directed Electronics

Directed Electronics Valet 712T Manuale utente

Directed Electronics

Directed Electronics ProStart CT-5472TW Manuale utente

Directed Electronics

Directed Electronics READY REMOTE 24926 Guida rapida

Directed Electronics

Directed Electronics 553 Manuale utente

Directed Electronics

Directed Electronics VIPER 5901 Manuale utente

Directed Electronics

Directed Electronics PS-3655E-FM Manuale utente

Directed Electronics

Directed Electronics Viper Manuale utente

Directed Electronics

Directed Electronics 410 Manuale utente

Directed Electronics

Directed Electronics Automate 552 Manuale utente

Manuali Avviamento remoto popolari di altre marche

AstroStart

AstroStart 803U Manuale utente

Durite

Durite 0-649-20 Manuale

EINHELL

EINHELL BT-PS 1000 Manuale

Linear

Linear ACCESS AK-21 Specifiche tecniche

Soundstream

Soundstream TARANTULA RS.2 Manuale utente

Jaycar Electronics

Jaycar Electronics MB3752 Manuale utente

Ultra Start

Ultra Start 72 Series Manuale utente

ADS

ADS FLASHLOGIC FLRSVW1 Manuale utente

Selecta

Selecta JS012 Manuale utente

Black Widow Security

Black Widow Security BW RAS 400 Manuale utente

Vector

Vector Power City DK080706 Supplemento

Code Alarm

Code Alarm CA-535 Manuale utente

Ozito

Ozito OJS-800 Manuale utente

Profi-Partner

Profi-Partner 46387 Manuale utente

EZ STARTER

EZ STARTER EZ-45 Manuale utente

Viper

Viper 4204 Manuale utente

Essex Electronics

Essex Electronics KE-1701 Manuale utente

EINHELL

EINHELL EGS 3600 Manuale