DRS DRS-M210-V2 Manuale utente

Parachute Manual DRS-M210-V2

Version 1.0

Drone Rescue Systems GmbH

Austria –Stremayrgasse 16/4

8010 Graz

www.dronerescue.com

Parachute Manual DRS-M210-V2 
©2020 Drone Rescue Systems 2/27 
1Contents 
2DISCLAIMER............................................................................................................ 3 
3Introduction............................................................................................................ 4 
4Components ............................................................................................................ 5 
5Installation ..............................................................................................................7 
 Install the mounting plate..........................................................................................7 
 Install the M210 –Connector.................................................................................... 8 
 Mount the cords ........................................................................................................... 9 
 Configure the M210-V2 ..............................................................................................12 
5.4.1 Configure Onboard SDK in DJI Assistant Application ................................12 
5.4.2 Configure PWM signal in DJI Pilot App ..........................................................13 
5.4.3 Onboard SDK activation.....................................................................................15 
 DRS Configuration ......................................................................................................15 
 Assembly test...............................................................................................................15 
6Flight ......................................................................................................................17 
 Pre-Flight Inspection.................................................................................................17 
 Loading and unloading the parachute.................................................................. 18 
 Takeoff ...........................................................................................................................22 
 After flight.....................................................................................................................22 
7Device.................................................................................................................... 23 
 Device states and signals ........................................................................................ 23 
 Device Configuration................................................................................................. 23 
 System Time ................................................................................................................ 25 
 Firmware Update........................................................................................................ 26 
8Specifications ....................................................................................................... 26 
 Operational and environmental conditions ........................................................ 26 
 Approved payloads .................................................................................................... 26 
9Storage...................................................................................................................27 
10 Maintenance ..........................................................................................................27 
 
 

Parachute Manual DRS-M210-V2

2DISCLAIMER

The information contained in this document is confidential, privileged and only for

the information of the intended recipient and may not be used, published or

redistributed without the prior written consent of Drone Rescue Systems GmbH.

The opinions expressed are in good faith and while every care has been taken in

preparing these documents, Drone Rescue Systems GmbH makes no

representations and gives no warranties of whatever nature in respect of these

documents, including but not limited to the accuracy or completeness of any

information, facts and/or opinions contained therein.

Drone Rescue Systems GmbH, its subsidiaries, the directors, employees and agents

cannot be held liable for the use of and reliance of the opinions, estimates, forecasts

and findings in these documents.

We recommend that you do not fly prior to purchasing liability insurance. This helps

cover costs in the event that persons are hurt or property is damaged as a result of

your use of DRONE RESCUE technology. In general, RC aircrafts are not covered by

standard liability insurance.

Your safety is your own responsibility, including proper use of equipment and safety

gear, and determining whether you have adequate skill and experience. Our

products may be dangerous, unless used properly and with adequate precautions,

including safety gear. Our products are not intended for use by hobbyists or

nonprofessional users.

Warranty will be terminated if parachute is re-packed by yourself.

Parachute Manual DRS-M210-V2

3Introduction

The DRS-M210-V2 is an autonomous parachute solution for the DJI M210-V2 (UAV),

providing the following advantages

•Very light-weighted, because we are not using a pyrotechnical, spring or

servo-approach to eject the parachute, but a very light-weighted

internationally patented catapult mechanism

•Completely autonomous due to own developed and from the flight controller

independent electronics

•Easy to reuse within minutes

•LED + acoustical indication signal before take-off and when the parachute

gets deployed

•No explosive component to deploy the parachute

•Simply to attach and detach due to a bayonet mechanism

This document will guide you through the system components, installation,

configuration and pre-flight checks as well as possible firmware updates, storage

and maintenance recommendations.

Parachute Manual DRS-M210-V2

4Components

Table 1 lists all systems components. Within the document parts are linked by their

short ID e.g. Container for the carbon container.

Short ID

Picture*

Quantity

Description

Container

Carbon container of the DRS System

Container Lid

Lid of the Container.

Parachute

Parachute (wrapped in a plastic cover

secured by some rubber bands)

Parachute

cord

Parachute cord of the Container.

Hook and

loop fastener

Hook and loop fastener

Container

cord

Container safety cord (with buckle).

Hook

Brummel hook

Parachute Manual DRS-M210-V2

Short ID

Picture*

Quantity

Description

Hook

protection

sleeve

Protection sleeve for the brummel hook

Cord box

Cord box lid

Lid of the cord box, including a small

rubber stopper in the center.

Mounting

plate

DRS Mounting plate

DRS M210

Connector

DRS M210 Connector

Screw

M2.5x16mm DIN 912

(cylinder head screw, hexagon socket)

Spacer

Table 1 System components

*Depending on the actual DRS configuration the component pictures in Table 1 may

slightly differ from your system.

Parachute Manual DRS-M210-V2

5Installation

Unmount all propellors and detach all batteries and other power supplies before

starting the installation!

Mounted propellors may cause any injuries or damages.

It is mandatory to verify the correct operation with an assembly test right

after the installation! See chapter 5.6 Assembly test for details.

Install the mounting plate

The Mounting plate will be mounted on the top of the UAV. Therefore, take four

Spacers and place each one on one upward Gimbal mounting position. Put the

Mounting plate on the Spacers and fixate it with the Screws as shown in pictures

below.

Upward Gimbal

Mounting Position

Parachute Manual DRS-M210-V2

Install the M210 –Connector

Remove the two screws and the standard cover in the rear of the UAV.

Plug in the DRS M210 Connector instead.

Connect the other side of the DRS M210 Connector to the white socket on the bottom

side of the Mounting plate as shown below.

Original IP rating of the UAV is no longer valid!

Screws standard cover

Parachute Manual DRS-M210-V2

Mount the cords

Make sure the drone is in a stable

upside position. Select one of the

front arms of the UAV. Mount one

Parachute cord to the arm and pull it

around close to the hinge. Thread one

end of the cord through the other

end’s loop. Repeat the steps on the

other front arm and tighten the

Parachute cords well.

Mount the Container cord similar to

the Parachute cords on to the left arm

of the UAV rear side and tighten it

well.

Put the Hook and loop fastener over

each Parachute cord and the

Container cord.

Parachute Manual DRS-M210-V2

Now fasten the Hook and loop fastener.

Take both Parachute cords and thread

the ends through the central hole in the

Cord box lid. Then push the lid

downwards.

Thread the open ends of both Parachute

cords through the Hook’s small hole

without opening.

Push the Parachute cords far enough

through the hole to wrap the loops over

the Hook. Push the Cord box lid up till

the end.

Indice

Altri manuali DRS Accessori per droni e quadricotteri

DRS

DRS DRS-M600 Manuale utente

Manuali Accessori per droni e quadricotteri popolari di altre marche

A2Z Drone Delivery

A2Z Drone Delivery RDS2 Manuale utente

ParaZero

ParaZero SafeAir Mavic Manuale utente

JT SS125 Manuale utente

dji

dji Zenmuse X9 Manuale utente

dji

dji Goggles Manuale utente

dji

dji E7000 Manuale utente

RunCam

RunCam Phoenix HD Manuale utente

Kogan

Kogan 4K GALAXY Manuale utente

Opale Parachutes

Opale Parachutes SAFETECH 3.2K ST60 Manuale utente

Flycolor

Flycolor X-Cross Mini 4in1 Manuale utente

ParaZero

ParaZero SafeAir Phantom Manuale utente

dji

dji PHANTOM 2 VISION PLUS Manuale utente

HOBBYEAGLE

HOBBYEAGLE A3 Mini Manuale utente

dji

dji AGRAS T50 Manuale utente

TCMM RC

TCMM RC AC 220 Manuale utente

iKarus

iKarus Profi Gyro Manuale utente

R2TECK

R2TECK NEXG1 Manuale utente

Hesai

Hesai Pandar40P Manuale utente