Drive ST3 Manuale utente
www.drivemedical.co.uk
ST3
User Manual
Instruction BookletST-3
TABLE OF CONTENTS
INTRODUCTION
IMPORTANT PRECAUTIONS
ELECTROMAGNETIC INTERFERENCE
AND WARNINGS
IDENTIFICATION OF PARTS
OPERATING YOUR SCOOTER
DISASSEMBLING YOUR SCOOTER
RE-ASSEMBLING YOUR SCOOTER
CHARGING THE BATTERIES
CARE AND MAINTENANCE
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
---------------------------------------------------------1
-----------------------------------------2
---------------------------------------------------------3
------------------------------------------6
---------------------------------------9
-------------------------------12
-------------------------------14
----------------------------------------15
------------------------------------------17
-------------------------------------------------18
-------------------------------------20
ISSUE 1
Instruction Booklet
Information of European Representative :
EMERGO EUROPE
Molenstraat 15
2513 BH, The Hague
The Netherlands
ST-3
Thank you and congratulation on purchasing your new Drive Medical Ltd. Mobility
Scooter. It is designed to provide you with transportation ability indoors and outdoors.
We pride ourselves on providing safe and comfortable products. Our goal is to ensure
your complete satisfaction. We sincerely hope you enjoy your new Mobility Scooter.
Please read and observe all warning and instruction provided in owner's manual before
you operate with various convenient function of this scooter. Also, please retain this booklet
for future reference.
If you have any question, you can contact :
or your local dealer:
INTRODUCTION
1
ISSUE 1
Instruction BookletST-3
IMPORTANT PRECAUTIONS
2
•This scooter is designed for single person use only at any one time.
•Maximum user weight is 130 kg / 287 lbs.
•Turn key off before getting on or off.
•Always drive carefully and be aware of others using the same area.
•Always use pedestrian crossings wherever possible. Take extreme care when crossing
roads.
•
Do not drive on slope exceeding 8 degree, and take extreme care when turning on slope.
•Do not use full power when turning to sharp corner.
•Take great care and drive in low speed when backing up, riding downhill or on uneven
surface, and climbing curb.
•Please use the lowest speed when driving through the descending road or uneven terrain.
If speed is too fast, leave your hand off the handle bar, let the scooter stop. Make sure
safety and start again.
•A slow speed must always be used when ascending, descending or traversing aslope
or incline and also on uneven terrain, ramps and soft or loose surfaces, such as gravel
or grass.
•To prevent any danger, do not turn around at high speed on ascending, descending ramp.
•Scooter may not operate well in high humidity.
•Do not leave the powered scooter in a rain storm of any kind.
•Do not use the powered scooter in a shower.
•Direct exposure to rain or dampness will cause the scooter to malfunction electrically
and mechanically; may cause the powered scooter to prematurely rust.
•Never put scooter in neutral when staying on slopes.
•Follow traffic laws when riding outside.
•When scooter on moving transport vehicles, do not sit or stay on scooter.
ISSUE 1
Instruction BookletST-3
Powered wheelchairs and motorized scooters may be susceptible to electromagnetic
interference (EMI), which is interfering electromagnetic energy (EM) emitted from sources
such a radio stations, TV stations, amateur radio (HAM) transmitters, two-way radios,
and cellular phones. The interference (from radio wave sources) can cause the motorized
scooter to release its brakes, move by itself, or move in unintended directions. It can also
permanently damage the motorized scooter control system. The intensity of the interfering
EM energy can be measured in volts per meter (V/m). Each motorized scooter can resist
EMI up to certain intensity. This is called its "immunity level." The higher the immunity
level, the greater the protection. At this time, current technology is capable of achieving
at least a 20 V/m immunity level, which would provide useful protection from the more
common sources of radiated EMI. This immunity level of this motorized scooter model
is 20 V/m.
There are a number of sources of relatively intense electromagnetic fields in the everyday
environment. Some of these sources are obvious and easy to avoid. Others are not
apparent and exposure is unavoidable. However, we believe that by following the warnings
listed below, your risk to EMI will be minimized.
1.Hand-held portable transceivers (transmitters-receivers) with the antenna mounted
directly on the transmitting unit. Examples include: citizens band (CB) radios, "walkie
talkie," security, fire, and police transceivers, cellular telephones, and other personal
communication devices;
2.Medium-range mobile transceivers, such as those used in police cars, fire trucks,
ambulances, and taxis. These usually have the antenna mounted on the outside of
the vehicle; and
CAUTION: It is very important that you read this information regarding the possible
effects of Electromagnetic Interference on your motorized scooter.
Some cellular telephones and similar devices transmit signals while they
are ON, even when not being used.
The sources of radiated EMI can be broadly classified into three types：
ELECTROMAGNETIC INTERFERENCE
AND WARNINGS
3
ISSUE 1
Instruction BookletST-3
4
3.Long-range transmitters and transceivers such as commercial broadcast transmitters
(radio and TV broadcast antenna towers) and amateur (HAM) radios.
Because EM energy rapidly becomes more intense as one move closer to the transmitting
antenna (source), the EM fields from hand-held radio wave sources (transceivers) are of
special concern. It is possible to unintentionally bring high levels of EM energy very close
to the motorized scooter control system while using these devices. This can affect motorized
scooter movement and braking. Therefore, the warnings listed below are recommended to
prevent possible interference with the control system of the motorized scooter.
Other types of hand-held devices, such as cordless phones, laptop
computers, AM/FM radios, TV sets, CD players, and cassette players,
and small appliances, such as electric shavers and hair dryers, so far
as we know, are not likely to cause EMI problems to your motorized
scooter.
Motorized Scooter Electromagnetic Interference：
Electromagnetic interference (EMI) from sources such as radio and TV stations, amateur
radio (HAM) transmitters, two-way radios, and cellular phones can affect motorized scooters.
Following the warnings listed below should reduce the chance of unintended brake release
or motorized scooter movement which could result in serious injury.
1.Do not operate hand-held transceivers (transmitters-receivers), such as citizens band
(CB) radios, or turn ON personal communication devices, such as cellular phones, while
the motorized scooter is turned ON;
2.Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming
close to them;
3.If unintended movement or brake release occurs, turn the motorized scooter OFF as
soon as it is safe;
Warnings：
ISSUE 1
Instruction BookletST-3
5
4.Be aware that adding accessories or components, or modifying the motorized scooter,
may make it more susceptible to EMI; and
5.Report all incidents of unintended movement or brake release to the distributor listed
on the inside front cover of this manual. Note whether there is a source of EMI nearby.
1.20 volts per meter (V/m) is a generally achievable and useful immunity level against
EMI (as of May 1994). The higher the level, the greater the protection.
2.The immunity level of this product is 20 V/m.
There is no easy way to evaluate their effect on the overall immunity
of the motorized scooter.
Important Information：
ISSUE 1
Instruction BookletST-3
Free-Wheeling
Lever
Anti-Tip Wheels
Release
Lever
Thumb Lever
Self-Diagnostic Warning Light
Speed Dial Knob
Horn Button Battery Gauge
Main Key Switch
Figure 2 - ST-3 Top Control Panel Figure 3 - ST-3 Back View
IDENTIFICATION OF PARTS
6
Before attempting to drive this scooter on your own, it is important that you familiarize
yourself with the controls, and how to operate them.
Figure 1 - ST-3 Front View
Padded
Foldable Seat
Seat Rotation
Lever
Seat
Lock Knob
Release Lever
Front Basket
Armrest Width
Adjustment
Thumbscrews
Puncture
Proof TyresTiller Angle Adjustment
Circuit
Breaker
Flip Up Armrest
ISSUE 1
Instruction BookletST-3
Function Of Parts：
7
TOP CONTROL PANEL
•Speed Dial Knob
The image of rabbit means fast or high speed. The image of turtle means slow or low
speed. By turning this knob towards chosen image you can control overall speed of the
vehicle.
•Self Diagnostic Warning Light
Flashing light indicates there is a problem within scooter. See page 18 for more
information.
•Battery Gauge
The meter gives an approximation of battery strength. Green indicates a fully charged
battery. Without any Green light means no power, required to charge batteries immediately.
ADJACENT TO TOP CONTROL PANEL
•Thumb Lever
Pushing right thumb lever forward moves scooter forward. Pushing left thumb lever
forward will move scooter backward. (This configuration can be reversed if required
by local authorized dealer.) While in use this lever is also your accelerator. The further
you depress the thumb lever, the faster you will go. (NOTE: subject to the position of
the rabbit/turtle control). Releasing the thumb lever engages the automatic brake.
AT BASE OF TILLER
•Tiller Angle Adjustment
Rotate the Hand Wheel Tiller Angle Adjustment to adjust your most comfortable angle.
BELOW SEAT
•Seat Lock Knob
There are three holes on seat post to adjust seat height. Be sure detent pin is fully
inserted at its new height and bolt is tightened.
•Seat Rotation Lever
Lift lever to rotate seat. Please be careful when getting on or off scooter with seat in a
swiveled position. The stability of seat may be compromised.
ISSUE 1
Instruction BookletST-3
•Armrest Width Adjustment Thumbscrews
Loosen two thumbscrews to adjust arm width; tighten again to lock in desired position.
REAR BODY
•Anti-Tip Wheels
Added safety feature to keep scooter from tipping over.
•Free-Wheel Lever
The scooter carn be pushed manually. To do this you must push the free wheel lever
upward to the N position. pull free wheel lever to D to engage brake system.
8
ISSUE 1
Indice
Altri manuali Drive Scooter
Drive
Drive Spitfire EX 1320 Manuale utente
Drive
Drive Stingray Manuale utente
Drive
Drive Odyssey LX Manuale utente
Drive
Drive Royale Guida utente
Drive
Drive Phoenix HD Manuale dell'operatore
Drive
Drive Scout Manuale utente
Drive
Drive PHOENIXHD3 Manuale utente
Drive
Drive Spitfire Scout Manuale utente
Drive
Drive Bobcat X3 Manuale utente
Drive
Drive KING COBRA Guida utente
Drive
Drive Ventura 4 Manuale utente
Drive
Drive ST1 Manuale utente
Drive
Drive Spitfire Scout Manuale utente
Drive
Drive PHOENIX HD 3 Manuale utente
Drive
Drive Viper Manuale utente
Drive
Drive Maverick Manuale utente
Drive
Drive EASY RIDER Manuale utente
Drive
Drive ST5D Manuale utente
Drive
Drive VENTURA Manuale utente
Drive
Drive Ambassador Guida utente
