DT Research 316T Istruzioni per il montaggio

Mobile Tablet

Caution:

Disposal of a battery into fire or a hot oven, or mechanically

crushing or cutting of a battery, that can result in an explosion.

Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of flammable。

316T

INTRODUCTION

Thank you for acquiring the 316T, part of DT Research’s line of Mobile Tablet.

Featuring a slim, robust enclosure, the 316T with a 15.6” TFT display is poweredby the

Intel® processor, oﬀering optimal combinations of performance and power savings.

The 316T is available with Microsoft® Windows® or Ubuntu operating system.Each

software operating system features web browser, client/ server computing software,

media player, accessories, and applications support.

PACKAGE CONTENTS

•One 316T with Battery Pack and HandstrapF

•AC-DC Power Adapter with Power Cord

•Basic Operation Guide

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

BOG120921 316T C ENG

Power/Battery LED Status:

•Blue indicates the battery is 25% to 100% charged

•Blinking blue indicates the battery is charging

•Orange indicates that the battery is between 11% to 25%

•Blinking Orange indicates that the battery is below 10%

PRECAUTIONS

•Always exercise care when operating and handling the 316T.

•Do NOT apply excessive pressure to the display screen.

•We recommend using the Digital Pen (optional) to keep the screen clean.

•Avoid prolonged exposure of the display panel to any strong heat source.

Wherever possible, the 316T should face away from direct light to reduceglare.

•If the AC-DC power adapter is used to recharge or power the tablet, do NOT use

any AC-DC adapter other than the one provided or acquired from the manufac-

turer or its partners.

•In the unlikely event that smoke, abnormal noise, or strange odor is present,

immediately power oﬀ the 316T and disconnect all power sources. Reportthe

problem to your device provider immediately.

•Never attempt to disassemble the 316T, as this will void the warranty.

Input/ Output Ports

Button Functions

BASIC FEATURES

The 316T wireless tablet integrates a bright and multi-touch display, one USB port,

and embedded networking elements such as wireless LAN and Bluetooth. The316T is

complemented by a suite of accessories, including battery expansion, charging cradles,

and battery charger kit, for a comprehensive user experience.

A 316T typically integrates an 802.11ax wireless LAN (WLAN) adapter that mayconnect

to other wireless devices or access points. If your 316T does not comewith such a

network adapter, please consult your device provider to establish the desired

network connectivity.

BHeadphone-out

CEthernet Port

A USB 3.0 Port

E DC-in

Battery/Power LED

2 E

BUTTON

ACTION

ProgrammableButton

Power Button

Battery Latch

OPERATION

Powering ON and OFF

To activate the 316T, push and quickly release the Power Button. The display will

come on in a few seconds. To put the 316T in Standby mode, push and quickly

release the Power Button. To turn the 316T oﬀ for extended storage, power

oﬀ safely using any software function that “shuts down computer” provided in the

software operating system.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The 316T may be configured using the utilities and methods dictated by the

software operating system. The 316T should be configurable for various

properties such as user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN

The 316T is often delivered with an embedded (user-inaccessible) 802.11ax

WLAN adapter equipped with a hidden custom antenna.

•Through the support of typical WLAN adapters, the 316T should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connection.

•The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 316T and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for

secure access.

•When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•Refer to the access point operating manuals for setting up the 802.11 access

points.

Bluetooth

The 316T oﬀers the Bluetooth module which supports Bluetooth 5.0 standardincluding

Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which delivers faster speeds

with low power consumption.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in “Standby” mode while not in use. Pushing briefly on the same button

will wake up the system within seconds.

NOTE:

When the batterypack is charging, the blue-colored Battery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack may have been drained substantially.

Try unplugging/ replugging the AC-DC adapter to the 316T a few times to

activate the charging process.

NOTE:

The battery packs shipped with your tablet may be low in power—please use

the AC-DC adapter with the 316T when setting up for the first time to fully

charge the internal battery pack. You may charge the external battery pack with

it attached to the 316T, or with the optional external battery charger kit.

NOTE:

Avoid using the Power Button (“hold 4+ seconds” feature) to turn oﬀ the tablet—

this form of hardware shutdown is intended to be a means of recoveryfrom

lockups, and not as normal operation.

USING THE MOBILE TABLET

Peripherals Support

Through its USB port, the 316T supports a wide range of USB-based peripherals.These

peripherals are applicable for software installation, applications storage, datastorage,

and system software recovery and updates.

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT

Research website.

The equipment is only suitable for mounting at heights ≤ 2 m.

The band 5150-5350 MHz for this device are restricted to indoor use only.

RF Exposure Compliance

This device was tested for typical body-worn operations. To comply with RF exposure requirements,

a minimum separation distance of 0mm must be maintained between the user’s body and the handset,

including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should

not contain any metallic components. Body-worn accessories that do not meet these requirements may

not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved

antenna.

Cet appareil a été testé pour des opérations typiques portées sur le corps. Pour se conformer aux

exigences d'exposition RF, une distance de séparation minimale de 0 mm doit être mainten ue entre

le corps de l'utilisateur et le combiné, y compris l'antenne. Les clips de ceinture, les étuis et les

accessoires similaires tiers utilisés par cet appareil doiventne contiennent aucun composant

métallique. Les accessoires portés sur le corps qui ne répondent pas à ces exigences peuvent ne

sont pas conformes aux exigences d'exposition RF et doivent être évitées. Utilisez uniquement le

produit fourni ou approuvé antenne.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identifier Trade Name:

Model No.: 316T

Responsible Party –U.S. Contact Information

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

http://www.dtresearch.com

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct the interference by one of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit diﬀerent from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in

conjunction with any other antenna or transmitter.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

IC Compliance Statement

- English:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.

- French:

Le present appareilest conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne

doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RF Exposure Information (RED)

To be protected against all verified adverse effects, the separation distance of at least 0m must be maintained between the antenna of the radio having max. 4.1dBi antenna and all persons.

Hereby, [DT Research, Inc.] declares that the radio equipment type [316T] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following

internet address: http://www.dtresearch.com.

Maximum EIRP for EU

Bluetooth:2402MHz-2480MHz

10.44dBm

Bluetooth LE:2402MHz-2480MHz

7.09dBm

Wifi: 2412MHz-2472MHz/2422MHz-

2462MHz

18.49dBm

Wifi: 5150MHz-5725MHz

19.05dBm

Wifi: 5725MHz-5875MHz

13.92dBm

Indice

Altri manuali DT Research Tavoletta

DT Research

DT Research DT311Y Istruzioni per il montaggio

DT Research

DT Research DT372i Istruzioni per il montaggio

DT Research

DT Research DT362 Istruzioni per il montaggio

DT Research

DT Research 311Q Istruzioni per il montaggio

DT Research

DT Research DT381RP Istruzioni per il montaggio

DT Research

DT Research DT301Q Istruzioni per il montaggio

DT Research

DT Research DT390MD Istruzioni per il montaggio

DT Research

DT Research WebDT 312 Manuale utente

DT Research

DT Research DT313C Istruzioni per il montaggio

DT Research

DT Research 301MD Istruzioni per il montaggio

DT Research

DT Research DT365 Istruzioni per il montaggio

DT Research

DT Research DT370CR Istruzioni per il montaggio

DT Research

DT Research DT301Y Istruzioni per il montaggio

DT Research

DT Research DT370CR Istruzioni per il montaggio

DT Research

DT Research DT307SQ Istruzioni per il montaggio

DT Research

DT Research DT313YR Istruzioni per il montaggio

DT Research

DT Research DT390i Istruzioni per il montaggio

DT Research

DT Research WebDT 310 Istruzioni per il montaggio

DT Research

DT Research DT382GL Istruzioni per il montaggio

DT Research

DT Research DT311Y Istruzioni per il montaggio

DT Research

DT Research DT300Q11 Istruzioni per il montaggio

DT Research

DT Research DT317BT Istruzioni per il montaggio

DT Research

DT Research DT311YR Istruzioni per il montaggio

DT Research

DT Research 302MD Istruzioni per il montaggio

Manuali Tavoletta popolari di altre marche

Laser

Laser MID-1060 Guida utente

MUNBYN

MUNBYN IRT09J Guida rapida

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Manuale utente

Dell

Dell Latitude ST Manuale del proprietario

Lenovo

Lenovo IdeaTab S6000L Manuale del proprietario

Venturer

Venturer WT9L11 Manuale utente

EDUGEAR

EDUGEAR UnoBook Manuale utente

Philips

Philips PI3210G/58 Manuale utente

ADLINK Technology

ADLINK Technology IMT-BT Manuale utente

TwinMOS

TwinMOS TwinTAB-T102D1 Manuale utente

Archos

Archos 9.7 xenon Manuale utente

Getac

Getac E100 Manuale utente

HANNspree

HANNspree HANNspad SN70T3 Manuale utente

Philips

Philips PI3105W2/55 Manuale utente

LG LG-V935 Manuale utente

Zeki

Zeki TBDB763B Manuale utente

Ricoh

Ricoh eQuill Manuale utente

MaxWest

MaxWest Nitro Phablet 9 Manuale utente