DVDO DVDO-Xtend-RX100 Manuale utente
3
DVDO-Xtend-RX100_V1 0.0
DVDO
DVDO-Xtend-RX100 HDBaseT 2.0 Receiver with USB and Audio De-embedding User Manual
Table of Contents
Introduction...................................................................................................... 4
Features ................................................................................................... 4
Package Contents .................................................................................... 5
Specifications............................................................................................ 6
Panel Description ..................................................................................... 8
Front Panel........................................................................................ 8
Rear Panel ........................................................................................ 8
Installation and Wiring.................................................................................... 10
Installation .............................................................................................. 10
Wiring ..................................................................................................... 10
RS232 Operation ........................................................................................... 12
Warranty Terms and Conditions..................................................................... 14
4
DVDO-Xtend-RX100_V1.0.0
DVDO-Xtend-RX100 HDBaseT 2.0 Receiver with USB and Audio De-embedding User Manual
DVDO
Introduction
This product is an HDBT 2.0 receiver that designed to work with an HDBT wall
plate transmitter, reliably extending UHD video, multi-channel audio, USB 2.0,
RS232 signal and power up to 100m/330ft over a single Cat X cable.
It supports USB 2.0 pass-through, providing a solution for users who need to
remote control PC sources with keyboard, mouse, interactive display or USB
streaming devices over distance. RS232 port allows bi-directional RS232 serial
communication. With PSE module built-in, it can carry power to the transmitter
with PD module via a single power supply.
Features
Simple, ultra-slim and cost-effective HDBT 2.0 receiver
HDBT input and HDMI output support resolutions up to 4K@60Hz (YUV
4:2:0) and HDCP 2.2
HDBT transmission up to 100m/330ft at 1080P@60Hz and 4K@60Hz
(YUV 4:2:0) via a Cat 6/6a/7 cable
HDBT transmission up to 100m/330ft at 1080P@60Hz and up to 90m/295ft
at 4K@60Hz (YUV 4:2:0) via a Cat 5e cable
Supports analog audio pass-through from transmitter to receiver
Supports analog audio de-embedding for HDMI output
High-speed USB 2.0 pass-through over HDBT
Provides four USB Device ports for remote KVM (Keyboard, Video, Mouse)
control
Supports bi-directional RS232 serial communication to control the
RS232-enabled device when works with a normal HDBT transmitter
Supports bi-directional RS232 serial communication to control a wall plate
transmitter when works with this transmitter
5
DVDO-Xtend-RX100_V1 0.0
DVDO
DVDO-Xtend-RX100 HDBaseT 2.0 Receiver with USB and Audio De-embedding User Manual
Built-in PSE to power remote HDBT transmitter
Package Contents
Before you start the installation of the product, please check the package
contents as below:
DVDO-Xtend-RX100 Receiver x 1
DC 12V Power Adapter (with US, UK, EU and AU pins) x 1
Phoenix Male Connector (3.5mm, 3 Pins) x 1
Mounting Brackets (with Screws) x 2
6
DVDO-Xtend-RX100_V1.0.0
DVDO-Xtend-RX100 HDBaseT 2.0 Receiver with USB and Audio De-embedding User Manual
DVDO
Specifications
Technical
Input
1 x HDBT
Input Signal Type HDBT 2.0
Input/Output Resolutions
Supported
VESA:
800x6008, 1024x7688, 1280x7688, 1280x8008,
1280x9608, 1280x10248, 1360x7688, 1366x7688,
1440x9008, 1600x9008, 1600x12008, 1680x10508,
1920x12008
SMPTE:
720x480P7,8, 720x576P6, 1280x720P6,7,8,
1920x1080P6,7,8, 3840x2160P2,3,5,6,8,
4096x2160P2,3,5,6,8
1 = at 23.98Hz, 2 = at 24Hz, 3 = at 25Hz, 4 = at
29.97Hz, 5 = at 30Hz, 6 = at 50Hz, 7 = at 59.94Hz, 8
= 60Hz
Note:
4096x2160/3840x2160@50/60Hz is based on
chroma sub-sampling 4:2:0 8-bit only.
Input Video Level
0.5~1.0V p-p
Maximum Pixel Clock
297MHz
Output 1 x HDMI OUT
Output Signal Type
HDMI 1.4
Video Impedance 100ohms
Audio Format
HDMI Out:Fully supports audio formats in HDMI 2.0
specification, including PCM 2.0/5.1/7.1, Dolby
TrueHD, Dolby Atmos, DTS-HD Master Audio and
DTS:X
AUDIO Out (Unbalanced mini jack): Stereo
Control Method 1 x RS232, 4 x USB Devices
General
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-20°C to 70°C (-4°F to 158°F)
Humidity
10% to 90%, non-condensing
ESD Protection
Human-body Model:
±8kV (Air-gap discharge)/
±4kV (Contact discharge)
Power Supply
DC 12V 2A
7
DVDO-Xtend-RX100_V1 0.0
DVDO
DVDO-Xtend-RX100 HDBaseT 2.0 Receiver with USB and Audio De-embedding User Manual
General
Power Consumption (Max)
8W
Device Dimension
(W x H x D)
210mm x 25mm x 90.2mm/8.27” x 0.98” x 3.55”
Product Weight
0.46kg/1.01lbs
Transmission Distance
Note: The use of T568B straight-through Category cables is recommended.
Cable Type
Range
Supported Video
Cat 5e
90m/295ft
4K@60Hz 4:2:0 8bit
100m/328ft
1080P@60Hz
Cat 6/6a/7 100m/328ft 4K@60Hz 4:2:0 8bit,
1080P@60Hz
9
DVDO-Xtend-RX100_V1 0.0
DVDO
DVDO-Xtend-RX100 HDBaseT 2.0 Receiver with USB and Audio De-embedding User Manual
ID
Name
Description
5 AUDIO OUT
Unbalanced stereo audio output.
•De-embed (left): For audio de-embedding
from the HDMI output.
•Pass Through (right): F
or audio
pass-
through from Audio IN port on the
transmitter to this port.
6 USB DEVICE Connect to USB devices (e.g. keyboard,
mouse, USB camera, USB flash drive, etc.).
Indice
Altri manuali DVDO Ricevitore
