
- 4 -
1
2
4a
3
4b 5
CONSOLE STAND INSTALLATION
FOR FITZGERALD CONSOLE FOR OAK HILL CONSOLE
Suitable reinforcement is required for anchoring the
lavatory to the wall. Determine horizontal centerline
location “*” of lavatory mounting holes. (see Figure 1).
Rough in supply lines and waste per rough in dimensions.
* For Oak Hill Console: It must have cross support for
fastening the stablizing frame.
Refer to exploded view. Set aside items
6E through 6H. Assemble console
stand using items 1 through 5 and 6A
through 6D.
Level stabilizing frame item 1. Mark
position of brackets (item 6E). Attach
brackets to wall using items 6G & 6H.
Note: Remove & re-install stabilizing
frame (item 1) if necessary.
Move the metal stand into place.
Attach center rails of console to wall
using items 6G thru 6H. The glides can
be adjusted, but it is recommended not
to exceed 1/2"if possible.
Level stabilizing frame item 1. Using
item 6E (screw) and 6F (washer) to
fasten the frame to the wall.
Note: Remove & re-install stabilizing
frame (item 1) if necessary.
Continue with installation
for appropriate sink and
faucet options chosen.
NOTCH STUDS
OR TOE-NAIL
C/L OF 2 x 6
REINFORCEMENT
DRAIN PIPE
FIGURE 1
WATER
SUPPLY
PIPES
LAVATORY
CROSS-PIECE
SUPPORT
INSTALLING
CROSS-PIECE
*FOR OAK HILL
CONSOLE
STABILIZING
FRAME
FINISHED FLOOR
In the United States:
DXV
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: (800) 227-2734
www.DXV.com
In Canada:
DXV
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: 1-800-395-1498
In Mexico:
DXV
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx