DynaColor W series Manuale utente

003B02WXZXA3

Vandal Proof / Lightweight Fixed Dome

IP Camera

Installation Guide

Indoor / Outdoor

Ver. 1.3

Table of Contents

1. Indoor Camera Installation ................................................................................................... 3

1.1 Hard Ceiling ................................................................................................................. 3

1.2 In-Ceiling (T-Bar) Mounting ........................................................................................ 11

1.3 4S Mount Electrical Box ............................................................................................. 19

1.4 Corner Mounting ........................................................................................................ 22

2. Outdoor Camera Installation .............................................................................................. 26

2.1 Standard / Compact Pendant Mounting ..................................................................... 26

3. Cable Gland Installation ..................................................................................................... 31

4. Mini Dome Mounting Kit Installation .................................................................................. 34

1. Indoor Camera Installation

1.1 Hard Ceiling

The Fixed Dome IP Camera can be installed directly on the wall or ceiling.

Please note that the wall or ceiling must have enough strength to support the IP

Dome Camera.

Items Needed:

 Vandal Proof / Lightweight Fixed Dome IP Camera

 Ethernet Cable

 DC Jack Cable (required without PoE)

 Self-tapping Screws (supplied)

 Rubber Washers (supplied)

 Plastic Screw Anchors (supplied)

Tools Needed:

 Tools for drilling

 (+,–) Screwdriver

Follow the steps below to install the IP Dome Camera:

Step 1:

Unpack the Vandal Proof / Lightweight Fixed Dome IP Camera package and

take out the IP Dome Camera.

Step 2:

Release the two Captive Security Screws with the supplied Security Torx and

open the Dome Cover.

Vandal Proof

Lightweight

Figure-1: Captive Security Screw

Vandal Proof

Lightweight

Step 3:

Press both sides of the Inner Cover and remove it from the Camera Module.

Vandal Proof

Lightweight

Step 4:

Unscrew the Module-fastened Screw with the screwdriver (as indicated in the

figures below).

Vandal Proof

Lightweight

Step 5:

Press the sides of the Snap-on Camera Module, and detach it from the Dome

Camera’s Housing / Plate, as indicated in the figures below.

Vandal Proof

Lightweight

Step 6:

Mark the positions of the four screw holes on the base of the Dome Camera at

the chosen installation location.

Vandal Proof

Type 1

Type 2

Lightweight

Step 7:

In the marked locations, drill each

hole slightly smaller than the supplied

Screw Anchors.

Step 8:

Put the supplied Anchors into these drilled holes.

Step 9:

Fasten the Dome Camera’s Housing / Plate with the four supplied Self-tapping

Screws.

Vandal Proof

Lightweight

NOTE: Be sure to fix the Self-tapping Screws with the Rubber

Washers.

Vandal Proof

Lightweight

Step 10:

Thread the cables (Power / Ethernet / Audio / Alarm) through either the side

conduit entry or back conduit entry, as illustrated below. Users may use a coin

to screw off the conduit entry block for Vandal Proof IP Dome Camera.

Side Conduit Entry

Back Conduit Entry

NOTE: The Power Cable is omitted if using PoE.

Step 11:

Connect the ports (on the Camera Module) with their cables / wires

respectively (as shown in the figures below).

Vandal Proof

Lightweight

Step 12:

Attach the Snap-on Camera Module into / on the Dome Camera Housing /

Plate, and screw the Module-fastened Screw tightly with the screwdriver to

secure the Camera Module.

NOTE: For Vandal Proof IP Dome Camera, please install the Camera

Module with the terminal blocks facing the side cable entry (as shown in

the left figure below).

Vandal Proof

Lightweight

Step 13:

Access the Camera Browser-viewer for viewing images. Please refer to User’s

Manual for further details. Users can also use the Camera’s BNC Connector for

video output while choosing BNC as one of the streaming options in advance.

Step 14:

Adjust the Camera’s Pan/Tilt Holder to a desired angle, as shown below. Pan

adjustment range is nearly 360°; rotation angle range approaches to 270°. Tilt

angle is adjustable between -10° ~ 90°.

Pan Adjustment

Tilt Adjustment

NOTE: Adjust the Lens carefully within the limits mentioned above, or

the cables underneath would be harmed.

Please tighten the Camera’s Pan/Tilt Holder Screw to secure the desired tilt

angle after adjusting.

Vandal Proof

Lightweight

Step 15:

Adjust the Camera's zoom level and focal length via Zoom and Focus Ring

Screws.

NOTE: The zoom level and focal length might be different with the

Dome Cover on. In this case, adjusting the zoom level and the focal

length through the Dome Cover is recommended.

Vandal Proof

Lightweight

Step 16:

Put the Inner Cover back to the Camera Module.

Vandal Proof

Lightweight

Step 17:

Replace the Dome Cover back.

For Vandal Proof IP Dome Camera, please align the arrow mark on the Dome

Cover with the one on the Housing (as shown in the left figure below).

For Lightweight Fixed Dome IP Camera, please align the arc area on the Dome

Cover with the back conduit entry (as shown in the right figure below).

Vandal Proof

Lightweight

Step 18:

Screw on the two Captive Security Screws on the side of the Dome Cover

tightly to fasten the Dome Cover. Camera installation is complete.

Vandal Proof

Lightweight

Altri manuali per W series

Indice

Altri manuali DynaColor Telecamera di sicurezza

DynaColor

DynaColor QIG-510 Series Manuale utente

DynaColor

DynaColor W-1 Manuale utente

DynaColor

DynaColor NH720 Series Manuale utente

DynaColor

DynaColor DH801 Manuale utente

DynaColor

DynaColor DH701 Manuale utente

DynaColor

DynaColor NH820 Series Manuale utente

DynaColor

DynaColor QIG-701-Series Manuale utente

DynaColor

DynaColor W series Manuale utente

DynaColor

DynaColor S3 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente