Doufit EB-01 Manuale utente

Instruction Manual

EB-01 Exercise Bike

If the item is damaged or you are missing some parts, please contact [email protected]

with your order number, then we will try our best to solve it for you ASAP.

Catalogue

Page 1

Thanks for purchasing Doufit Eb-0l Exercise Bike and hope you will enjoy it.

Please read the instruction manual carefully before using . And make sure that the

product is complete and free from any damage caused during transportation.

* Be sure to read and follow the safety precautions below.

1. Precautions -----------------------------------------------------------------------------------------

2. Spare Parts Details --------------------------------------------------------------------------------

3. Assembly Method ---------------------------------------------------------------------------------

4. Details Of Monitor --------------------------------------------------------------------------------

5. Usage Method -------------------------------------------------------------------------------------

6. Maintenance And Service ------------------------------------------------------------------------

1. PRECATIONS

WARNING

PLEASE

OBEY

If you feel unwell during using the product, please stop using it immediately

and consult your doctor for instructions before next use.

To ensure your safety, every time before using, please check whether there is

any wear and tear, especially in the seat, screw, knob and safety pin; If there

is, please stop using immediately.

At early period of use, please don’t exceed 30 minutes a day. Follow the

instruction manual to avoid injury caused by improper posture.

Don’t use the product immediately after diet or drinking, you need to wait for

at least 1 hour.

Please place the product on a flat place to avoid falling.

Please wear suitable clothes during exercise.

Before using, please warm up first. Ride lightly, adjust your breath and pace

to slowly get into motion.

When folding, please keep away from children to avoid injury.

The maximum load bearing is 110kg (about 242lbs).

Page 2

Don’t modify or refit the product to avoid any abnormal use or accidents.

CONFIRM

and the knob have been fixed, to avoid accident.

efore using the product, please make sure that the screws, the safety pin

PROHIBIT Prohibit two or more people from using the product at the same time.

This product is just suitable for general household use, not for commercial

use.

Children are prohibited from using the product. For elderly or disable

people, they can only use it under guardianship.

DO NOT

DISASSEMB

Do not use alkaline cleaner, dilute solvent, volatile oil and other solvents

to clean products.

*During using the product, please reserve a safe distance as shown

in the figure.

If the pedal screw come loose, please tighten it before using to avoid pedal

wear or falling.

Page 3

2. SPARE PARTS DETAILS

1. Main frame

7. Right pedal

6. Left pedal

11. Resistance band x 2

4. Seat

8. Handlebar

5. Extension pipe3. Foot pipe x 2

9. Backrest 10. Seat armrest

2. Safety pin

Component

Wheel

Screw Accessories

12. M8*50mm carriage bolt x 4

（Pre-assembled to two foot pipes）

18. Battery x 2

21. M8 lock nut x 2

14. M8 acorn nut x 6

（Four are pre-assembled to

two foot pipes）

13. M8 curved washer x 6

（Four are pre-assembled to two foot pipes)

16. M6*12mm Allen bolt x 4

17. M6 flat washer x 4

15. Knob

19. M8 flat washer x 2 20. M8*45mm

carriage bolt x 2

23. Open-end wrench 24. M5 Allen wrench

22. M8*35mm

Allen bolt x 2

*Attention: There are three M8 lock nuts and three M8 washers under the seat.

Page 4

3. ASSEMBLY METHOD

For the assembly video, please visit:

www.youtube.com/channel/UCorBKk34KZgI96OyGSkjFdA

(page 3) to check if all* Before assembly, please accord to the SPARE PARTS DETAILS

parts are complete. If not, please contact [email protected]. We will send to you ASAP.

Step 1: Unfold the main frame

Step 2: Assemble the foot pipes

Pull the safety pin out from hole B of the main frame.Unfold the main frame to the angle

you prefer, and insert the safety pin into hole A to fix the main frame.

*Warning: If the safety pin placed in hole B, please don’t assemble to avoid accidents.

(Hole B is next to the main frame.)

For this step, please prepare two foot pipes(No.3) and open-end wrench(No.23). There are

four M8*50mm carriage bolts(No.12), four M8 curved washers(No.13), and four M8 acorn

nuts(No.14) on two foot pipes. Please unscrew them before assembly.

Attention: There are two kinds of foot pipes. One foot pipe has two wheels, the other one

doesn’t have wheels. Please assemble the front foot pipe with wheels in front of the main

frame. The wheels face outward.

Insert two M8*50mm carriage bolts from the bottom of each foot pipe, and then screw four

M8 curved washers and four M8 acorn nuts by using the open-end wrench.

312

The wheels face outward.

Page 5

Step 3: Assemble the seat

Step 4: Assemble the pedals

The screw parts we need now are screwed under the seat(No.4). Before assembly, please

unscrew those three lock nuts and washers first. Also you need to prepare the extension

pipe(No.5), knob(No.15), and open-end wrench(No.23). Put the seat cushion on the extension

pipe. Screw these three washer and three lock nuts back. Insert the extension pipe into the

main frame. Adjust the height and twist the knob to fix.

Attention: the letters“L” and “R” and the screwing directions of pedal bolts are indicated in

the stickers on the pedals. The screwing directions of two pedal bolts are different. Attach

the pedals(No.6)(No.7) to the relevant pedal arms. Screw the left bolt anticlockwise and the

right bolt clockwise with the open-end wrench(No.23).

Page 6

Step 5: Assemble the handlebar

Step 6: Assemble the backrest

For this step, please prepare handlebar(No.8), four M6*12mm Allen bolts(No.16), four M6

flat washers(No.17), two batteries(No.18), and M5 Allen wrench(No.24). Two batteries are

in the package of the instruction manual.

Attach the handlebar to the front of frame. Screw fours M6*12mm Allen bolts and four M6

flat washers by using the M5 Allen wrench. Lastly, connect two cables between the monitor

and the main frame. Please don’t forget to install two batteries.

connect

For this step, please prepare the backrest(No.9), two M8 flat washers(No.19), two M8*45mm

carriage bolts(No.20), two M8 lock nuts(No.21), open-end wrench(No.23), and M5 Allen

wrench(No.24).

Attach the backrest under the seat. Insert two M8*45mm carriage bolts.

Screw two M8 flat washers and two M8 lock nuts by using the open-end wrench.

Page 7

Step 7: Assemble the seat armrest

Step 8: Assemble the resistance bands

For this step, please prepare the seat armrest(No.10), two M8 curved washers(No.13), two

M8 acorn nuts(No.14), two M8*35mm Allen bolts(No.22), open-end wrench(No.23), and

M5 Allen wrench(No.24).

Attach the seat armrest to the backrest. Screw two M8*35mm Allen bolts, two M8 curved

washers, and two M8 acorn nuts by using two wrenches.

Connect two resistance bands(No.11) to the rear foot pipe.

Page 8

4. DETAILS OF MONITOR

Parameters

Button functions

TIME (TMR ) 00:00- 99:59

SPEED (SPD) 0.0- 99.9ML /H

CALORIES (CAL) 0.0- 999.9KCAL

DISTANCE (DIS) 0.00- 99.99ML

ODOMETER (ODO ) 0-9999ML

PULSE (P) 40-240BPM

The round button is used to turn on, select function and clear all data except odometer.

Operation guidance

Turn on/off

The monitor will automatically turn on when you start to exercise, and you can also turn on it

manually by pressing the button. The mnitor will automatically turn off after a while when

you stop exercise. If there is no data showing, please check if the wire has connected, or

change the batteries. (The battery model is AAA.)

Reset

If you long press the button over 3 seconds, all data will be reset except odometer. If you

re-install the battery, all data will be reset.

Scan

When “SCAN” in the lower left corner of the screen flashes, the data will switch automatically

one by one; And you also can scan each data by pressing the button.

Page 9

5. USAGE METHOD

Adjust the height of bike seat

Unscrew the knob (No15) to adjust the height of seat according to your height, then screw

the knob back after you finish the adjustment.

Adjust the resistance of bike pedals

To adjust the resistance of pedals, please rotate the resistance adjustment button on the

frame. There are 8 gears of resistance in total, and the 8th level is the maximum resistance.

Clockwise rotation will increase resistance; On the contrary, anticlockwise rotation will

reduce resistance.

Folding storage

Pull the safety pin out from hole A to start folding. After folding, insert the safety pin into

hole B to fix the exercise bike. And then place it horizontally to avoid accident cause by

collision.

Indice

Altri manuali Doufit Cyclette

Doufit

Doufit EB-06 Manuale utente

Manuali Cyclette popolari di altre marche

Weslo

Weslo Vector 302 Guida rapida

TOORX

TOORX BRX85 Manuale utente

Matrix

Matrix KranKcycle Manuale utente

Matrix

Matrix IC3 Manuale utente

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manuale utente

Monark

Monark 827E Manuale utente

Stamina

Stamina 1310 Manuale utente

American Fitness

American Fitness SPR-BK1072A Manuale utente

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manuale utente

BH FITNESS

BH FITNESS H9158H Manuale dell'operatore

Body Sculpture

Body Sculpture BC-7220G Manuale utente

Cateye

Cateye EC-2300 Manuale utente

FYTTER

FYTTER RACER RC MSR Manuale utente

Kikos

Kikos HM-9090M Manuale utente

Pro-Form

Pro-Form 345 Zlx Bike Guida utente

Fuel Fitness

Fuel Fitness SU135-40 Manuale utente

NordicTrack

NordicTrack Gxr 4.2 Bike Manuale utente

Vision Fitness

Vision Fitness U70 Manuale utente