Dormak CR43 Manuale utente

CR43

LAWN MOWER

Operators Manual

INDEX

01 Warnings pag. 05

02 Safety precautions pag. 05

2.1 Meaning of the symbols axed on the machine pag. 05

2.2 General advices pag. 06

2.3 Electricity pag. 06

2.4 Cables pag. 07

2.5 Preparing pag. 07

2.6 Operating pag. 07

2.7

Storage and maintenance

pag. 08

03 Lawn-mower assembling pag. 08

3.1

Guiding handlebar assembling

pag. 08

3.2

Grass bag assembling

pag. 08

04 Functioning pag. 09

4.1 How to adjust cutting height pag. 09

4.2 How to start and stop pag. 09

4.2.1 How to start the lawn-mower pag. 09

4.2.2 How to stop the lawn-mower pag. 09

4.3 How to know when the grass bag is full pag. 09

4.4 How to apply the mulching adapter pag. 09

4.5 How to mow pag. 09

05 Care and maintenance of the lawn-mower pag. 10

5.1 How to clean the equipment pag. 10

5.2 How to store the lawn-mower pag. 10

06 Solving problems pag. 11

07 Warranty pag. 11

08 Maintenance advises pag. 11

01. WARNINGS

02. SAFETY

PRECAUTIONS

02.1. Meaning of the symbols axed on

the machine

Do not use any liquid products

for cleaning the equipment.

Any repairs must only be made

by authorized Dormak agents.

This lawn-mower can be

dangerous and may cause

serious injuries to the operator

or other persons, unless all

these safety warnings and

instructions are strictly attended. The

operator is responsable for correctly

reading and understanding them. Under

this condition only a safe operation of the

equipment will be guaranteed.

DANGER! Read the Instructions

Manual before operating.

Do not expose or use the

equipment under rainy weather.

Risk of injuries by slipping – do

not mow when the grass is wet.

Never place hands, feet or any

other parte of the body near

rotative elements.

Withdraw the lawn-mower’s

electric plug from power supply

before any maintenance or

cleaning operations.

Risk of injuries by ejected solid

objects.

Working on steepy slopes can

be dangerous

Risk of object ejection. No

person, specially children, or

animals must be allowed within

the working area.

Keep the electric cable away

from the cutting tools.

2.2. General advices

1. This device must not be operated by

persons with physical, mental ou sensitive

disabilities, by children or by anyone who

doesn’t have adequate experience or

knowledges. Children must not be allowed to

play with the device. As general prevention,

children under 16 years old aren’t authorized

to operate the machine.

2. This appliance must only be used for

the purposes specied at this guide, and

according the specied instructions.

3. Never operate the machine if you are tired,

ill or under the inuence od alcohol, drugs or

medicines.

4. The user is responsable for any accidents

which may cause damages to other

individuals or objects.

2.3. Electricity

1. We recommend the use of a R.C.D.

(Residual Current Device) with a shutdown

current not exceeding 30mA. However, even

the use of this device does not assures total

security, therefore all security practices

must be always observed. Check the R.C.D.

everytime it will be used.

2. Before operate the lawn-mower always

check the electric cable : if the cable is

damaged or in bad condition do not operate

the machine without replacing it.

3. If the electric cable is cut or its insulating

coating is damage during operation shut o

electricity immediately. Do not touch the electric

cable until electricity is shutted o. Damaged

cables must be replaced and not repaired!

4. The electric cable must be unrolled; an

rolled cable may overheat, which will reduce

the lawn-mower performance.

5. Keep the electric cable as far as possible

from the machine, and all the equipment

away from the power source. Mow the grass

by parallel lines rather than in circles.

6. Do not drag the electric cable over sharp

objects.

7. Always turn o the lawn-mower before shutting

o the equipment from the power supply.

8. Turn o the lawn-mower, shutt o the

electric plug and make sure that the cable

isn’t damaged before wrapping and storing

it. Never repair a damage cable, replace it

instead.

9. Wrap the electric cable carefully to avoid

making knots.

10. Never drag the lawn-mower by pulling

the cable.

11. Never disconnect the power supply by

pulling the cable.

12. The electric voltage allowed for this

lawn-mower is AC 230V.

13. This equipment is electrically isolated : never

make the earthing of any of its components nor

remove its insutation.

2.4. Cables

All extension cords to be used must

meet the minimum sections listed on the

following table:

2.5. Preparing

1. When operating the machine always wear

protective clothing, which includes safety

shoes and long straight trousers.

2. Be sure that there are no sticks, stones,

wires or any kind of object on the lawn that

might be ejected by the machine or damage

the blades.

3. Before using the machine or if a electric

shock occurs, check if there is any damaged

or worn element; if so, it must be immediately

replaced.

4. Whenever the blades are replaced, we

recommend the replacement of the whole

cutting unit, to avoid imbalances.

2.6. Operating

1. Work only at daylight or under good

articial lighting.

2. Do not mow when the grass is wet, neither stand

barefoot on it.

3. When mowing on steep slopes be careful

about slipping; wear adequate shoes.

4. Always mow crossways to the slope, never

upwards or down-wards.

5. Be particulary careful when changing

direction, specially on slopes.

6. Always work at walking speed, do not run.

7. Keep a safe and stable position, specially

on slopes. Do not use the machine near pools

or wells.

8. Be particulary careful when mowing in

reverse, there is the risk of stumble.

9. Do not mow pulling the machine towards you.

10. Never lift or carry the appliance when

it is functioning, specially over non lawny

sufarces.

11.Never operate the machine when its safety

devices are damaged or bad positioned.

12. Keep your hands and feet away from

the cutting elements, specially if the engine

is running. During repairing or checking

procedures on cutting elements always

wear gloves and adequate clothing. These

procedures must always be made when

the engine is switched o and the machine

completely disconnected from the power

suplly.

13. Do not tilt the equipment when the

engine is running or if it is connected to the

power supply.

14. Keep your hands away from grass

discharge slot.

VOLTAGE CABLE

LENGTH

MINIMUM

DIAM.

230 V / 50 Hz Up to 20 m 1.5 mm2

230 V / 50 Hz 20 – 50 m 2.5 mm2

15. Never lift or carry the machine when the

engine is running or if it is connected to the

power supply.

16. Disconnect the equipment from the

power supply:

- Everytime the machine is left unattended

by who has the hability to operate it;

- Before removing any object that may be

blocking the machiner;

- Before checking or handling any electric

component;

- If the machine hits an object. Do not re-use

the equipment without making sure that it is

in good working and safety conditions;

- If the machine starts vibrating in an unusual

way, switch it o immediately and check if

the blade is correctly tightened. In doubt,

refer to an Dormak’s authorized agent.

2.7. Storage and maintenance

1. Danger : do not touch a blade when it is

rotating, only when it is stopped, with no

connection to the power supply and wearing

protective gloves and adequate clothing.

2. Keep every screws, pins and nuts well

tightened, to asure that the machine is

working under the best safety conditions.

3. Check frequently the grass bag looking for

any kind of wear or damage.

4. For safety and performance reasons

replace all the dammage or worn parts.

5. All the replacement parts to be applied on

this machine must be Dormak origin, or have

Dormak’s approval.

6. Store the equipment on a cool dry location,

out of reach of children. Do not store on the

outside.

03. LAWN-MOWER

ASSEMBLING

3.1. Guiding handlebar assembling

1. Remove the protective sponge which

covers the handlebar;

2. Make sure that the electric cable isn’t

wraped and position it on the outside of the

handlebar;

3. Insert the handlebar on the lower arm as

shown in picture A;

4. Select the required handlebar height, 1 or

2, and insert the screws (picture B);

5. Position the rapid clamping screw axle into

its hole (picture C), clamp it (X turns) and lock it.

6. Place the cable xing braces as shown on

picture D.

3.2. Grass bag assembling

1. Hook the suport wire of the grass bag on

the hard-top, as shown in picture E.

04. FUNCTIONING

4.1. How to adjust cutting height

Cutting height adjustment is made by moving

up or down-wards the height lever near the

wheels (picture F).

The lawn-mower allows 6 cutting height

positions from 20 mm up to 65 mm.

Note: the recommended cutting height for

most lawns corresponds to medium position.

The quality of cutting and grass colection may

be aected by a overly low cutting height.

4.2. How to start and stop

4.2.1. How to start the lawn-mower

1. Connect the extension cable to the comands

device;

2. Be sure that the extension cable doesn’t

stand under the lawn-mower;

3. Connetc the extension cable to the power

supply socket;

4. The comands device is equipped with a

“lock off” button, which helps to prevent

that the machine starts unexpectedly. Press

the button “lock off” and than press the

“on/off” lever on the device, keeping it

pressed for the entire period the machine

is intended to function. When the “on/off”

lever is pressed the “lock off” button must

be released (picture G)

Note: do not press/release the “on/o”

lever repeatedly, as this can cause serious

damages to the engine.

4.2.2. How to stop the lawn-mower

1. Release the “on/o” lever (Picture H).

4.3. How to know when the grass bag is full

As the grass bag becomes full the level

indicator cover becomes gradually closed

(picture I). When the cover is completely

closed, shut o the machine and empty the

grass bag contents.

4.4. How to apply the mulching adapter

1. For taking this procedure the lawn-mower

must be turned o and disconnected from

the power source. The user must wear

adequate gloves and clothing.

2. Remove the grass bag from the machine;

3. Position the machine as shown on picture J;

4. Place the mulching adapter as shown on

picture K. Be sure that the mulching adapter

is properly xed before replacing the

machine on its normal position.

4.5. How to mow

This lawn-mower can be used to mow in the

following dierent ways:

- With grass bag applied : the grass is eectively

colected and compressed inside the bag.

- With mulching adaptor : the grass is cut

and smashed in to very little pieces which

will turn into a good fertilizer for the lawn.

1. Start mowing on the area next to the

power supply socket, so that the extension

cable may extend over the lawn as you get

far from the socket.

2. Mow more often during the growth period,

as the grass must be cut maximum a 1/3

height at a time.

Do not overcharge the lawn-mower

Cutting a too high grass will lead to a lower

engine rotation which can be clearly heard.

As speed decreases, the engine may become

overloaded and the lawn-mower damaged. If

the grass is very high and dense the rst cut

must be made at a reasonable height, and, if

you want a shorter grass, cut it a second time

at a lower height. This is a good way to avoid

the engine overcharge.

05. CARE AND

MAINTENANCE OF THE

LAWN-MOWER

5.1. How to clean the equipment

- Always use adequate gloves;

- IMPORTANT: keeping the lawn-mower

clean is very important. Grass residues on

the air entrances or under the deck may be

dangerous for re hazard.

1. Wip out the grass from the deck with a

brush;

2. With a soft brush, remove all residues

from the air entrances, grass ejection gap

and grass bag;

3. Clean the visible surfaces of the machine

with a dry wiper.

- IMPORTANT: never clean the lawn-mower

with water. Do not use chemical products,

including gasoline, nor solvents – these

substances may damage some important

plastic pieces.

5.2. How to store the lawn-mower

Store it at a fresh dry palce, protected

from damages and out of children reach.

Never store outside.

At the end of the season:

1. Replace any nuts, oins or screws, if

necessary.

2. Properly clean the equipment.

3. Make sure the electric cable is quite tidy to

prevent damages.

Indice

Altri manuali dormak Taglia erba

dormak

dormak EP Manuale utente

Manuali Taglia erba popolari di altre marche

RHINO

RHINO 1958 Manuale utente

Wolf Garten

Wolf Garten Compact plus 40 B Manuale utente

Cub Cadet

Cub Cadet LTX 1045 Manuale utente

Craftsman

Craftsman 917.378461 Manuale utente

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuale utente

Challenge

Challenge CH18V2 Istruzioni operative

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuale utente

DEWEZE

DEWEZE ATM-725 Manuale operativo

Weed Eater

Weed Eater 180083 Manuale utente

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuale utente

Better Outdoor Products

Better Outdoor Products Quick Series Manuale utente

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuale operativo

MTD

MTD 795, 792, 791, 790 Manuale utente

Toro

Toro Groundsmaster 3505-D Manuale utente

Dennis

Dennis FT 610 Manuale utente

AIRFORCE

AIRFORCE F-15 Gen 3 Manuale utente

MTD

MTD 126-220-000 Manuale utente

Toro

Toro 74806 Manuale utente

dormak CR43 Manuale utente

Manuali Taglia erba popolari di altre marche