DirecTV Universal Remote Control Manuale utente
DIRECTV®Universal
Remote Control
User’s Guide
Remote Control UG-Philips.indd 1Remote Control UG-Philips.indd 1 7/26/05 11:10:44 AM7/26/05 11:10:44 AM
2
CONTENTS
Introduction ............................................................ 3
Features and Functions .......................................... 4
Key Charts ........................................................ 4
Installing Batteries................................................... 8
Controlling Your DIRECTV Receiver ........................ 9
Setting Up Your DIRECTV Remote ................... 9
Onscreen Remote Setup................................... 9
Controlling Your TV............................................... 10
Setting Up the TV Input Key.................................. 10
Deactive the TV Input Select Key..................... 11
Controlling Other Components ............................. 11
Searching for TV, AV1 or AV2 Codes..................... 12
Verifying the Codes ......................................... 12
Changing Volume Lock ........................................ 13
To Lock Volume to AV1, AV2 or TV ................. 13
Restore Factory Default Settings........................... 13
Troubleshooting.................................................... 15
DIRECTV Setup Codes......................................... 16
Setup Codes for DIRECTV Receivers ............. 16
Setup Codes for DIRECTV HD Receivers ....... 16
Setup Codes for DIRECTV DVRs .................... 17
Other Manufacturer Codes ................................... 18
Setup Codes for TVs....................................... 18
Setup Codes for VCRs.................................... 21
Setup Codes for DVD Players ......................... 24
Setup Codes for Stereo Receivers .................. 25
Setup Codes for Stereo Amplifiers................... 27
Repair or Replacement Policy............................... 28
Additional Information ........................................... 29
Compliance With FCC Rules and Regulations ..... 30
FCC Authorization Label ................................. 30
R1.0a - DURC.050503
Remote Control UG-Philips.indd 2Remote Control UG-Philips.indd 2 7/26/05 11:10:46 AM7/26/05 11:10:46 AM
3
INTRODUCTION
Congratulations! You now have an exclusive DIRECTV®
Universal Remote Control that will control four com-
ponents, including a DIRECTV Receiver, TV, and two
stereo or video components (for example, a DVD, stereo,
or second TV). Moreover, its sophisticated technology
allows you to consolidate the clutter of your original
remote controls into one easy-to-use unit that’s packed
with features such as:
• Four-position MODE slide switch for easy component
selection
• Code library for popular video and stereo components
• Code search to help program control of older or dis-
continued components
• Memory protection to ensure you will not have to re-
program the remote when the batteries are replaced
Before using your DIRECTV Universal Remote Control,
you may need to program it to operate with your particu-
lar component. Please follow the instructions detailed in
this guide to set up your DIRECTV Universal Remote
Control so you can start enjoying its features.
Remote Control UG-Philips.indd 3Remote Control UG-Philips.indd 3 7/26/05 11:10:46 AM7/26/05 11:10:46 AM
4
FEATURES AND FUNCTIONS
Key Charts
Slide the MODE switch to
the DIRECTV, AV1, AV2 or
TV positions to select the
component you want to con-
trol. A green LED under each
switch position indicates the
component being controlled.
Press TV INPUT to select
the available inputs on your
TV. (Note: Additional setup
is required to activate the
TV INPUT
key. See instruc-
tions on page 10.)
Press FORMAT to cycle
through the resolution and
screen formats. Each press
of the key cycles to the next
available format and /or reso-
lution. (Not available on all
DIRECTV Receivers.)
Press PWR to turn the select-
ed component on or off.
Press TV POWER ON/OFF
to turn the TV and DIRECTV
Receiver on or off. (Note:
These keys are only active af-
ter the remote has been setup
for your TV. See page 10.)
continued on next page…
AV1 AV2 TV
TV
INPUT
FORMAT
TV
POWER
OFF
ON
PWR
Remote Control UG-Philips.indd 4Remote Control UG-Philips.indd 4 7/26/05 11:10:46 AM7/26/05 11:10:46 AM
5
FEATURES AND FUNCTIONS
Key Charts (continued)
Use these keys to control
your DVR, VCR, DVD,
or CD/DVD player. To re-
cord a program, press the
RECORD key.
REPLAY jumps back 6 sec-
onds and plays video from
that location.
ADVANCE jumps ahead in
a recording.
Use GUIDE to display the
DIRECTV program guide.
Press ACTIVE to access
special features, services,
DIRECTV NEWS™ and
info.
Press LIST to display your
TO DO list of programs. (Not
available on all DIRECTV
Receivers.)
Press EXIT to exit menu
screens and the program
guide and return to live TV.
Press the ARROW keys to
move around in the program
guide and menu screens.
Press SELECT to choose
highlighted items in menu
screens or the program guide.
continued next page…
GUIDE
ACTIVE
LIST
EXIT
SELECT
Remote Control UG-Philips.indd 5Remote Control UG-Philips.indd 5 7/26/05 11:10:48 AM7/26/05 11:10:48 AM
6
FEATURES AND FUNCTIONS
Key Charts (continued)
Press BACK to return to the
previously displayed screen.
Press MENU to display the
Quick Menu.
Press INFO to display current
channel and program infor-
mation when watching live
TV or in the Guide.
Press YELLOW in full-
screen TV to cycle through
alternate audio tracks.
Press BLUE in full-screen
TV to display the Mini-
Guide.
Press RED in the Guide to
jump 1.5 hours back.
Press GREEN in the Guide
to jump 1.5 hours forward.
Other functions vary—look
for onscreen hints or refer to
your DIRECTV Receiver’s
user guide. (Not available on
all DIRECTV Receivers.)
Press VOL to raise or lower
the sound volume. The vol-
ume key is only active when
the remote is setup for your
TV.
While watching TV, press
CHAN p(or q) to select
the next higher (or lower)
channel.
While in the DIRECTV pro-
gram guide or menu, press
PAGE p(or q) to page up
(or down) through available
channels in the Guide.
continued next page…
BACK
MENU
INFO
VOL
PAGE
CHAN
Remote Control UG-Philips.indd 6Remote Control UG-Philips.indd 6 7/26/05 11:10:49 AM7/26/05 11:10:49 AM
7
FEATURES AND FUNCTIONS
Key Charts (continued)
Press MUTE to turn the
sound off or back on.
Press PREV to return to the
last channel viewed.
Press the number keys to di-
rectly enter a channel number
(e.g. 207) while watching TV
or in the Guide.
Press DASH to separate main
and sub-channel numbers.
Press ENTER to activate
number entries quickly.
MUTE
PREV
ABC
21
DEF
3
JKL
5
GHI
4
MNO
6
TUV
8
PQRD
7
WXYZ
9
0
DASH ENTER
Remote Control UG-Philips.indd 7Remote Control UG-Philips.indd 7 7/26/05 11:10:50 AM7/26/05 11:10:50 AM
8
INSTALLING BATTERIES
1. On the back of the remote control, push down on the
door (as shown), slide the battery cover off, and re-
move the used batteries.
2. Obtain two (2) new AA alkaline batteries. Match their
+ and - marks to the + and - marks in the battery case,
then insert them.
3. Slide the cover back on until battery door clicks into
place.
–+
–+
Remote Control UG-Philips.indd 8Remote Control UG-Philips.indd 8 7/26/05 11:10:51 AM7/26/05 11:10:51 AM
9
CONTROLLING YOUR DIRECTV RECEIVER
The DIRECTV Universal Remote Control is designed
to give you access to features and functions found on
your original remote control. To use it with your brand of
DIRECTV Receiver, you will need to setup the remote
control by performing the following steps.
Setting Up Your DIRECTV Remote
1. Locate the DIRECTV Receiver’s brand and model
number (on the back or bottom panel) and write it in
the spaces below.
BRAND: _________________________
MODEL: _________________________
2. Locate the 5-digit code for your DIRECTV Receiver.
(See pages 16-17.)
3. Power on the DIRECTV Receiver.
4. Slide the MODE switch to the DIRECTV position.
5. Press and hold the MUTE and SELECT keys until the
green light under the DIRECTV position flashes twice,
then release both keys.
6. Using the number keys, enter the 5-digit code. If per-
formed correctly, the green light under the DIRECTV
position flashes twice.
7. Aim the remote at your DIRECTV Receiver and press
the PWR key once. The DIRECTV Receiver should
turn off; if it does not, repeat steps 3 and 4, trying each
code for your brand until you find the correct code.
8. For future reference, write down the working code for
your DIRECTV Receiver in the blocks below:
Onscreen Remote Setup
Once your remote is setup to work with your DIRECTV
Receiver, you can set it up for your other equipment us-
ing the steps detailed on the following pages, or you can
set it up it onscreen by pressing MENU, then SELECT
on Settings, Setup in the Quick Menu, then selecting
Remote from the left menu.
Remote Control UG-Philips.indd 9Remote Control UG-Philips.indd 9 7/26/05 11:10:51 AM7/26/05 11:10:51 AM
10
CONTROLLING YOUR TV
Once you have successfully setup your DIRECTV Re-
mote to operate your DIRECTV Receiver, you can set it
up to control your TV. We recommend you use the on-
screen steps described on page 9, but you can also use
the manual method below:
1. Turn on the TV.
NOTE: Please read steps 2-5 completely before pro-
ceeding. Highlight or write down the codes and com-
ponent you wish to setup before moving on to step 2.
2. Locate the 5-digit code for your TV. (See pages 18-
21.)
3. Slide the MODE switch to the TV position.
4. Press and hold the MUTE and SELECT keys at the
same time until the green light under the TV position
flashes twice, then release both keys.
5. Using the number keys enter the 5-digit code for your
brand of TV. If performed correctly, the green light
under TV flashed twice.
6. Aim the remote at your TV and press the PWR key
once. Your TV should turn off. If it does not turn off,
repeat steps 3 and 4, trying each code for your brand
until you find the correct code.
7. Slide the MODE switch to the DIRECTV position.
Press TV POWER. Your TV should turn on.
8. For future reference, write down the working code for
your TV in the blocks below:
SETTING UP THE TV INPUT KEY
Once you have setup the DIRECTV Remote control for
your TV, you can activate the TV INPUT key so you can
change the “source”— the piece of equipment whose
signal is displayed on your TV:
1. Slide the MODE switch to the TV position.
2. Press and hold the MUTE and SELECT keys until the
green light under the TV position flashes twice, then
release both keys.
3. Using the number keys, enter 9-6-0. (The green light
under the TV position flashes twice.)
You can now change the input for your TV.
Remote Control UG-Philips.indd 10Remote Control UG-Philips.indd 10 7/26/05 11:10:51 AM7/26/05 11:10:51 AM
Altri manuali per Universal Remote Control
1
Indice
Altri manuali DirecTV Telecomando
DirecTV
DirecTV RC71 Manuale utente
DirecTV
DirecTV RC71B Manuale utente
DirecTV
DirecTV Universal Remote Control Manuale utente
DirecTV
DirecTV RC65 Manuale utente
DirecTV
DirecTV RC65 Manuale utente
DirecTV
DirecTV Genie Manuale utente
DirecTV
DirecTV RC-64 Istruzioni operative
DirecTV
DirecTV Remote Control Manuale utente
DirecTV
DirecTV RC32 Manuale utente
DirecTV
DirecTV RC73 Manuale utente
