Dymo LabelManager 210D Manuale utente

LabelManager®210D

User Guide

1Tape cutter button 9Accented character 17 AC power connector

2Print 10 Punctuation 18 Clear

3Save 11 Space bar 19 Recall

4OK 12 Insert 20 Navigation

5Number lock 13 CAPS 21 LCD display

6Backspace 14 Format 22 Cancel

7Currency 15 Settings 23 Preview

8Return 16 Power

9101112

17 18 2019 21 22 23

Figure 1 LabelManager 210D Electronic Label Maker

About Your New Label Maker

With the DYMO LabelManager 210D electronic label maker, you can create a wide variety of

high-quality, self-adhesive labels. You can choose to print your labels in many different font

sizes and styles. The label maker uses DYMO D1 tape cassettes in widths of 6 mm, 9 mm, or

12 mm. These tape cassettes are available in a wide range of colors.

Visit www.dymo.com for information on obtaining labels and accessories for your label

maker.

Product Registration

Visit www.dymo.com/registration to register your label maker online.

Getting Started

Follow the instructions in this section to print your first label.

Connecting the Power

The label maker is powered by standard batteries or an AC power adapter. To save power,

the label maker automatically turns off after two minutes of inactivity.

Inserting the Batteries

The label maker uses six high-capacity AA alkaline

batteries.

To insert the batteries

1. Slide the battery compartment cover away from

the label maker. See Figure 2.

2. Insert the batteries following the polarity

markings (+ and –).

3. Replace the cover.

ÇRemove the batteries if the label maker will not be used for a

long period of time.

Figure 2

Connecting the Optional Power Adapter

An optional 9 Volt, 1.5 A power adapter can also be used to power the label maker.

Connecting the AC adapter to the label maker disconnects the batteries as a power source.

Use only power the adapter listed in this user guide:

Adapter model DSA-18PFM-09 Fc 090200 (note: “c” can be EU, UP, UK, US, UJ, JP, CH, IN, AU,

KA, KR, AN, AR, BZ, SA, AF or CA) from Dee Van Enterprise Co., Ltd.

To connect the power adapter

1. Plug the power adapter into the power connector on the

top, left side of the label maker.

2. Plug the other end of the power adapter into a power

outlet.

xMake sure the label maker power is turned oﬀ before

you disconnect the power adapter from the main

power source. Otherwise, your most recent memory

settings will be lost.

Inserting the Tape Cassette

Your label maker comes with one tape

cassette. You can purchase additional tape

cassettes from your local office supply

retailer.

xCutter blade is extremely sharp. While

replacing the label cassette, keep fingers and other body

parts away from cutter blade and do not press the cutter

button.

To insert the tape cassette

1. Lift the tape cassette cover to open the tape

compartment. See Figure 3.

2. Insert the cassette with the label facing up and

positioned between the guideposts.

3. Press firmly until cassette clicks into place. See Figure 5.

4. Close the tape cassette cover.

Figure 3

Figure 4

Figure 5

Click!

Guideposts

Click!

Using the Label Maker for the First Time

The first time you turn on the power, you are asked to select the language and units of

measure. These selections will remain set until you change them, or until the label maker is

reset. You can change these selections using the Settings key.

To set up the label maker

1. Press {to turn on the power.

2. Select the language and press }.

By default, the language is set to English. The language option you choose determines

the character set that is available.

3. Select inches or mm and press }.

4. Select the width of the tape cassette currently inserted in the label maker.

You are now ready to print your first label.

To print a label

1. Enter text to create a simple label.

2. Press G.

3. Select the number of copies.

4. Press }to print.

5. Press the cutter button to cut the label.

Congratulations! You printed your first label. Continue reading to learn more about the

options available for creating labels.

Getting to Know the Label Maker

Become familiar with the location of the feature and function keys on your label maker.

Refer to Figure 1. The following sections describe each feature in detail.

Power

The {button turns the power on and off. After two minutes of no activity, the power is

switched off automatically. The last label created is remembered and displayed when the

power is turned back on. The previously selected style settings are also restored.

LCD Display

You can enter up to 99 characters and spaces. The display shows about thirteen characters

at a time. The number of characters displayed will vary due to proportional spacing.

With DYMO’s exclusive graphical display, most of the formatting you add is visible instantly.

For example, the italics and rounded border added to the text below is clearly displayed.

Feature indicators along the top of the LCD display appear black to let you know when a

feature is selected.

Format

The 2key displays the Font Size, Clear Format, Mirror, Label Length, Alignment,

Underline, Borders, and Style submenus. These formatting features are described later in

this User Guide.

Insert

The 8key allows you to insert symbols or saved text on your label. These features are

described later in this User Guide.

Settings

The Ikey displays the Language, Units, Label Width, and Contrast menu selections.

These features are described later in this User Guide.

CAPS Mode

The key toggles capitalization on and off. When CAPS mode is on, the CAPS mode

indicator is shown on the display and all letters that you enter will be capitalized. The

default setting is CAPS mode on. When CAPS mode is off, all letters appear in lower case.

Num Lock

The key provides access to the numbers located on some of the alphabetic keys. When

Num Lock mode is turned on, the Num Lock indicator is shown on the display and the

numbers 0 through 9 appear when you press the corresponding letter keys. Num Lock is

turned off by default.

Backspace

The 0key removes the character to the left of the cursor.

Clear

The 6key gives you a choice to clear all label text, just the text formatting, or both.

Navigation Keys

You can review and edit your label using the left and right arrow keys. You can also navigate

through menu selections using the up and down arrow keys, and then press

}

to make

a selection.

Cancel

The 7key allows you to exit from a menu without making a selection or to cancel an action

Formatting Your Label

You can choose from a number of formatting options to enhance the appearance of your labels.

Changing the Font Size

Six font sizes are available for your labels: Extra Small, Small, Medium, Large, Extra Large,

and Extra Extra Large. The font size you select applies to all characters on a label.

To set the font size

1. Press 2.

2. Select Font Size and press }.

3. Select the desired font size and press }.

The font size indicator on the display changes as you select font sizes.

Adding Font Styles

You can choose from six different font styles:

Normal

Bold

Italic

Outline

Shadow

Vertical

The style you select applies to all characters. Styles can be used with alphanumeric

characters and some symbols.

To set the font style

1. Press 2.

2. Select Style and press }.

3. Select a font style and press }.

Adding Borders and Underline Styles

You can highlight your text by choosing a border or underline style.

Underline Parchment

Square Callout

Rounded Flowers

Edged Crocodile

Pointed

A label can be underlined or enclosed in a border, but not both together.

To add a border style

1. Press 2.

2. Select Borders and press }.

3. Select a border style and press }.

When using borders on two-line labels, both lines are enclosed in one border.

To add an underline

1. Press 2.

2. Select Underline and press }.

3. Press }again when the underlined text is shown in the display.

On two-line labels, both lines are underlined.

Creating Two-Line Labels

You can print a maximum of two lines on labels.

To create a two-line label

1. Type the text for the first line and press D.

A multi-line symbol ëis inserted at the end of the first line, but will not print on the

label.

2. Type the text for the second line.

3. Press Gto print.

Aligning the Text

You can align the text to print centered, left justified, or right justified on the label. The

default alignment is centered.

To change the alignment

1. Press 2.

2. Select Alignment and press }.

3. Select right, left, or centered alignment and press }.

Creating Fixed-Length Labels

Normally, the length of the label is determined by the length of the text. However, you can

choose to set the length of the label for a specific application. When you choose a fixed

label length, the label text is automatically resized to fit the label. If the text cannot be

adjusted to fit within the fixed label length, a message is displayed showing the smallest

possible label length for this text. You can choose a fixed length label up to 400 mm long.

To make your label a fixed length

1. Press the 2key.

2. Select Label Length and press }.

3. Select Fixed and press }.

4. Select the length for your label and press }.

Using Mirror Text

The mirror format allows you to print text which reads from right to left, as you would see

it in a mirror.

To turn on mirror text

1. Press the 2key.

2. Select Mirror and press }.

3. Select On and press }.

Using Symbols and Special Characters

Symbols, punctuation, and other special characters can be added to your labels.

Adding Symbols

The label maker supports the extended symbol set shown below.

Altri manuali per LabelManager 210D

Indice

Altri manuali Dymo Etichettatrice

Dymo

Dymo LabelWriter DUO Manuale utente

Dymo

Dymo RhinoPRO 5000 Manuale utente

Dymo

Dymo Junior Manuale utente

Dymo

Dymo LabelWriter 400 Duo Guide Manuale utente

Dymo

Dymo LetraTag Plus LT-100T Manuale utente

Dymo

Dymo RHINO 6000 Manuale utente

Dymo

Dymo 4000 Manuale utente

Dymo

Dymo 1540 Manuale utente

Dymo

Dymo LetraTag XR Manuale utente

Dymo

Dymo LP200-Hebrew Manuale utente

Dymo

Dymo LetraTAG XM Manuale utente

Dymo

Dymo LabelManager 160 Manuale utente

Dymo

Dymo LabelManager 350 Manuale utente

Dymo

Dymo Rhino 4200 Industrial Label Printer Manuale utente

Dymo

Dymo LetraTag Manuale utente

Dymo

Dymo LP300 Manuale utente

Dymo

Dymo LabelManager 360D Manuale di servizio

Dymo

Dymo LabelPOINT 100 Manuale utente

Dymo

Dymo LabelManager 210D Manuale utente

Dymo

Dymo LabelWriter 450 Manuale utente

Dymo

Dymo LabelManager 350D Manuale utente

Dymo

Dymo MobileLabeler Manuale utente

Dymo

Dymo RhinoPRO 3000 Manuale utente

Dymo

Dymo LetraTag 200B Manuale utente

Manuali Etichettatrice popolari di altre marche

Brother

Brother P-Touch 2420PC Manuale utente

newell

newell Dymo LabelManager 210D Manuale utente

Brother

Brother TD-4000 Manuale utente

U-Line

U-Line BROTHER H-8754 Manuale utente

Tharo Systems

Tharo Systems H-435+ Manuale utente

Brother

Brother E300 Manuale utente

Godex

Godex RT700 SERIES Manuale utente

ID Technology

ID Technology 252 Manuale utente

Labelmate

Labelmate MC-11 Manuale utente

CAB

CAB XD4M/300 Manuale utente

Avery Dennison

Avery Dennison Pathfinder 6057 Manuale di servizio

Brother

Brother P-touch PT-9700PC Manuale utente

TSC

TSC PEX1000 Series Manuale utente

Adkins

Adkins Label Master Manuale utente

Epson

Epson LabelWorks LW-400 Manuale utente

Primera

Primera 510212 Manuale utente

Brady

Brady BradyPrinter S3100 Manuale utente

DuraLabel

DuraLabel LabPRO Manuale utente