dji RS 3 PRO Manuale utente
User Manual
2022.06v1.0
2
©2022 DJI All Rights Reserved.
Using this Manual
Legend
Warning Important Hints and Tips Reference
Before You Begin
The following documents have been produced to help you safely operate and make full use of your
DJITM RS 3 Pro.
DJI RS 3 Pro Quick Start Guide
DJI RS 3 Pro User Manual
DJI RS 3 Pro Safety Guidelines
Read the entire quick start guide and user manual and watch the informational and tutorial videos on
the product page of the DJI ocial website (https://www.dji.com/rs-3-pro). Read the safety guidelines
to understand your legal rights and responsibilities. If you have any questions or problems during the
installation, maintenance, or use of this product, contact DJI or a DJI authorized dealer.
Download the Ronin App and Watch the Tutorial Videos
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a
search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
https://s.dji.com/guide21
Ronin App
Android 7.0 or aboveiOS 11.0 or above
©2022 DJI All Rights Reserved. 3
Using this Manual 2
Legend 2
Before You Begin 2
Download the Ronin App and Watch the Tutorial Videos 2
Introduction 4
DJI RS 3 Pro Diagram 5
Using For The First Time 6
Charging the Battery 6
Attaching the Extended Grip/Tripod 6
Activation 7
Firmware Update 7
Mounting the Camera 8
Balancing 11
Briefcase Mode 14
Auto Tune 14
Operations 15
Button and Port Functions 15
Touchscreen 17
Ronin App Settings 22
BG30 Grip and Built-In Battery 33
Operation Modes 36
Maintenance 36
Specications 37
Contents
4
©2022 DJI All Rights Reserved.
Introduction
DJI RS 3 Pro is a professional single-handed 3-axis gimbal specically designed for DSLR and small
cinema cameras. It is compatible with a wide range of mainstream cameras using a 24-70mm F2.8 lens
and supports a tested payload of up to 4.5 kg. DJI RS 3 Pro boasts enhanced gimbal performance
thanks to the 3rd-Gen RS Stabilization Algorithm.
With the brand-new automated axis locks, DJI RS 3 Pro enables faster and more convenient installation,
balancing, and storage. With a 1.8-inch OLED full-color touchscreen, users can calibrate the gimbal
and set parameters. The onboard buttons allow users to control the gimbal movement, photo capture,
recording, and camera focus. By implementing Dual-Mode Bluetooth, RS 3 Pro supports wireless shutter
control. The onboard RSA/NATO port supports the DJI R Focus Wheel, DJI RS Briefcase Handle and
DJI R Twist Grip Dual Handle. The detachable grip has a built-in battery with a capacity of 1950 mAh,
providing a maximum standby time of up to 12 hours.*
After connecting to the Ronin app, easily control gimbal movement and parameter settings. With the
DJI Ronin Image Transmitter mounted, users can shoot smooth footage while automatically tracking a
subject with ActiveTrack Pro.
RS 3 Pro uses the DJI LiDAR Range Finder (RS) and DJI RS Focus Motor (2022) to enable autofocus
with manual lenses.
With the DJI Video Transmitter mounted, RS3 Pro can use DJI Master Wheels and DJI Force Pro to
control the gimbal and camera. Connect the DJI Remote Monitor and Ronin 4D Hand Grips to the RS 3
Pro for monitoring and remote control.
* Measured with the equipment in a level and stationary state, the gimbal balanced, three axes in an active
state, and the battery only powering the gimbal.
DJI RS 3 Pro User Manual
©2022 DJI All Rights Reserved. 5
1
13
2
3
4
5
6
7
8
9
10
11
12
14
15
16
17
18
19
20 22
23
24
25
21
15. RSS Camera Control Port (USB-C)
16. Focus Motor Port (USB-C)
17. Video Transmission/LiDAR Range Finder
Port (USB-C)
18. Front Dial
19. Trigger
20. Power Port (USB-C)
21. Battery Level Button
22. Battery Level Indicators
23. Grip Lever/Safety Button
24. Roll Lock
25. Roll Motor
1. Upper/Lower Quick-Release Plate
2. 1.8-inch OLED Full-Color
Touchscreen
3. Joystick
4. Camera Control Button
5. BG30 Grip (Built-in battery with
1/4"-20 screw hole)
6. Extended Grip/Tripod
7. M Button
8. Power Button
9. Gimbal Mode Switch
10. Ronin Series Accessories (RSA)/
NATO Ports
11. Pan Lock
12. Pan Motor
13. Tilt Lock
14. Tilt Motor
DJI RS 3 Pro Diagram
DJI RS 3 Pro User Manual
6
©2022 DJI All Rights Reserved.
Using For The First Time
Charging the Battery
Before using for the rst time, charge the battery grip through the power port using a charging cable
(included) and a USB adapter (not included). It is recommended to use a USB adapter with QC 2.0 and
PD protocol (max. 24 W).
During charging and usage, the battery level indicators indicate the battery level. When not in use, press
the battery level button to check the battery level.
LowHigh
Attaching the Extended Grip/Tripod
1. Attach the extended grip/tripod to the grip , tighten , and then unfold the tripod .
2. Insert the grip into the gimbal as shown . Make sure the grip lever is in the unlocked position, and
then toggle to the locked position after attaching .
2
1
4
3
5
Safety Button
To remove the grip, toggle the lever to the unlocked position, hold down the safety button, and pull the
grip away from the gimbal.
DJI RS 3 Pro User Manual
©2022 DJI All Rights Reserved. 7
Activation
Activation is required for DJI RS 3 Pro through the Ronin app. Follow the steps below to activate RS 3 Pro:
1. Press and hold the power button to power on RS 3 Pro, and select the language on the
touchscreen.
2. Scan the QR code on the screen to download the Ronin app. If the activation step is skipped, the
gimbal will unlock automatically and prompt on-screen instructions.
3. Enable Bluetooth on the mobile phone. Launch the Ronin app and log in with a DJI account. Select
DJI RS 3 Pro, type in the default password 12345678, and activate the gimbal according to the
instructions. An internet connection is required for activation. The gimbal will unlock automatically
after activation is successful.
DJI RS 3 Pro supports up to ve uses without activation. After that, activation is required for
further use.
2s
Firmware Update
If new rmware is available, you will be notied by the Ronin app. Update the rmware according to the
on-screen instructions. Do not power o the gimbal or exit the app during the rmware update.
The Ronin app will prompt if the update is successful. If the update fails, restart the gimbal and Ronin
app, and try again.
Make sure the gimbal has sucient power before updating.
Ensure the mobile phone is connected to the internet when updating.
Do not power o the gimbal when updating.
The axis locks will lock automatically when the update starts. It is normal for the axis locks to
lock or unlock during the process.
DJI RS 3 Pro User Manual
8
©2022 DJI All Rights Reserved.
Mounting the Camera
Supported Cameras and Lenses
DJI RS 3 Pro has been rigorously tested to support a payload of 4.5 kg. Make sure the combined
weight of the camera, lens, and other accessories are within 4.5 kg. Refer to the ocial DJI website
(https://www.dji.com/support/compatibility) for the most updated Ronin Series Compatibility List.
Mounting a Camera
Make sure to prepare the camera before mounting it to DJI RS 3 Pro. Remove the lens cap and check
that the battery and memory card are inserted in the camera.
Make sure DJI RS 3 Pro is powered o or in sleep mode before mounting the camera. Toggle the tilt
lock and roll lock to the unlocked position and adjust the gimbal position as shown, and then toggle the
two locks to the locked position.
Roll Lock
Tilt Lock
1. Attach the Upper Quick-Release Plate
Attach the upper quick-release plate to the camera by tightening the screw.
DJI RS 3 Pro User Manual
©2022 DJI All Rights Reserved. 9
2. Attach the Lower Quick-Release Plate and Lens-Fastening Support
Toggle the lever on the lower quick-release plate to the unlocked position , then insert the camera
and toggle the lever to the locked position after it is engaged. Attach the lens-fastening
support to the lower quick-release plate .
It is recommended to use the lens-fastening support when using a long or heavy lens, and always
use the lens-fastening support before enabling SuperSmooth mode.
To remove the camera from the lower quick-release plate, toggle the lever to the unlocked position
and remove the camera while pressing the safety lock beside the lever.
1
2
34
Safety Lock
3. Attach the Camera to the Gimbal
Toggle the lever on the camera mounting plate to the unlocked position and insert the lower quick-
release plate . Toggle the lever to the locked position once the camera is roughly balanced.
1
2
3
DJI RS 3 Pro User Manual
10
©2022 DJI All Rights Reserved.
To remove the lower quick-release plate, toggle the lever on the camera mounting plate to the
unlocked position and remove the lower quick-release plate while pressing the safety lock on the
mounting plate.
4. Connecting a Camera
DJI RS 3 Pro supports wireless camera connection using Bluetooth, camera control is available
without a cable connection. Swipe down from the top of the touchscreen on the Home screen to
enter the Control Center. Tap the Bluetooth icon and tap connect, the gimbal and camera will start
to pair. The Bluetooth icon turns blue indicating connection is successful.
For Sony-series cameras, remote Bluetooth control needs to be enabled before connecting to the
gimbal.
For Canon-series cameras, remote control mode for photo or record mode needs to be enabled
before connecting to the gimbal.
For BMPCC-series cameras, the password is required before connecting to the gimbal.
Refer to the Ronin Series Compatibility list for more camera settings when using a Bluetooth
connection.
Choose the proper camera control cable for cameras that do not support Bluetooth according to the
camera type. Plug one end of the cable into the camera and plug the other end into the RSS camera
control port of the gimbal.
Refer to the Ronin Series Compatibility list for supported camera models.
Some camera control cables need to be purchased separately.
Altri manuali per RS 3 PRO
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali dji Accessori per fotocamere
dji
dji OM 4 Manuale utente
dji
dji OSMO MOBILE 3 Manuale utente
dji
dji OM 4 Manuale utente
dji
dji RONIN-SC Manuale utente
dji
dji RS 2 Manuale utente
dji
dji Ronin S2 Manuale utente
dji
dji MG-12000 Manuale utente
dji
dji RONIN 2 Manuale utente
dji
dji Thumb Controller Manuale utente
dji
dji Osmo Pocket Manuale utente
dji
dji ZENMUSE X7 Manuale utente
dji
dji ZENMUSE H4-3D Manuale utente
dji
dji OSMO Manuale utente
dji
dji AGRAS T30 Manuale utente
dji
dji OSMO Manuale utente
dji
dji OSMO MOBILE 3 Manuale utente
dji
dji RONIN 4D Manuale utente
dji
dji Ronin Manuale utente
dji
dji Ronin-S Manuale utente
dji
dji Phantom 2 Vision + Manuale utente
