Doro X30 Manuale utente
X30Telephone
User Guide
DORO Audioline Ltd.
1
DORO X30
Introduction
Thank you for purchasing this telephone.
The DORO X30 is one of a new series of especially designed, high quality
telephones. A number of user friendly features are available which include LCD,
clock, call timer, thirteen memories, adjustable ringer, last number redial and mute.
CONTENTS
Location of Controls ..........................................2
Installation .................................................3
Telephone ringer & pitch controls ................................4
Handset cradle ..............................................4
LCD display ................................................4
Setting the clock .............................................5
Making a Call ...............................................5
Line reset ..................................................5
Call timer ..................................................5
Last Number Redial ..........................................5
Mute ......................................................5
Memory Usage ..............................................6
Handset Volume Control .......................................7
Additional Network services ....................................7
Pause .....................................................7
Cleaning ...................................................7
Connection Information ........................................7
REN ......................................................7
Fault Finding ...............................................8
Guarantee ..................................................8
2
LOCATION OF CONTROLS
1Handset 10 Handset retainer
2Mute 11 Follow on call
3Volume control up/down 12 M1/M2/M3 direct memories
4LCD display 13 Programming
5Clock set 14 Indirect memories
6Ringer volume control 15 Call timer/reset button
7 Ringer pitch control 16 Keypad 0-9, *, #
8Recall 17 Last number redial
9Handset curly cord
3
INSTALLATION
Three 1.5V AAA batteries (supplied) are required to power the display and the clock.
When the batteries are low this symbol will appear on the display. It is recommended
that you change the batteries as soon as the symbol appears.
1.Remove the screw from the battery compartment cover on the base of the
telephone.
2.Insert the batteries, observing correct polarity.
3.Replace the battery compartment cover and screw.
4. Plug the telephone line cord and the handset curly cord into their respective sockets
on the base of the telephone.
5.Press both cords into their respective cable channels.
6.Plug the telephone line cord into a telephone socket.
Battery compartment Line cord Handset cord
Do not install in damp or high humidity locations such as bathrooms or garages.
Do not use near water or with wet hands.
Do not install in direct sunlight and disconnect from the line during a thunderstorm.
Note: Always disconnect the telephone from the telephone line when replacing batteries.
If replacement batteries are not inserted within 90 seconds, any stored memories will be
lost.
4
TELEPHONE RINGER & PITCH CONTROLS
The telephone ringer and pitch can be set to individual preferences, using the switches on
the rear of the telephone.
The ringer is denoted by a bell symbol and can be set to either high, low or off where off
is represented by this symbol ..
The ringer pitch also can be set to one of three different levels which are represented by
a note symbol.
Ringer Pitch Control Ringer Volume Control
HANDSET CRADLE
When the handset is lifted from the cradle, the telephone will automatically connect to the
telephone line. To disconnect from the line, replace the handset, a red LED will flash in
the top right hand side of the display.
Always ensure that the handset is located correctly after use, i.e. standing upright in
the handset retaining well.
LCD DISPLAY
The LCD display will show the current time and date (if set), the number dialled and time
the call. Time
Date
Battery low symbol Visual ring
Telephone number indicator
5
TO SET THE CLOCK
1. Press and release the button.
2. Use the or buttons to select the correct hour, then press and release the
button.
3. Use the or buttons to select the correct minutes, then press and release the
button.
4. Use the or buttons to select the correct day/date of the month, then press
and release the button.
5. Use the or buttons to select the correct month of the year, then press and
release the button.
Note: The time/day setting may need resetting after replacing the batteries.
MAKING A CALL
1.Lift the handset.
2.Wait for the dial tone and then dial the telephone number required.
3.To terminate the call, replace the handset.
LINE RESET
If you have made a call and wish to make another call without replacing the handset,
simply press and release the button.
CALL TIMER
Thisfeature allows you to time the length of your calls. When the handset is lifted, the
timer will automatically commence counting. To reset the call timer, during a call, press
and release the button. The counter will be reset to 00-00-00.
LAST NUMBER REDIAL
To redial the number called, lift the handset and press the button.
The number will be dialled automatically.
The number will be retained in memory until another number is dialled.
MUTE
To speak privately to a third party while on a call, press and hold the small button on the
underside of the handset. Release the button when you wish to resume your telephone
conversation.
6
MEMORY USAGE
Thirteen of your most frequently used telephone numbers can be stored in the memory -
three at one touch access (M1/M2/M3 buttons) and ten at two touch access (keypad digits
0-9).
M1/M2/M3 BUTTONS - STORING
1. Press and release the button (the display will show StorE).
2. Enter the telephone number you wish to store.
3. Press the appropriate M1/M2/M3 button (the display will show StorE).
4. Continue to store the other numbers from point 2 above in the other buttons or lift and
replace the handset to terminate the procedure.
If you wish to change any of the stored numbers, repeat the above procedure.
DIALLING
Lift the handset and press the appropriate M1/M2/M3 button. The number will be dialled
automatically.
KEYPAD DIGITS 0-9 - STORING
1.Press and release the button (the display will show StorE).
2. Dial the telephone number you wish to store (maximum 20 digits).
3.Press and release the button.
4.Press and release a keypad digit from 0-9 which will represent the memory storage
location (the display will show StorE).
5.Continue to store the other numbers from point 2 above or lift and replace the
handset to terminate the procedure.
If you wish to change any of the stored numbers, repeat the above procedure.
DIALLING
1.Lift the handset.
2.Press and release the button.
3.Press and release the keypad digit (0-9) which represents the stored number.
The number will be dialled automatically.
7
HANDSET VOLUME CONTROL
The volume of the handset earpiece can be increased or decreased in six different levels
according to personal preference.
To increase, press and release the button
To decrease, press and release the button
ADDITIONAL NETWORK SERVICES
Optional Network services such as call waiting, reminder calls, charge advice, etc., can
be accessed via the Recall (R) button. For further information, contact your Network
Operator.
PAUSE
For some Network services such as home banking or PABX’s which give a secondary
dial tone before further dialling, it may be necessary to insert a pause between digits.
Programme the phone as described in the memory storage section and use the button
to enter a 4 second pause. It is not possible to enter more than three consecutive pauses.
CLEANING
The casing should be cleaned by wiping with a damp cloth. Do not use abrasives or spray
polish that may cause damage.
CONNECTION INFORMATION
The X30 may be connected to public telephone networks in the United Kingdom. It may
be also connected to switching systems that use tone signalling with timed break recall.
If you are in doubt contact your switch supplier.
The apparatus should not be used as an extension to a payphone.
The apparatus should not be connected to a shared service.
Any other usage will invalidate the approval of the apparatus if as a result it ceases to
conform to the standards against which the approval was granted.
REN
The REN number of the X30 is 1. The REN number (Ringer Equivalence Number) is
designated to represent the amount of power that a telephone draws from the telephone
line. Most normal exchange lines have a REN capacity of 4. If you wish to connect any
other equipment to the line, simply add up the REN numbers of each piece and ensure that
the total does not exceed 4. If you exceed 4, one telephone may not ring.
8
FAULT FINDING
In the unlikely event of a fault occurring, proceed as follows:
1. Checkthat telephone is plugged into telephone socket and that all connections are
secure.
2. Check telephone operation in master telephone socket. There may be a fault with the
line in which case contact your Network Operator.
3. Check that total of REN numbers (see page 7) does not exceed 4.
4. If memory numbers are not dialled correctly, re-programme numbers and re-try.
5. If the telephone does not ring, check that the ringer switch on the rear of the phone
is not set to off.
GUARANTEE
The DORO X30 is guaranteed for a period of 12 months from the date of purchase. In the
unlikely event of a fault during this period, please return it with a copy of the purchase
receipt to your retailer.
The guarantee does not extend to damage caused by misuse, negligence, excessive
voltage, faults on the telephone line or lightning.
This guarantee in no way affects your statutory rights.
Indice
Altri manuali Doro Telefono
Doro
Doro 313C Manuale utente
Doro
Doro Primo 215 Manuale utente
Doro
Doro TEL 2 Manuale utente
Doro
Doro MemoryPlus 319ph Manuale utente
Doro
Doro 506 Manuale utente
Doro
Doro AUB 300 Manuale utente
Doro
Doro 720 Manuale utente
Doro
Doro 515C Manuale utente
Doro
Doro PHONE EASY Manuale utente
Doro
Doro AL503 Manuale utente
Doro
Doro 914c Manuale utente
Doro
Doro Kronos Manuale utente
Doro
Doro congress 205 Manuale utente
Doro
Doro airborne 5000 Manuale utente
Doro
Doro HearPlus 317ci Manuale utente
Doro
Doro PhoneEasy 331ph Manuale utente
Doro
Doro CARE Manuale utente
Doro
Doro 5030 Manuale utente
Doro
Doro TEL 8 PLUS Manuale utente
Doro
Doro PhoneEasy 331ph Manuale utente
