e-survey E500 Manuale utente
E500 User Manual
Web: www.esurvey-gnss.com Email: support@esurvey-gnss.com
Contents
1. Introduction ..........................................................................................................1
1.1 Appearance ...................................................................................................1
1.2 Indicator........................................................................................................1
1.3 Interface........................................................................................................2
1.4 Pin definition.................................................................................................2
1.5 Power button ................................................................................................3
2. Web User Interface............................................................................................... 3
2.1 Position .........................................................................................................4
2.2 Satellites........................................................................................................4
2.3 Information ...................................................................................................5
2.4 Working Mode ..............................................................................................5
2.5 Satellite Setting .............................................................................................6
2.6 Device Configuration.....................................................................................6
2.7 NMEA Message .............................................................................................7
2.8 View Logs ......................................................................................................7
2.9 Raw Data .......................................................................................................8
2.10 Backup Data ..................................................................................................8
2.11 Management.................................................................................................9
3. Basic Operation.....................................................................................................9
3.1 Insert SIM card.............................................................................................. 9
3.2 Charge the battery ........................................................................................9
3.3 Insert radio antenna ...................................................................................10
3.4 Measure antenna height.............................................................................10
3.5 Sensor .........................................................................................................10
3.5.1 E-bubble Calibration ...........................................................................10
3.5.2 MEMS Tilt Survey ................................................................................11
4. Internal Radio......................................................................................................12
4.1 Default channel frequency..........................................................................12
4.2 Supported radio protocol ...........................................................................13
5. Standard Accessories ..........................................................................................14
6. Technical Specifications ......................................................................................15
7. Warranty Policy...................................................................................................16
E500 User Manual
Web: www.esurvey-gnss.com Email: support@esurvey-gnss.com
1. Introduction
This is the user manual for survey E500 GNSS receiver. It gives basic description and
operation guide which may help user to operate device properly.
1.1 Appearance
The E500 main body is designed with magnesium alloy material to provide durable
usage and better heat dispersion as well as light weight 1000g. The internal battery
ensures up to 12-hours continuous working.
1.2 Indicator
Working status is viewable through the indicators. The meaning of each indicator
status:
Indicator
Color
Meaning
Breathing Light
Red
•Solid red: self-check fault
•Breathing red: battery level below 25%
•Flash red: GNSS Board communication is
abnormal
Green
•Add green on the base of original color
(Repeat every five seconds): Data are
recording (include static, base and rover
data)
Purple
•Solid purple: fixed solution
•Flash purple: datalink is transmitting data
normally
•Breathing purple: single solution
•Quickly flash purple: no solution status
Yellow
•Solid yellow: device is starting up
•Flash yellow: self-check
•Breathing yellow: firmware is updating
Blue
•From purple to blue: the Bluetooth is
connecting
Red, Green and
Blue combined
•Red-green-blue circulation: internal module
is updating (include network module
firmware, GNSS board firmware, sensor
firmware and UHF firmware)
Battery
Indicator
Green
•Four solid green: battery level between
75%~100%
E500 User Manual
Web: www.esurvey-gnss.com Email: support@esurvey-gnss.com
•Three solid green: battery level between
50%~75%
•Two solid green: battery level between
25%~50%
•One solid green: battery level below 25%
1.3 Interface
E500 GNSS receive bottom interface is shown as below. The 5-pin port is used to
connect external radio and external power, or output NMEA messages. Type-C port
can be used for data download (internal storage access) or charging.
1.4 Pin definition
The 5-pin port is defined as below:
5 Pin
Front View
1
+12V
Power
2
GND
Power ground
3
TXD
Device out
4
SGD
Signal ground
5
RXD
Device in
Battery Indicator
Power Button
Type-C Port
5-Pin Port
Nano SIM
Speaker
SIM Card
5-Pin UHF
UHF Radio
Type-C
E500 User Manual
Web: www.esurvey-gnss.com Email: support@esurvey-gnss.com
1.5 Power button
There is a power button on E500 control panel, the main function as below:
Power On
Long press button for three seconds then release
to power on receiver when it is powered off
Power Off
Long press button for three seconds, you'll hear
"power off?" then press the button again
Broadcast Current Working
Mode
Receiver will broadcast current working mode
when press the power button
Check the battery Level
Press power button, four battery indicator will light
according to battery level then extinguish after five
seconds
Self-check
Long press button for two seconds then release,
will hear the voice “Power off?” Then long press
button for three seconds, will hear the voice “self-
check”.
2. Web User Interface
User can connect to receiver WIFI hotspot with PC, smart phone or tablet. The hotspot
name is the device serial number, can be found under the bottom of the device label.
Open web browser and input the IP address “192.168.10.1”. The default password is
“password”. From the website, user can manage working status, change working
mode, configurate basic settings, download raw data, update firmware and register
device.
E500 User Manual
Web: www.esurvey-gnss.com Email: support@esurvey-gnss.com
2.5 Satellite Setting
Configurate the satellites to be used. “RTK Timeout” setting is for aRTK service (With
Hemisphere L-Band service, user cans still keep high accuracy for a period when
correction data loses). “Surefix” is hemisphere technology to increase the reliability
of the fixed solution. Which means it will be much more difficult to get fixed solution
in tough environment.
2.6 Device Configuration
Configurate receiver settings: User can set time zone. Sensor means MEMS sensor
data output. Also, the 5-pin port baud rate is changeable. Speaker “Smart voice
broadcast”can be disabled. When SIM card is insert and “WIFI share network” is
enabled, PC can surf the internet when connected to device hotspot by using SIM data.
E500 User Manual
Web: www.esurvey-gnss.com Email: support@esurvey-gnss.com
2.9 Raw Data
Download raw data or convert data to RINEX format. User can use check box, then
click “Package” to download multiple files.
2.10 Backup Data
The points collected in SurPad4.0 will be backup in receiver storage automatically to
avoid data loss. Can restore the data to SurPad software.
Altri manuali per E500
2
Indice
Altri manuali e-survey Ricevitore
e-survey
e-survey E300 Pro Manuale utente
e-survey
e-survey E100 Manuale utente
e-survey
e-survey E100 Manuale utente
e-survey
e-survey E600 Manuale utente
e-survey
e-survey E800 Manuale utente
e-survey
e-survey eRTK10 Manuale utente
e-survey
e-survey E200 Manuale utente
e-survey
e-survey E800 Manuale utente
e-survey
e-survey CORS System Net 20 Plus Manuale utente
e-survey
e-survey E200 Manuale utente
