DynaColor QIG-701-Series Manuale utente
00P6H7010ZSEC2
Integrated High Speed Dome Camera
Indoor
Installation Guide
Version 3.2
Installation Guide
1
Preface
The information given in this manual was current when published. The company reserves
the right to revise and improve its products. All specifications are subject to change without
notice.
Notice
This manual provides the installation information for the indoor integrated
high speed dome. To work with the Dome Cameras, any installer or
technician must have the following minimum qualifications:
•A basic knowledge of CCTV systems and components
•A basic knowledge of electrical wiring and low-voltage electrical
hookups
•A basic knowledge of network system setting
•Have read this manual completely
Copyright
Under copyright laws, the contents of this user manual may not be copied,
photocopied, translated, reproduced or reduced to any electronic medium or
machine-readable format, in whole or in part, without prior written permission
of the company
Important Information
Before proceeding, please read and observe all instructions and warnings in
this manual. Retain this manual with the original bill of sale for future
reference and, if necessary, warranty service. When unpacking your unit,
check for missing or damaged items. If any item is missing, or if damage is
evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your
dealer for assistance.
Regulation
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Installation Guide
2
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste in
accordance with Directive 2002/96/EC. Instead it shall be
handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By proper
waste handling of this product you ensure that it has no
negative consequences for the environment and human
health, which could otherwise be caused if this product is
thrown into the garbage bin. The recycling of materials will
help to conserve natural resources.
For more details information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
Compliance is evidenced by written declaration from our
suppliers, assuring that any potential trace contamination
levels of restricted substances are below the maximum
level set by EU Directive 2002/95/EC, or are exempted due
to their application.
Installation Guide
3
Warnings and Cautions
•Handle the camera carefully
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handing or storage.
•Installing electricity wiring carefully
Ask qualified personnel of electrical wiring for the installation. Please note
that input electricity to the unit is at tolerance of DC 12V/AC 24V ± 10%.
The camera is capable of surge protection; ensure AC power model unit
grounded appropriately against damage of heavy current or electric
shock.
•Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for servicing.
•Do not block cooling holes on the bracket
This camera has a cooling fan inside. Blocking the cooling holes leads to
build up of heat the camera and may cause malfunction.
•Do not operate the camera beyond the specified temperature,
humidity or power source ratings
Use the camera under conditions where temperature is between 0°C ~
40°C (32°F ~ 104°F), and relative humidity is below 90%.
•Do not expose the camera to rain or moisture, or try to operated it in
wet areas
This product is designed for indoor use or locations where it is protected
from rain and moisture. Turn the power off immediately if the camera is
wet and ask a qualified service person for servicing. Moisture can damage
the camera and also create the danger of electric shock.
•Do not use strong or abrasive detergents when cleaning the camera
body
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard
to remove, use a mild detergent and wipe the camera gently.
Installation Guide
4
•Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or
not, never aim it at the sun or other extremely bright objects. Otherwise,
the camera may be smeared or damaged.
Installation Guide
5
Table of Contents
1. Introduction............................................................................................................................ 7
2. Standard Package Content.................................................................................................... 8
3. Dome Setups and Cable Connection ................................................................................. 10
3.1 Dome Camera Setups................................................................................................ 10
3.1.1 Switch/Connector Definition......................................................................... 10
3.1.2 Communication Switch Setting.................................................................... 12
3.1.2.1 Analog Dome Camera................................................................ 12
3.1.2.2 IP Dome Camera ....................................................................... 13
3.1.3 ID Setting..................................................................................................... 13
3.1.3.1 Analog Dome Camera................................................................ 13
3.1.3.2 IP Dome Camera ....................................................................... 14
3.1.4 Camera Control Protocol Setting................................................................. 14
3.1.4.1 Analog Dome Camera................................................................ 14
3.1.4.2 IP Dome Camera ....................................................................... 15
3.2 Cable Definition and Requirements............................................................................ 15
3.2.1 Cable Requirements.................................................................................... 15
3.2.2 22-Pin Data Cable ....................................................................................... 16
3.2.2.1 Analog Dome Camera................................................................ 16
3.2.2.2 IP Dome Camera ....................................................................... 17
3.2.3 22-Pin Connector Definition......................................................................... 17
3.2.3.1 Analog Dome Camera................................................................ 19
3.2.3.2 IP Dome Camera ....................................................................... 19
3.2.4 RS-485 Connector Definition (Analog) ........................................................ 20
3.2.5 Cable Wiring and Connection...................................................................... 20
3.2.6 Ethernet Cable Connection.......................................................................... 21
4. Dome Installation ................................................................................................................. 22
4.1 Dome Dimension........................................................................................................ 22
4.2 Optional Accessories.................................................................................................. 22
4.3 Ceiling Mount ............................................................................................................. 30
4.3.1 Hard Ceiling Mounting ................................................................................. 30
4.3.2 In-ceiling Mounting....................................................................................... 33
4.3.3 In-ceiling Mounting with Ceiling Panel......................................................... 36
4.3.4 Ceiling Mounting with Straight Tube ............................................................ 37
4.4 Wall Mount ................................................................................................................. 40
4.4.1 Compact Pendent Mount ............................................................................. 40
4.4.2 Standard Pendent Mount ............................................................................. 42
4.4.3 Wall Box Mounting....................................................................................... 44
4.5 Corner Mount ............................................................................................................. 46
Installation Guide
6
4.5.1 Corner Standard Mounting Plate/Corner Plate Mini..................................... 46
4.5.2 Corner Thin/Wide Box Mounting.................................................................. 48
4.6 Pole Mount ................................................................................................................. 50
4.6.1 Pole Thin/Wide Direct Mounting .................................................................. 50
4.6.2 Pole Thin/Wide Box Mounting ..................................................................... 52
5. System Expansion ............................................................................................................... 54
5.1 Connecting with Connector Box ................................................................................. 54
5.2 Data Formats Transforming ....................................................................................... 55
5.3 Signal Distribution Unit ............................................................................................... 56
5.4 Coaxial Telemetry ...................................................................................................... 57
6. System Integration............................................................................................................... 58
6.1 Using Pelco Keyboard................................................................................................ 58
6.2 Using Philips Allegiant Keyboard ............................................................................... 59
Appendix A: Technical Specification .......................................................................................... 60
Installation Guide
7
1. Introduction
The Integrated High Speed Dome Camera is designed to deliver superb
performance and durability with an intelligent and stylish housing that is
suitable in any security and surveillance installation. In addition, the Dome
Camera supports one cabling for easy installation. Large set of built-in
protocols, including DynaColor, Pelco, VCL, Philips, AD-422 (Manchester),
etc., provide connectivity to other suppliers’ surveillance systems.
General Operation Requirements:
A minimum of one control device is required for operation, such as a control
keyboard, a DVR or a PC. The Integrated High Speed Dome Camera
contains a built-in receiver that decodes commands originating from a control
device.
Connect Dome Cameras to other devices, as shown in the diagram below, to
complete a video surveillance system.
NOTE: To extend the network distance up to 1.2 km (4000 feet) and to
protect the connected devices, it is highly recommended to place a
repeater at the mid-point of the network. However, a repeater may be needed
in the network distance less than 1.2 km if the used cables are not the CAT 5,
24-gauge cables; also see 3.2.4 RS-485 Connector Definition (Analog).Refer
to the repeater’s manual for detailed information.
Installation Guide
8
2. Standard Package Content
Before proceeding, please check the box contains the items listed here. If any
item is missing or has defects, DO NOT install or operate the product and
contact your dealer for assistance.
Analog Dome Camera Package
Dome Body
Hard Ceiling Mount and
Decoration Ring
Fixing Plate
5.4” Optical Cover
Data Cable for Power
Supply, Video and
RS-485 (AC 24V)
Data Cable for Power
Supply, Video and
RS-485 (DC 12V)
Quick Guide
CD: Operation Manuals
Power Adaptor & Power
Cord (DC model only)
Installation Guide
9
IP Dome Camera Package
Dome Body
Hard Ceiling Mount and
Decoration Ring
Fixing Plate
5.4” Optical Cover
Data Cable for Power
Supply, Video and Audio
(AC 24V)
Quick Guide
CD: Operation Manuals
Indice
Altri manuali DynaColor Telecamera di sicurezza
DynaColor
DynaColor NH720 Series Manuale utente
DynaColor
DynaColor QIG-510 Series Manuale utente
DynaColor
DynaColor DH801 Manuale utente
DynaColor
DynaColor W series Manuale utente
DynaColor
DynaColor W-1 Manuale utente
DynaColor
DynaColor S3 Manuale utente
DynaColor
DynaColor NH820 Series Manuale utente
DynaColor
DynaColor W series Manuale utente
DynaColor
DynaColor DH701 Manuale utente
