Dish Network Hopper with Sling Manuale
SET UP YOUR
HOPPER WITH SLING
A
STEP 1: Unpair Your Remote
If you are unable to turn on your original receiver, go to step 2.
AOpen the front panel on your
original receiver. Press the
SYSTEM INFO buon.
BLocate your remote from the list
on the right side of the screen.
Then, use your remote control to
highlight the “Unpair” opon and
press the SELECT buon.
QUICK TIP
You will not be able to use your
remote with your replacement
receiver unl you unpair it from
your original receiver.
2
STEP 2: Label and Disconnect Your Cables
ALocate the power cable
for the Hopper that
you are replacing, and
unplug it from the wall.
BLocate the cable
connected to the “Home
Video Network” port
and aach the blue label
to it. Then, unscrew this
cable from the receiver.
Do not unscrew it from
the wall.
CDetermine the cable
you are using to receive
audio/visual signal and
aach the correct label
to it. Then, unplug it from
the receiver, but not from
your TV.
• Orange label- RCA cables
• Red label- YPbPr cable
• Black label- HDMI cable 3
A
STEP 2: Label and Disconnect Your Cables (Cont.)
U.S. PATENTS 5602597,
5604544, 5606374, 6151479
MAY APPLY TO THIS PRODUCT.
US:5GXXXXXXXXXXX
DE50
FCC ID: DKNTK421
FCC ID: DKNTK422
CLocate the cable
connected to the
“Ethernet” port and
aach the yellow label
to it. Then, unplug the
cable from the receiver.
Do not unplug it from
the wall. (You may not
have this cable.)
U.S. PATENTS 5602597,
5604544, 5606374, 6151479
MAY APPLY TO THIS PRODUCT.
US:5GXXXXXXXXXXX
DE50
FCC ID: DKNTK421
FCC ID: DKNTK422
PHONEPHONE
DLocate the cable
connected to the
“Phone” port and aach
a white label to it. Then,
unplug the cable from
the receiver. Do not
unplug it from the wall.
(You may not have this
cable.)
U.S. PATENTS 5602597,
5604544, 5606374, 6151479
MAY APPLY TO THIS PRODUCT.
US:5GXXXXXXXXXXX
DE50
FCC ID: DKNTK421
FCC ID: DKNTK422
ELocate the antenna
connected to the
“Remote Antenna”
port and aach the
green label to it. Then,
unscrew the antenna
from the receiver.
4
STEP 3: Connect the Cables to Your Replacement Receiver
HOME
DISTRIBUTION
HOME
DISTRIBUTION
AConnect the Home Video
Network cable to the “Home
Video Network” port on your
Hopper with Sling.
RCA
COMPOSITE
RCA
COMPOSITE
YPbPr
COMPONENT
YPbPr
COMPONENT
BConnect either the RCA cables,
YPbPr cables, or HDMI cable
to the corresponding port(s) on
your Hopper with Sling.
5
A
STEP 3: Connect the Cables (Cont.)
U.S. PATENTS 5602597,
5604544, 5606374, 6151479
MAY APPLY TO THIS PRODUCT.
US:5GXXXXXXXXXXX
DE50
FCC ID: DKNTK421
FCC ID: DKNTK422
CConnect the Ethernet
cable to the “Ethernet”
port on the replacement
receiver. (You may not
have this cable.)
U.S. PATENTS 5602597,
5604544, 5606374, 6151479
MAY APPLY TO THIS PRODUCT.
US:5GXXXXXXXXXXX
DE50
FCC ID: DKNTK421
FCC ID: DKNTK422
DConnect the Phone
cable to the “Phone”
port on the replacement
receiver. (You may not
have this cable.)
U.S. PATENTS 5602597,
5604544, 5606374, 6151479
MAY APPLY TO THIS PRODUCT.
US:5GXXXXXXXXXXX
DE50
FCC ID: DKNTK421
FCC ID: DKNTK422
EConnect the remote
antenna to the “Remote
Antenna” port on the
replacement receiver.
PHONEPHONE
6
STEP 4: Power Your Equipment
APlug the power cord from your
Hopper into a power outlet, and
ensure that your TV is sll plugged
in. Turn your TV on.
BOpen the panel on the front of
the new receiver and ensure that
the Smart Card is secured rmly in
the slot.
7
A
STEP 4: Power Your Equipment (Cont.)
CYou will see a loading screen,
which could last for several
minutes.
DWhen the Install Wizard screen
appears, go to step 5.
QUICK TIP If you do not see the loading screen,
press the “Source/Input” buon located
on your TV unl this screen appears.
8
STEP 5: Pair Your Remote to Your Hopper
APress the SAT buon on your
remote control to pair it to your
Hopper with Sling. All of your
previous receiver’s recording
mers and other sengs will be
restored automacally.
BOnce your remote is paired, the
Install Wizard will proceed to the
next step automacally.
QUICK TIP
To avoid pairing your remote with mulple
receivers, ensure that you do not have any other
receivers in your home that are on the “Pair Remote
Control” step or in the “Diagnoscs” screen. 9
A
STEP 6: Set Up Text to Speech
AIf you would like to have a digital
voice read the text on screen,
use your remote control to
highlight the “Connue with Text
to Speech” buon. Then, press
SELECT.
BIf you do not want a digital voice to
read the text on screen, use your
remote control to highlight the
“Next” buon. Then, press SELECT.
QUICK TIP If you do not select either opon,
the Install Wizard will automacally
advance aer 30 seconds.
10
Altri manuali per Hopper with Sling
3
Indice
Altri manuali Dish Network Ricevitore
Dish Network
Dish Network DISH411 Manuale utente
Dish Network
Dish Network Wireless Joey Manuale utente
Dish Network
Dish Network Satellite Television Manuale utente
Dish Network
Dish Network Satellite Television Manuale utente
Dish Network
Dish Network WALLY Manuale utente
Dish Network
Dish Network WALLY Manuale utente
Dish Network
Dish Network 196812 Manuale utente
Dish Network
Dish Network ViP 222K Manuale utente
Dish Network
Dish Network HDE-8C-QAM Manuale utente
Dish Network
Dish Network Solo 381 Manuale utente
Dish Network
Dish Network DishPro 322 Manuale utente
Dish Network
Dish Network SoloDVR ViP 612 Manuale utente
Dish Network
Dish Network 811 Manuale utente
Dish Network
Dish Network DuoDVR ViP 922 Manuale utente
Dish Network
Dish Network 622 guide Manuale
Dish Network
Dish Network 123698 Manuale utente
Dish Network
Dish Network 111 Series Manuale utente
Dish Network
Dish Network 118523 Manuale utente
Dish Network
Dish Network ViP 722 Manuale utente
Dish Network
Dish Network DISHPlayer 500 Manuale utente
