Ducane 8961WU Manuale utente
1
ENGLISH
LCD Projector
8961WU/8963
8962WU/8960W
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING Ź%HIRUHXVLQJWKLVSURGXFWEHVXUHWRUHDGDOOPDQXDOVIRUWKLV
product. After reading them, store them in a safe place for future reference.
Ź+HHGDOOWKHZDUQLQJVDQGFDXWLRQVLQWKHPDQXDOVRURQWKHSURGXFW
Ź)ROORZDOOWKHLQVWUXFWLRQVLQWKHPDQXDOVRURQWKHSURGXFW
)LUVWRIDOO ............................................ 2
Entries and graphical symbols explanation ......2
Important safety instruction ..............................2
Regulatory notices .............................. 3
About Electro-Magnetic Interference ................3
About Waste Electrical and Electronic Equipment
... 4
Contents of package........................... 4
Preparing for the remote control ......... 5
Arrangement ....................................... 6
Connecting with your devices ............. 8
)DVWHQLQJWKHDGDSWHUFRYHU ............... 9
Attaching the terminal cover ............. 10
Connecting power supply ................. 11
)DVWHQLQJWKHFDEOH .......................... 11
Turning on the power ........................ 12
Adjusting the projector's elevator ..... 13
Displaying the picture ....................... 14
Turning off the power ........................ 15
Replacing the lamp ........................... 16
&OHDQLQJDQGUHSODFLQJWKHDLU¿OWHU
.. 18
Replacing the internal clock battery
..
20
Using the manuals ........................... 21
6SHFL¿FDWLRQV ................................... 22
Troubleshooting
- Warranty and after-service ........... 24
Contents
NOTE
In this manual, unless any comments are accompanied, “the manuals”
means all the documents provided with this product, and “the product” means this
projector and all the accessories came with the projector.
430-8960W-8961WU-8962WU-8963-Concise-00
2
First of all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the product
as follows, for safety purpose. Please know their meanings beforehand, and heed them.
Important safety instruction
7KHIROORZLQJVDUHLPSRUWDQWLQVWUXFWLRQVIRUVDIHO\XVLQJWKHSURGXFW%HVXUHWR
follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage
GH¿QHGLQWKHVHPDQXDOVRIWKLVSURMHFWRU
WARNING
This entry warns of a risk of serious personal injury or even death.
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
WARNING ŹNever use the product in or after an abnormality (ex. giving
off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.
ŹSituate the product away from children and pets.
Ź.HHSVPDOOSDUWVDZD\IURPFKLOGUHQDQGSHWV,IVZDOORZHGFRQVXOWD
physician immediately for emergency treatment.
ŹDo not use the product when there is fear of a thunderbolt.
ŹUnplug the projector from the power outlet if the projector is not used for the
time being.
ŹDo not open or remove any portion of the product, unless the manuals direct
LW)RULQWHUQDOPDLQWHQDQFHOHDYHLWWR\RXUGHDOHURUWKHLUVHUYLFHSHUVRQQHO
Ź8VHRQO\WKHDFFHVVRULHVVSHFL¿HGRUUHFRPPHQGHGE\WKHPDQXIDFWXUHU
ŹDo not modify the projector or accessories.
ŹDo not let any things or any liquids enter to the inside of the product.
ŹDo not wet the product.
Ź
Do not place the projector where any oils, such as cooking or machine oil, are used.
Oil may harm the product, resulting in malfunction, or falling from the mounted position.
ŹDo not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface
or the leaned table.
- Do not place the product unstably. Place the projector so that it does not
protrude from the surface where the projector is placed on.
- Place your hands on the grip on the bottom of the projector when carrying
the projector.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
Ź
Do not look into the lens and the openings on the projector, while the lamp is on,
since the projection ray may cause a trouble on your eyes.
Ź
Do not approach the lamp cover and the exhaust vents, while the projection lamp
is on. Also after the lamp goes out, do not approach them for a while, since too hot.
3
ENGLISH
Regulatory notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This product may cause interference if used in residential areas. Such use must
be avoided unless the user takes special measures to reduce electromagnetic
emissions to prevent interference to the reception of radio and television
broadcasts.
In Canada
&$1,&(6$10%$
In the US and places where the FCC regulations are applicable
7KLVGHYLFHFRPSOLHVZLWKSDUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFW
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
&ODVV$GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH)&&5XOHV
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to case harmful interference in which case the user will be required to
correct the interference at his own expense.
INSTRUCTIONS TO USERS: Some cables have to be used with the core set.
8VHWKHDFFHVVRU\FDEOHRUDGHVLJQDWHGW\SHFDEOHIRUWKHFRQQHFWLRQ)RUFDEOHV
that have a core only at one end, connect the core to the projector.
CAUTION: &KDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\
responsible for compliance could void the user’s authority to operate the
equipment.
As with any bright source, do not
stare into the direct beam, RG2
IEC 62471-5:2015.
4
Contents of package
Your projector should come with the items shown below. Check that all the items
are included. Require of your dealer immediately if any items are missing.
5HIHUWR¿JXUHF-12 at the back of this manual.
(1) Remote control with the two AA batteries
(2) Power cord (x2)
(3) Computer cable
(4) Lens cover (8961WU/8962WU)
(5) Lens cover (8960W/8963)
Information Sheet
(7) Security label
(8) See Dukane website
(9) Adapter cover
(10) Terminal cover*
(11) HDMI cable holder (x3)
(12) Cable tie (x3)
(13) Cable tie (x1)
(14) Hook metal
(15) Screw
* 8962WU/8960W only
NOTE.HHSWKHRULJLQDOSDFNLQJPDWHULDOVIRUIXWXUHUHVKLSPHQW%HVXUHWR
use the original packing materials when moving the projector.
About Waste Electrical and Electronic Equipment
The mark is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment
including any spent or discarded batteries or accumulators as unsorted
municipal waste, but use the return and collection systems available.
If the batteries or accumulators included with this equipment, display
the chemical symbol Hg, Cd, or Pb, then it means that the battery has a
heavy metal content of more than 0.0005% Mercury or more than, 0.002%
Cadmium, or more than 0.004% Lead.
Regulatory notices (continued)
WARNING Ź.HHSVPDOOSDUWVDZD\IURPFKLOGUHQDQGSHWV7DNHFDUH
not to put in the mouth. If swallowed, consult a physician immediately for
emergency treatment.
5
ENGLISH
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1. Remove the battery cover.
2. Align and insert the two AA batteries
according to their plus and minus
terminals as indicated in the remote
control. (Use the appropriate AA
carbon-zinc or alkaline batteries (non-
rechargeable) in accordance with laws
and regulations.)
3. Put the battery cover back to the former state.
WARNING ŹAlways handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
ZKLFKFRXOGUHVXOWLQ¿UHLQMXU\DQGRUSROOXWLRQRIWKHVXUURXQGLQJHQYLURQPHQW
When replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG'RQRWXVHEDWWHULHVRIGLIIHUHQW
types at the same time. Do not mix a new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
.HHSDEDWWHU\DZD\IURPFKLOGUHQDQGSHWV
Do not recharge, short circuit, solder or disassemble a battery.
'RQRWSODFHDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
Obey the local laws on disposing the battery.
6
Arrangement
Refer to tables T-1 to T-3 at the back of this manual as well as the following to
determine the screen size and projection distance. The values shown in the table
are calculated for a full size screen.
Projector top
Projector bottom
Ⓗ×Ⓥ : Screen size
ⓐ:
Projection distance
(from the front of the
projector unit)
Secure a clearance of 50cm or greater between the exhaust vents and walls, and
a clearance of 30cm or greater between the intake vents and walls. Assume that
WKHUHLVHQRXJKFOHDUDQFHLQWKHIURQWEDFNDQGWRSRIWKHSURMHFWRULQWKH¿JXUH
below.
Secure a clearance of 30cm or greater between the intake vents and walls.
Assume that there is enough clearance in the front, sides, and top of the projector
LQWKH¿JXUHEHORZ
(continued on next page)
50cm or greater
Intake
vents
Exhaust
vents
30cm or greater
30cm or greater
Intake
vents
7
ENGLISH
WARNING ŹInstall the projector where you can access the power outlet
easily.
ŹInstall the projector in a stable horizontal position.
'RQRWXVHDQ\PRXQWLQJDFFHVVRULHVH[FHSWWKHDFFHVVRULHVVSHFL¿HGE\WKH
manufacturer. Read and keep the manuals of the accessories used.
)RUVSHFLDOLQVWDOODWLRQVXFKDVFHLOLQJPRXQWLQJEHVXUHWRFRQVXOW\RXU
GHDOHUEHIRUHKDQG6SHFL¿FPRXQWLQJDFFHVVRULHVDQGVHUYLFHVPD\EH
required.
'RQRWSXWWKHSURMHFWRURQLWVVLGHIURQWRUUHDUSRVLWLRQ
'RQRWDWWDFKQRUSODFHDQ\WKLQJRQWKHSURMHFWRUXQOHVVRWKHUZLVHVSHFL¿HG
in the manual.
Ź'RQRWLQVWDOOWKHSURMHFWRUQHDUWKHUPDOO\FRQGXFWLYHRUÀDPPDEOHWKLQJV
ŹDo not place the projector where any oils, such as cooking or machine oil, are
used.
ŹDo not place the projector in a place where it may get wet.
Ź'RQRWEORFNWKHLQWDNHYHQWVDQGH[KDXVWYHQWVRIWKHSURMHFWRU,IWKHLQWDNH
vents and exhaust vents of the projector are blocked, the accumulated inside
KHDWPD\FDXVH¿UH
CAUTION Ź3ODFHWKHSURMHFWRULQDFRROSODFHZLWKVXI¿FLHQWYHQWLODWLRQ
Do not stop up, block nor cover the projector's vent holes.
'RQRWSODFHWKHSURMHFWRUDWSODFHVWKDWDUHH[SRVHGWRPDJQHWLF¿HOGVGRLQJ
so can cause the cooling fans inside the projector to malfunction.
ŹAvoid placing the projector in smoky, humid or dusty place.
'RQRWSODFHWKHSURMHFWRUQHDUKXPLGL¿HUV
NOTICE Ź3RVLWLRQWKHSURMHFWRUWRSUHYHQWOLJKWIURPGLUHFWO\KLWWLQJWKH
projector’s remote sensor.
Ź'RQRWSODFHWKHSURGXFWLQDSODFHZKHUHUDGLRLQWHUIHUHQFHPD\EHFDXVHG
ŹSet the ALTITUDE MODE of the SERVICE item in the OPTION menu
correctly. If the projector is used with a wrong setting, it may cause damage to
the projector itself or the parts inside.)RUdetails, see User’s Manual -
Operating Guide.
:KHQWKHWHPSHUDWXUHLQVLGHWKHSURMHFWRUULVHVKLJKLWPD\FDXVHWKH
high rotation of the fan for cooling temporarily.
NOTE
Arrangement (continued)
8
Connecting with your devices
%HIRUHFRQQHFWLQJWKHSURMHFWRUWRDGHYLFHFRQVXOWWKHPDQXDORIWKHGHYLFHWR
FRQ¿UPWKDWWKHGHYLFHLVVXLWDEOHIRUFRQQHFWLQJZLWKWKLVSURMHFWRUDQGSUHSDUH
the required accessories, such as a cable in accord with the signal of the device.
Consult your dealer when the required accessory did not come with the product or
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the
FRQQHFWLRQDFFRUGLQJWRWKHIROORZLQJLQVWUXFWLRQV5HIHUWR¿gures F-1 to F-8 at the
back of this manual.
)RUGHWDLOVVHHUser’s Manual - Operating Guide%HIRUHFRQQHFWLQJWKHSURMHFWRU
to a network system, be sure to read User’s Manual - Network Guide too.
WARNING Ź8VHRQO\WKHDSSURSULDWHDFFHVVRULHV2WKHUZLVHLWFRXOG
FDXVHD¿UHRUGDPDJHWKHSURMHFWRUDQGGHYLFHV
8VHRQO\WKHDFFHVVRULHVVSHFL¿HGRUUHFRPPHQGHGE\WKHSURMHFWRU¶V
manufacturer. It may be regulated under some standard.
1HLWKHUGLVDVVHPEOHQRUPRGLI\WKHSURMHFWRUDQGWKHDFFHVVRULHV
'RQRWXVHWKHGDPDJHGDFFHVVRU\%HFDUHIXOQRWWRGDPDJHWKH
accessories. Route a cable so that it is neither stepped on nor pinched out.
Ź
+HDWPD\EXLOGXSLQWKH86%ZLUHOHVVDGDSWHUWRDYRLGSRVVLEOHEXUQV
disconnect the projector power cord for 10 minutes before touching the adapter.
:KHQXVLQJWKH86%ZLUHOHVVDGDSWHUXVHWKHVXSSOLHGDGDSWHUFRYHURU
terminal cover (9,10).
CAUTION Ź)RUDFDEOHZLWKDFRUHDWRQO\RQHHQGFRQQHFWWKHHQGZLWK
the core to the projector. That may be required by EMI regulations.
Ź%HIRUHFRQQHFWLQJWKHSURMHFWRUWRDQHWZRUNV\VWHPEHVXUHWRREWDLQWKH
consent of the administrator of the network.
Ź
Do not connect the LAN port to any network that might have the excessive
voltage.
Ź
7KHGHVLJQDWHG86%ZLUHOHVVDGDSWHUWKDWLVVROGDVDQRSWLRQLVUHTXLUHGWRXVH
WKHZLUHOHVVQHWZRUNIXQFWLRQRIWKLVSURMHFWRU%HIRUHFRQQHFWLQJWKH86%ZLUHOHVV
adapter, turn off the power of the projector and disconnect the power cord.
NOTE 'RQRWWXUQRQRURIIWKHSURMHFWRUZKLOHFRQQHFWHGWRDGHYLFHLQ
operation, unless that is directed in the manual of the device.
6RPHLQSXWSRUWVDUHVHOHFWDEOHLQWKHXVH)RUGHWDLOVVHHUser's Manual -
Operating Guide.
%HFDUHIXOQRWWRPLVWDNHQO\FRQQHFWDFRQQHFWRUWRDZURQJSRUW
9
ENGLISH
:KHQXVLQJWKH86%ZLUHOHVVDGDSWHUXVHWKHVXSSOLHGDGDSWHUFRYHUIRUWKHIW
prevention.
USB wireless adapter:
86%:/1
Temperature range: 0 ~ 45°C(operating)
1. Loosen the screw on the bottom left of the WIRELESS port.
2. Insert the tab of the cover into the hole at the upper right of the WIRELESS
port in the direction of the arrow.
3. Align the screw holes on the projector and the cover. Then insert the screw
removed from the projector into the hole and tighten the screw.
Fastening the adapter cover
Tab
WARNING Ź.HHSVPDOOSDUWVDZD\IURPFKLOGUHQDQGSHWV7DNHFDUHQRW
to put in the mouth.
Ź+HDWPD\EXLOGXSLQWKH86%ZLUHOHVVDGDSWHUWRDYRLGSRVVLEOHEXUQV
disconnect the projector power cord for 10 minutes before touching the adapter.
10
Attaching the terminal cover
Insert the two claws of the Terminal cover into the hole of
WKHFDVHDQGFRQ¿UP +RRNLV¿WWLQJLQWRWKHFDVH
Terminal cover
When detaching the Terminal cover, push the Hook
in the direction of the arrow and pull it forward.
Claw
Hook
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Ducane Proiettore
