Duali DQ-MINI Manuale utente

DQ-MINI

User Manual

copy, disclose, distribute, or use this document in part or as a whole for any

purposes other than those for which this document is disclosed. This document is

copyrighted and contains confidential information and other intellectual property

rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution

constitutes infringement of DUALi’s intellectual property rights.

DUALi Inc.

Document Version: 1.00

Last Revised Date: 20th. SEP 2018

Release Date: 25 November 2009

DQ-MINI User Manual, Version: 1.00

www.duali.com 2

Revision History

2018.09.20 (Ver. 1.00) : First Release

DQ-MINI User Manual, Version: 1.00

www.duali.com 3

DUALi Inc. reserves the right to make changes to its applications or services or to

discontinue any application or service at any time without notice. DUALi provides customer

assistance in various technical areas, but does not have full access to data concerning the

use and applications of customer's products.

Therefore, DUALi assumes no liability and is not responsible for customer applications or

software design or performance relating to systems or applications incorporating DUALi

products. In addition, DUALi assumes no liability and is not responsible for infringement of

patents and/or any other intellectual or industrial property rights of third parties, which may

result from assistance provided by DUALi.

Composition of the information in this manual has been done to the best of our knowledge.

DUALi does not guarantee the correctness and completeness of the details given in this

manual and may not be held liable for damages ensuing from incorrect or incomplete

information. Since, despite all our efforts, errors may not be completely avoided, we are

always grateful for your useful tips.

We have our development center in South Korea to provide technical support. For any

technical assistance can contact our technical support team as below;

Tel: +82 31 213 0074

e-mail : [email protected]

FeliCa™ is registered trademark of SONY Corporation.

Mifare®is registered trademarks of NXP Semiconductors

DQ-MINI User Manual, Version: 1.00

www.duali.com 4

CONTENTS

01. Introduction...............................................................................................................5

02. Specification..............................................................................................................5

03. Contents Confirmation..............................................................................................6

04. Appearance & Installation.........................................................................................7

04.1 DQ MINI Feature & Dimension...............................................................................7

04.2 Mounting DQ Mini on the wall ...............................................................................7

05. Connection Diagram .................................................................................................9

06. Operation & Usage..................................................................................................10

07. Output Format .........................................................................................................10

08. Function configuration (Communication setting).................................................12

08.1 Wiegand option set (Parity, Reverse) .................................................................13

08.2 LED option setting ...............................................................................................14

08.3 Mifare KEY type, Block number, ID position, Wiegand format option set........14

08.4 QR Mode option set .............................................................................................16

08.5 QR Reading timeout.............................................................................................17

08.6 QR scan interval set.............................................................................................18

08.7 QR Maximum length set ......................................................................................19

08.8 QR data send channel set....................................................................................20

08.9 RF Scan option set...............................................................................................21

09. Certifications ...........................................................................................................22

10. Warranty & Service .................................................................................................23

DQ-MINI User Manual, Version: 1.00

www.duali.com 5

01. Introduction

DQ-MINI is a wiegand access control reader based on 13.56 Mhz contactless card

communication technology with stylish and rugged design. And it also can read QR code and

1D/2D barcode. The ideal combination of NFC & QR reader could upgrade your application into

another level. The reader is designed for wall mounting type of Access / Time attendance &

parking management systems, and etc.

02. Specification

Communication Interface

Wiegand - 32 / 34 /56/ 58/ 64/ 66 bit

RS-232 –115200bps

RS-485 –115200bps

Operating Frequency

13.56MHz

Credential Type

Contactless

> ISO 14443 TYPE A and B

> Mifare™

> FeliCa®

> ISO 15693

> ISO 18092 (NFC)

[Option]

Contact (SAM)

> ISO7816 Class A (5V)

2 SAM Card Slot

1D/2D QR

Recognizable spec

UPC/EAN, UPC/EAn with Supplementals, Bookland

EAN, ISSN, UCC Coupon Extended Code, Code128,

GS1-128, ISBT 128, Code 39, PDF417,

MicroPDF417, Composite Codes, Data Matrix,

Maxicode, Qr Code, micro QR, Aztec

Indicator

LED (RED /BLUE)

Magnetic Buzzer

Power Supply

12VDC (9- 12 VDC also available)

Linear supply recommended, 150 mA @ 12 VDC

Operating Condition

> -4ºto 158ºF (-20ºto 70ºC guaranteed)

> 5% to 90% relative humidity

Storage Condition

> -4ºto 158ºF (-20ºto 80ºC) >

> 5% to 90% relative humidity

Housing Material

PC (polycarbonate)

Dimensions

99.3(mm) x 91.9(mm) x 88.4(mm)

Weight

169.6g

Cable length

1000(mm)

Certifications

FCC Certification (US), CE(EU), IP65 compliant

DQ-MINI User Manual, Version: 1.00

www.duali.com 6

03. Contents Confirmation

< DQ Mini with Wiegand or USB cable > < Wall bracket > <Screw>

PC Test/FW download zig

DQ-MINI User Manual, Version: 1.00

www.duali.com 7

04. Appearance & Installation

04.1 DQ MINI Feature & Dimension

04.2 Mounting DQ Mini on the wall

LED Indicator

Place the provided wall mount bracket on

the wall and fix it tightly with screw

(Φ4mm Flat head)

Connect the power and communication

cable to DQ MINI’s terminal block.

In case you don’t use the cable as it is

shipped, you could cut off the end of

the cable and use only the wire that

you need for connection.

RF Field

1/2D barcode

detector

DQ-MINI User Manual, Version: 1.00

www.duali.com 8



< Side View>

Tilt the device slightly and insert to the wall mount from the top as above step. Fix it

tightly with 3*4 flat head machine screw.

※Caution

- Do not push the bracket too hard when fixing it to the wall.

- Screw has to be selected depending on the wall’s material and condition

- Place the reader to flat panel between the wall mount bracket and the wall.

It could cause a problem to assemble the device if the bracket is bent.

- Card reading distance can be short if the wall is made of steel or metal.

DQ-MINI User Manual, Version: 1.00

www.duali.com 9

05. Connection Diagram

PIN NAME

COLOR

PIN NUMBER

PWR_IN

RED

PWR_GND

BLACK

RS232_RX

GRAY

RS232_TX

PINK or JADE

WGD_D0

GREEN

WGD_D1

WHITE

PWR_GND

BLUE

LED

BROWN

BEEP

YELLOW

TAMPER

VIOLET

RS485+

ORANGE

RS485-

SKYBLUE

DQ-MINI User Manual, Version: 1.00

www.duali.com 10

06. Operation & Usage

Tamper (TAMP):

Reader makes alarm when its CASE is forced to open. It also makes TAMPER signal

to access controller. In case of closed CASE, TAMPER line (VIOLET) shows 0V and

otherwise (open) shows 5V.

LED Control:

Reader turns on RED LED when LED Signal (BROWN) with 0V. In case of 5V, BLUE

LED will be on.

Buzzer Control:

Reader makes beep sound when BEEP Signal (YELLOW) with 0V.

07. Output Format

[Data format]

-Data format can be decided by setting. (Refer to chapter 10)

Indice

Altri manuali Duali Lettore di codici a barre

Duali

Duali DQ-CUBE Manuale utente

Duali

Duali DQ-CUBE Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente