EC-Remote Remote Control Features
EC-Remote Series 7
Lighting Control
Pressing the lighting key displays the light icon on screen, as well as ALL or 1-x by
default (x being the number of lighting groups managed).
You can then select the lighting group to be controlled by successively pressing the lighting
key (ALL or 1-x corresponds to the simultaneous selection of all the lighting groups).
Once the lighting group is selected, press or to turn the selected lights respectively
on and off, or to increase and decrease the lighting if your installation uses gradual lighting.
Sunblinds Control
Pressing the sunblind key displays the sunblinds icon on screen, as well as ALL or
1-x by default (x being the number of sunblinds groups managed).
You can then select the sunblinds group to be controlled by successively pressing the
sunblind key (ALL or 1-x corresponds to the simultaneous selection of all the sunblinds
groups).
Once the lighting group is selected, press or to respectively raise or lower the
selected sunblinds. Depending on the options and the type of sunblinds, you might achieve
the tilt by keeping the tilt key pressed. Each successive push changes the direction of
the rotation.
Temperature Control
Pressing the temperature setpoint key displays the temperature icon on screen, as
well as the last set value, unless the user’s setting storing has been deactivated by the
building manager.
The temperature setpoint is adjusted in steps and its display depends on your installation.
Numerical: -3 / -2 / -1 / 0 / 1 / 2 / 3
Bar graph:
Press or to increase or decrease the temperature setpoint of your room.
