DK-Audio PT 5201 Compact VariTime Manuale utente

DK-AUDIO A/S

Marielundvej 37 D

DK-2730 Herlev

Denmark

PT 5201

Compact VariTimeTM Sync Generator

Operating Manual

PT 5201 Compact VariTimeTM Sync Generator

Printed: November 2001

Revision: 2

Publication number: 9499 491 02212

PT 5201 PTV Contents

Operating Manual Revision 2

1Contents

1CONTENTS...................................................................................................................I

2SAFETY...................................................................................................................2-1

2.1 INTRODUCTION ...................................................................................................2-1

2.2 SAFETY PRECAUTIONS .........................................................................................2-1

2.3 USE OF CAUTION AND WARNING STATEMENTS.........................................................2-1

2.4 IMPAIRED SAFETY PROTECTION.............................................................................2-2

2.5 TECHNICAL SPECIFICATION...................................................................................2-2

2.5.1 EQUIPMENT RATINGS.....................................................................................2-2

2.6 ELECTROSTATIC SENSITIVE DEVICES......................................................................2-3

2.7 SYMBOLS...........................................................................................................2-4

3INTRODUCTION AND APPLICATIONS ......................................................................3-1

3.1 INTRODUCTION ...................................................................................................3-1

3.2 CONFIGURATION .................................................................................................3-1

3.3 APPLICATIONS ....................................................................................................3-2

4PRODUCT DATA.....................................................................................................4-1

4.1 SAFETY CHARACTERISTICS ...................................................................................4-1

4.2 PERFORMANCE CHARACTERISTICS.........................................................................4-1

4.3 SUMMARIZED DATA .............................................................................................4-1

4.3.1 MASTER FREQUENCY REFERENCE TCXO .........................................................4-1

4.3.2 REMOTE CONTROL........................................................................................4-1

4.3.3 ANALOG GENLOCK ........................................................................................4-1

4.3.4 ANALOG BLACK BURST OUTPUTS ....................................................................4-2

4.3.5 VIDEO SIGNAL GENERATOR............................................................................4-2

4.3.6 AES/EBU AUDIO GENERATOR........................................................................4-3

4.3.7 WORDCLOCK (WCLK) GENERATOR.................................................................4-4

4.3.8 ANALOG AUDIO GENERATOR...........................................................................4-4

4.3.9 PRESETS.....................................................................................................4-5

4.4 ENVIRONMENTAL CONDITIONS...............................................................................4-6

4.4.1 REGULATIONS AND STANDARDS.......................................................................4-6

4.4.2 CLIMATIC CONDITIONS ...................................................................................4-6

4.4.3 MECHANICAL REQUIREMENTS .........................................................................4-6

4.4.4 SAFETY .......................................................................................................4-6

4.5 POWER SUPPLY..................................................................................................4-6

4.6 MECHANICAL DATA..............................................................................................4-6

5INSTALLATION........................................................................................................5-1

5.1 ACCESSORIES ....................................................................................................5-1

Contents PTV PT 5201

Revision 2 Operating Manual

5.2 INITIAL INSPECTION..............................................................................................5-1

5.3 SAFETY INSTRUCTION..........................................................................................5-1

5.3.1 GROUNDING .................................................................................................5-1

5.4 MAINS VOLTAGE CORD AND FUSES ........................................................................5-1

5.5 RACK MOUNTING ................................................................................................5-2

5.5.1 RACK MOUNT INSTRUCTIONS ..........................................................................5-2

5.6 ACCESS TO AND REPLACEMENT OF PARTS ..............................................................5-4

6OPERATING INSTRUCTIONS ...................................................................................6-1

6.1 INSTRUMENT DESCRIPTION...................................................................................6-1

6.2 FRONT PANEL.....................................................................................................6-1

6.3 HOW TO GET STARTED ........................................................................................6-2

6.4 REAR PANEL ......................................................................................................6-3

6.5 PC REMOTE CONTROL PROGRAM.........................................................................6-3

6.5.1 APPLICATION DESCRIPTION.............................................................................6-3

6.5.2 MENU DESCRIPTION ......................................................................................6-4

7REMOTE INTERFACE ............................................................................................7-11

7.1 GENERAL DESCRIPTION OF THE INTERFACE SYNTAX...............................................7-11

7.1.1 CONNECTOR DESCRIPTION...........................................................................7-11

7.1.2 PROTOCOL.................................................................................................7-11

7.1.3 CONFIGURATION AND SYNTAX.......................................................................7-12

7.1.4 GENERAL INFORMATION ...............................................................................7-12

7.1.5 SYNTAX ELEMENTS .....................................................................................7-13

7.1.6 COMMAND SYNTAX......................................................................................7-14

7.1.7 SYNTAX OF PROGRAM MESSAGES .................................................................7-14

7.1.8 LONG AND SHORT FORM ..............................................................................7-15

7.1.9 SYNTAX OF RESPONSE MESSAGES ................................................................7-15

8COMMANDS SUMMARY..........................................................................................8-1

8.1 MANDATED COMMANDS........................................................................................8-1

8.2 REQUIRED COMMANDS ........................................................................................8-1

8.2.1 SYSTEM SUBSYSTEM....................................................................................8-1

8.2.2 STATUS SUBSYSTEM ....................................................................................8-2

8.3 INSTRUMENT COMMANDS .....................................................................................8-2

8.3.1 INPUT SUBSYSTEM .......................................................................................8-2

8.3.2 OUTPUT SUBSYSTEM....................................................................................8-2

9COMMANDS EXPLANATION....................................................................................9-1

9.1 MANDATED COMMANDS........................................................................................9-1

9.2 REQUIRED COMMANDS ........................................................................................9-2

9.2.1 SYSTEM COMMANDS ....................................................................................9-2

9.2.2 STATUS COMMANDS .....................................................................................9-3

9.3 INSTRUMENT COMMANDS .....................................................................................9-4

9.3.1 INPUT COMMANDS ........................................................................................9-4

9.3.2 OUTPUT COMMANDS ....................................................................................9-5

10 ERROR CODES.....................................................................................................10-1

PT 5201 PTV Contents

Operating Manual Revision 2

iii

10.1 COMMAND ERRORS [-199, -100] .........................................................................10-1

10.2 EXECUTION ERRORS [-299, -200]........................................................................10-1

10.3 DEVICE SPECIFIC ERRORS [-399, -300]................................................................10-2

11 PT 5201 SIGNALS...............................................................................................11-1

11.1 VIDEO PATTERNS..............................................................................................11-1

11.2 PATTERN SELECTIONS AFTER SYSTEM CHANGE.....................................................11-2

11.3 AUDIO SIGNALS ................................................................................................11-2

11.4 RESET CONFIGURATION.....................................................................................11-4

PT 5201 PTV Safety

Operating Manual Revision 2

2Safety

Read this chapter carefully before installation and use of the instrument.

2.1 Introduction

The instrument described in this manual is designed to be used by properly trained personal

only.

Only qualified personnel who are aware of hazards involved shall carry out adjustment,

maintenance and repair of the exposed equipment.

2.2 Safety Precautions

For the correct and safe use of the instrument, it is essential that both operating and servicing

personnel follow generally accepted safety procedures in addition to the safety precautions

specified in this manual. Specific warning and caution statements, where applicable, are found

throughout this manual.

Warning and caution statements and/or symbols are marked on the instrument as well.

Special attention must be paid to the following issues:

♦Protective grounding of the instrument is required for the accessible terminals to be safe.

(IEC 1010-1 Safety class I instrument)

♦The actual environmental conditions must be checked against the specification.

♦Mains voltage must be inside the specified range.

The opening of covers or removal of parts, except those to which access can be gained by

hand, is liable to expose live parts and terminals.

If adjustment, maintenance, or repair of the opened instrument is unavoidable, only a skilled

person who is aware of the hazards involved must carry it out.

2.3 Use of Caution and Warning Statements

Caution

Used to indicate correct operation or maintenance in order to prevent damage to, or destruction

of equipment or other property.

Warning

Used to indicate a potential hazard that requires correct procedures or practices in order to

prevent personal injury.

Safety PTV PT 5201

Revision 2 Operating Manual

2-2

2.4 Impaired Safety Protection

Whenever it is likely that safe operation is impaired, the instrument must be made inoperative

and secured against unintended operation. The appropriate servicing authority must be

informed.

For example, safety is likely to be impaired if the instrument fails to perform the intended

functions or shows visible damage.

The instrument is NOT equipped with a mains interruption switch, and thus to be made

inoperative by unplugging its mains connection lead, or by other means prior of the instrument

WARNING: Protection provided by the equipment may be impaired if the equipment is used in a

manner not specified by this manual.

2.5 Technical Specification

This manual provides technical information important for safe operation of the equipment.

Please refer to chapter 4Product Data for information regarding technical specifications and to

chapter 5Installation and chapter 6Operating Instructions regarding instructions for use.

Technical assistance may be obtained from your local PTV customer support organization or

from:

DK-Audio

Marielundvej 37D

DK-2730 Herlev

Denmark

Phone: +45 44 85 02 55

Fax: +45 44 85 02 50

E-Mail: [email protected]

Website: http://www.ptv.dk and http://www.DK-Audio.com

2.5.1 Equipment Ratings

The instrument can be used with a mains voltage supply of:

Voltage:

90-250 VAC

Frequency:

47-63 Hz

The power Consumption:

Does not exceed 25 Watts.

The instrument is designed for the following environmental conditions:

Indoor use

PT 5201 PTV Safety

Operating Manual Revision 2

Altitudes up to 2000m

Temperatures between 5°C and 45°C

Maximum relative humidity of 80% for temperatures up to 31°C decreasing linearly to 50%

relative humidity at 40°C.

The instrument is equipped with a number of input and output terminals as described in chapter

4Product Data.

The terminals are protected from becoming live by means of basic insulation and protective

screening.

Whenever it is likely that safe operation is impaired, the instrument must be made inoperative

and secured against unintended operation. The appropriate servicing authority must be

informed.

For example, safety is likely to be impaired if the instrument fails to perform the intended

operations or shows visible damages.

2.6 Electrostatic Sensitive Devices

All IC and many other semi-conductors are susceptible to electrostatic discharges (ESD).

Careless handling during repair can reduce lifetime drastically.

When repairing, make sure that you are connected to the same potential as the mass of the set

via a wrist wrap with resistance. Keep component and tools at this potential.

Safety PTV PT 5201

Revision 2 Operating Manual

2-4

2.7 Symbols

Symbol Explanation:

Caution, risk of electric shock.

Caution (refer to accompanying documents)

Protective conductor terminal.

Alternating current

Indice

Manuali Generatore portatile popolari di altre marche

Kohler

Kohler 20EORZ Manuale di istruzioni

Powerhorse

Powerhorse 83171 Manuale utente

HURST

HURST ML-630-SI Manuale utente

ETQ

ETQ TG4000 Manuale utente

Briggs & Stratton

Briggs & Stratton 40265 Guida all'installazione

ConMed

ConMed 7550 Manuale utente

Owon

Owon Waveform Generator Manuale utente

evertz

evertz 7700 Series Manuale utente

Power Stroke

Power Stroke PS906025 Manuale utente

Firefly

Firefly Cygnus CYG2400/460/24 Manuale utente

Draper

Draper PG950S Aggiornamento firmware

PowerBoss

PowerBoss PowerBoss Manuale utente

SDMO

SDMO SH 4000 Manuale utente

EINHELL

EINHELL STE 5500 Manuale utente

Wanco

Wanco WI3000P Manuale utente

Full Boar

Full Boar FBT-3300 Manuale utente

Dwyer Instruments

Dwyer Instruments ASG Manuale utente

Westinghouse

Westinghouse WH1000i Series Manuale utente