Duplo DC-618 Manuale utente
INSTRUCTION MANUAL
CPM-08
DC-618 Cross Tool Module
i
Introduction
Thank you for your purchase of the DC-618 Cross Tool Module.
To ensure safe and efficient long-term use of this product, read and thoroughly understand this
manual before using the product. After using this manual, be sure to keep it in a handy place for
reference.
Pictorial Symbols and Other Notations used in this manual
: Introduces instructions for correct operation of the product.
If these instructions are ignored, the product may not operate at optimum
performance or may break down.
: Introduces information that is useful for operation and maintenance of the
product, or information about the product’s performance, etc.
IMPORTANT
REFERENCE
(→P.00 xxxx): Indicates the page number and item containing related information.
PLEASE NOTE
In the interest of upgrading our products, specifications and other data given in this
manual are subject to change without notice. If the manual contains anything that you do
not understand, contact the dealer for clarification.
Trademarks
●Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United State and/or other countries.
●All other trademarks are the property of their respective owners.
ii
Notes on Safety (Please Read and Observe)
A circle with a line through it indicates a prohibited action.
The particular act prohibited is indicated by a picture inside the circle.
(In the example shown here, the prohibited act is disassembly.)
A black disc indicates an instruction, or sometimes a prohibited action.
The instruction itself is indicated by pictorial symbols drawn in white on
the disc. (In the example shown here, the instruction is Remove the plug
from the outlet.)
Various symbols and pictures are used in this manual and on the labels affixed to the machine.
These symbols and pictures provide warnings and instructions to prevent danger to you or other
personnel, and to prevent damage to office property.
The meanings of these symbols and pictures are explained below.
Indicates a high degree of potential danger. Failure to heed the warning
may lead to death or serious injury.
Indicates a medium degree of potential danger. Failure to heed the
caution may lead to injury or damage to property.
<Examples of Pictorial Symbols>
WARNING
●Precautions for Use
Safety Precautions
WARNING
CAUTION
●If the machine is used after foreign matter (metal fragments, water, or liquid) has
entered the machine, this may result in fire or electric shock.
→Turn the main unit’s power switch OFF, and then remove the power plug from
the outlet. Contact the sales distributor.
●If the machine is used after heat, smoke, a strange smell, or other abnormality
has been detected, this may result in fire or electric shock.
→Turn the power switch OFF, and then remove the power plug from the outlet.
Contact the sales distributor.
●Do not insert or drop metal, flammable material, or any other materials through
the ventilation holes into the interior of the machine.
→Doing so may result in fire or electric shock.
●Keep the machine away from a pin, wire, or other metallic or foreign objects.
Do not allow liquid to enter the machine through its openings or gaps.
→Malfunctions and a fire or electric shock may result.
●Do not place flower vases, flowerpots, cups, or water containers (including metal
containers) on top of the machine.
→Fire or electric shock may result if liquid spills inside the machine.
iii
CAUTION
●Caution for Cleaning
●Before cleaning the machine, turn offthe power switch and unplug the power
cord.
→If the machine is activated accidentally, it may cause injury.
●Do not use flammable sprays or solvents inside or near the machine.
→Gas may accumulate inside the machine causing a fire or explosion.
●Preventing Injury to Hands or Fingers
●The Cross Tool Module contains uncovered upper tools. Keep your hands or
fingers offinside it.
●Use pliers or a similar tool to remove jammed document.
Be sure to unplug the power cord before removing jammed document in order to
prevent an electric shock.
WARNING
iv
Chapter 4
Chapter 3
Chapter 2
Chapter 1
Contents
Introduction................................................................................. i
Notes on Safety (Please Read and Observe)....................................... ii
Before Using This Module
Parts Names and Their Functions .................................................... 2
Appearance .......................................................................... 2
Inside of the DC-618 ............................................................... 4
How to Remove and Install the CPM (Cross Tool Module) ....................... 5
Removing the CPM (Cross Tool Module)....................................... 5
Installing the CPM (Cross Tool Module) ........................................ 6
How to Replace a Rotary Tool ......................................................... 7
Removing a Rotary Tool from the Rotary Tool Unit ........................... 7
Attaching a Rotary Tool to the Rotary Tool Unit ............................... 9
Adjusting the Depth of a Rotary Tool ...........................................10
Programming a JOB on the Control Panel
Before Programming a JOB...........................................................12
Standby Screen ....................................................................12
JOB Entry.................................................................................14
Setting for the CPM (Cross Tool Module) .....................................15
Wizard ...............................................................................16
Direct - Advanced Mode ..........................................................20
Direct - Simple Mode..............................................................24
Error Messages ....................................................................29
Basic Operations
Processing Documents by Retrieving a Saved JOB..............................32
Process ...................................................................................34
Adjust......................................................................................36
Environment..............................................................................37
Programming a JOB on a Computer
PC Controller Setting ...................................................................40
Main Screen ........................................................................40
Wizard ...............................................................................43
Direct.................................................................................62
Retrieving and Processing a Saved JOB ...........................................72
Setting Default Values for a JOB .....................................................73
Environment ........................................................................73
Function Setting .........................................................................75
Process ..............................................................................75
Adjust ................................................................................76
v
Chapter 5
Chapter 6
Chapter 7
Troubleshooting
If a Message Appears ..................................................................80
If a Document Jam Has Occurred....................................................81
J05 CHECK MARGIN/SLOT2 ...................................................81
Daily Maintenance
Daily Maintenance ......................................................................86
Specifications
Specifications ............................................................................88
MEMO
1
Chapter 1
1
Before Using This Module
Before Using This Module
This chapter contains essential information that you should know such as the part
names of the machine and how to remove and install the module.
Parts Names and Their Functions ......................................................... 2
Appearance ............................................................................... 2
Inside of the DC-618 .................................................................... 4
How to Remove and Install the CPM (Cross Tool Module) ............................ 5
Removing the CPM (Cross Tool Module)............................................ 5
Installing the CPM (Cross Tool Module) ............................................. 6
How to Replace a Rotary Tool .............................................................. 7
Removing a Rotary Tool from the Rotary Tool Unit ................................ 7
Attaching a Rotary Tool to the Rotary Tool Unit .................................... 9
Adjusting the Depth of a Rotary Tool ................................................10
2
Parts Names and Their Functions
Appearance
No. Name Function
1 Fixing screw Loosen this when removing the CPM (Cross Tool Module)
from the DC-618.
Secure this when having installed the CPM (Cross Tool
Module) in the DC-618.
2 Adjustment knob Adjusts the depth of the rotary tool.
Turning this clockwise makes the depth deeper and turning this
counterclockwise makes the depth shallower.
Adjust the depth of the rotary tool depending on the types of it
attached to the rotary too unit. (→P.10)
To replace the rotary tool, turn this counterclockwise until
it stops to raise the rotary tool to the upper limit position.
(→P.7)
3 Color label Install the CPM (Cross Tool Module) in a slot of the DC-618,
to which the color label affixed is the same as this on the CPM
(Cross Tool Module).
You can install the CPM (Cross Toll Module) in slot 2 only.
4 Guide assy Supports the conveyance of a document.
Remove this when replacing the tool.
(→P.7)
5 Hand knob When removing the rotary tool from the rotary tool unit,
remove this.
When attaching the rotary tool to the rotary tool unit, secure
it with this.
(→P.9)
1
1
4
23
5
Altri manuali per DC-618
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Duplo Taglierina
Duplo
Duplo DocuCutter DPC-400 Manuale utente
Duplo
Duplo DocuCutter CC-229 Istruzioni per la costruzione
Duplo
Duplo DocuCutter DC-545HC Manuale utente
Duplo
Duplo DC-535 Manuale utente
Duplo
Duplo DocuCutter CC-228 Istruzioni per la costruzione
Duplo
Duplo DC-646 Manuale utente
Duplo
Duplo DocuCutter DC-545 Guida all'installazione
Duplo
Duplo DocuCutter CC-330 Istruzioni per la costruzione
Duplo
Duplo DC-618 Manuale utente
Duplo
Duplo DocuCutter CC-330 Guida rapida
