Displays2go CFSTN2B Manuale utente

Stand Instructions

CFSTN2B

Table of Contents

Table of Contents and Warnings

Part List

Assembly and Installation

1. Adjust upper and lower poles

2. Attaching to the base assembly

3. Install steel cross rods

4. Install AV Shelf

5. Install the TV

6. Install mount to frame

Tools Required

Phillips Screwdriver

Tape Measure

Wrench

WARNING!

Severe personal injury and property damage can result from improper installation.

Read instructions carefully before beginning.

Assistance is required when installing the TV.

If you do not understand the instructions or have any concerns please contact a

qualified local installer.

Do not install or assemble if the product or hardware is damaged or missing, if you

require replacement parts, contact your local dealer.

This product fits most 40” - 60” flat panel displays; maximum eight for the disply is 100 lbs.

Do not use this product for anything other than what it was originally designed.

This product contains moving parts, please use caution.

The manufacturer disclaims any liability for the modifications, improper installation, and

installation exceeding maxium weight capacity. The manufacturer will not be liable for any

damages arising out of the use of, or inability to use the product.

Tighten Loosen Adjustment

Phillips

Screwdriver

Tape

Measure

Visual Guides

By Hand Hex Wrench

Assistance

Required

7. Webcam shelf installation 10

8. Adjusting the mount 11

GHI

A1x1

A2x4 A3x1

B3x1

C1x1 C2x2

B2x2

B4x4

C3x2

E1x1

E2x1

B1x1

D1x1 D2x1 D3x1 D4x2

1.2

Φ12 6.3

NML

Adjust upper and lower poles

Locate the spring plungers inside the bottom grommet hole of pole

B1 (If your unit has B3 cross bar pre-installed remove prior). Starting

with the right side pole B2, push the spring plunger down and pull

B2 up slightly and twist it slightly so that the spring plunger remains

Repeat the same steps for the left side pole B2 but use your

right foot for stability instead. Align poles B2 and lock the spring

Hold the poles B1 & B2 with your hands and use your left foot on

the cross bridge of B1 for stability. Pull B2 upward until you reach

your desired height. Twist B2 so that the spring plunger locks into

B2 B2

Spring

plunger

Spring

plunger

Lift pole assembly so that the part remains upright and the

cable management holes are facing toward you.

Attaching to the base assembly

Thread casters A2 into the bottom of base A1. Make sure all casters a

re locked to prevent movement during installation.

With allen wrench M attach lower poles B1 to base A1 with screw G.

First through the bottom of base A1, then through the top of base A.

After screws GA3

until it locks into place.

Lock Casters

before assembly

A2 A2

A2 A3

Tighten Fully

with wrench

cable management

holes facing back

Install steel cross rods

Height adjustment

Remove the pre-installed

screws on rod B3. Making

sure the upper poles B2

are aligned, slide rods B3

into the top openings.

Slide the upper poles B2 up or down

to the different spring plunger holes for

your desired height. Install grommet

covers B4 into the grommet holes.

Press and hold both spring

plungers to slide the upper

poles B2.

Refasten rods B3

with screws.

Phillips

screwdriver

H / 1050mm - 1500mm

Assistance

Required

Cables

Unplugged

D4 D4

AV shelf assembly and installation

B, C

VESA: 200x200mm

Phillips

screwdriver

Install the TV

Spacer Suggestions

(B, C)+D,A

Slider plate

Remove pre-installed screws

6Install mount to frame

Make su re casters

are locked prior to

installation

Attach hooks on C1

onto cross rods B5

Secu re lock hook fully

Lock not included

Lift up lock hook

before installing

mount

Heavy Lifting:

Assistance

Requi red

3 4

E1 E2

7Webcam shelf installation

Adjustable height

Phillips

screwdriver

Indice

Altri manuali Displays2go Rack e supporto

Displays2go

Displays2go MGWLSBK Manuale utente

Displays2go

Displays2go RCCDIGITALS Manuale utente

Displays2go

Displays2go DSTANDBK Manuale utente

Displays2go

Displays2go CDSTAND2BK Manuale utente

Displays2go

Displays2go FGAHSCBDK Manuale utente

Displays2go

Displays2go QSCT1117WD Manuale utente

Displays2go

Displays2go PROMXMN Manuale utente

Displays2go

Displays2go RD209O0SV Manuale utente

Displays2go

Displays2go IPPROEVRF Manuale utente

Displays2go

Displays2go WL3SDSG Manuale utente

Displays2go

Displays2go ARTSNFF6 Manuale utente

Displays2go

Displays2go TVSTN01 Manuale utente

Displays2go

Displays2go TVJT321G1 Manuale utente

Displays2go

Displays2go ARTTV70B Manuale utente

Displays2go

Displays2go PROMXMN Series Manuale utente

Displays2go

Displays2go IPDTBL3 Manuale utente

Displays2go

Displays2go VWALL3+ VWALLB Manuale utente

Displays2go

Displays2go LECTWFANAO Manuale utente

Displays2go

Displays2go DGMLTSBK Manuale utente

Displays2go

Displays2go SMMGRDS Manuale utente

Displays2go

Displays2go TVSTNDLBK2 Manuale utente

Displays2go

Displays2go ECOSOC66 Manuale utente

Displays2go

Displays2go NAVIGATOR Series Manuale utente

Displays2go

Displays2go SMAWRDCSC Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente