- 2 - R20210514
Cautions for safety
Please read cautions for safety carefully before use the product.
Cautions for safety shall be observed because such cautions are to use the product safely and correctly in order to prevent
accident or danger in advance.
- When this product is used for controlling of device which may affect life or property (such as controlling of nuclear power,
medical instrument, vehicle, railroad, aviation, burner, entertainment device or safety device), double safety devices must be
installed before use.
- This product is not explosion proof and should not be used in combustible gas environments or explosion proof areas.
- Do not connect lines or check or repair when power is applied.
- For power connection, verify the terminal number before connection.
- Do not modify product by unauthorized person other than our service technician.
- Do not use this product at outdoor. Product life time may be shortened.
- In wire connection, tighten the terminal screw with sufficient torque.
- Use this product within its rated/performance range. Product life time may be shortened.
- Do not use a load that exceeds the rated switching capacity of the relay contacts.
It may cause insulation failure, contact melting and contact failure.
- Do not use water or organic solvents for cleaning. Use a dry, dry towel.
- Do not use in locations with flammable, explosive gas, direct sunlight, radiant heat, vibration or shock.
- Do not inflow dust or wire dregs into the unit.
- When connecting the sensor, check the polarity of the terminal and connect the wires correctly.
Warranty Information
The warranty statement for the purchaser of the product or license.
Warranty Terms and Conditions Restrictions
Warranty Terms
The warranty period for the product is one year, within which you can receive support for problems with the product itself.
The company shall not be responsible for product damage caused by the following cases:.
- When used without considering the installation instructions and digital input / output rating specified in the product manual.
- When the product has an abnormality caused by external human factors or environmental factors in which
the product is installed.
If a product problem is raised by the original purchaser within the warranty period, we will diagnose the product problem in the buyer's area or
send the product to us for confirmation and support repair and replacement service. If the purchased product exceeds the warranty period or the
product problem is not covered by the support conditions, the original purchaser shall bear the related costs for repair / replacement and delivery.
The original purchaser for any claims, warranties, torts [including negligence and gross negligence] —in any case, with legal requirements
and claims—with or without contract—unless the stated limitations on the fulfillment of the warranty terms do not violate current application
law. Samsung shall not be liable for any consequential damages or losses arising from special, indirect, incidental, legal, or organizational
arrangements for purchased products, including business disruption, loss of use, and revenue problems.
Except for the customer's requirement for non-compliance of warranty terms, we shall not be liable for any claims claimed by the original
purchaser, its associates, agents, or contractors for any loss, damage, or expense incurred or incurred from the sale.
The above warranty conditions are the exclusive rights of the original purchaser. In addition to the warranty terms, the Company rejects the
performance of any other warranty conditions, expressed or implied, including, but not limited to, modification of the product for a particular
purpose, implied warranty conditions on the sale of the product, and warranty conditions without legal infringement.
The fulfillment of warranty conditions does not exactly follow the instructions for the operation and maintenance of the product, and does not
apply to product problems caused by replacement, accident, misuse, abuse, or carelessness. Technical assistance provided by personnel and
agents in the buyer's system design is a suggestion and not a recommendation. The buyer is responsible for determining the implementation of
the proposal and should be tested by the buyer. It is the buyer's responsibility to determine the suitability of the product for its purpose and its
use.
The terms and conditions set forth in the warranty terms apply in effect and the dealer, company or individual or employee has no right to
amend, modify or extend the terms of the warranty for any reason.
