EasyFold PRO 2.0 Manuale utente
Welcome 1
EasyFold PRO 2.0 Model Components 2
Specifications 3
Specification Diagram 4
General Safety 5
Maintenance 7
Install Setup 8
Controller 11
Basic operation 12
Charging Batteries 14
Free Wheel Mode 17
Transporting Your EasyFold PRO 2.0 18
Trouble Shootings 19
Diagnostics 20
Warranty 21
Congratulations on choosing the EasyFold PRO 2.0! You are now officially part of the EasyFold
family. The EasyFold PRO 2.0 will provide you with years of dependable service, with proper use
and care.
This manual is to assist you in operating and maintaining your EasyFold PRO. Please fully read and
understand all sections of this manual before operating your EasyFold PRO. After reading the
manual, if you have any questions or concerns, please feel free to contact us.
Do not attempt to charge or operate this vehicle until you have attained adequate knowledge of its
features and controls. Failure to operate the unit safely could result in serious injury or death and/or
damage to the vehicle and/or denial of warranty coverage.
In our constant efforts to improve and upgrade our products, your EasyFold PRO may incorporate
updated components and/or features that are not specifically covered by this version of the Owner’s
Manual. If you are not clear on how to operate or make use of any components or features, contact
EasyFold Canada for clarification. Product design, features, and specifications are subject to
change without notice.
We strongly believe that your new EasyFold PRO will provide you with the independence and
convenience that you have been looking for!
EasyFold Canada
Located in London, Ontario
1-855-444-8488
Disclaimer
EasyFold, its affiliates and partners, cannot be held responsible for personal injury or property
damage resulting from unsafe and improper operation or maintenance of the EasyFold portable
power wheelchair.
EasyFold Canada believes in constantly enhancing the product and its accessories for better
results. As a part of this ongoing product enhancement program, EasyFold has the right to change
specifications and design without notice. This may result in minor differences between the
EasyFold, its accessories and the photos, illustrations and instructions in this manual.
EasyFold PRO 2.0 Model Components
EasyFold - Pro 2.0 Model
A redesigned frame provides the EasyFold PRO 2.0 model with a higher maximum carrying
capacity (396 lbs), more seating room, and a higher top speed.
EasyFold PRO is composed of a very durable lightweight aluminum alloy, with 7.5” front wheels, 12″
rear wheels and two 250 Watt Brushless HUB motors to power them. You will be amazed at how
effortless it is to quickly fold this chair to a compact size. Unfolding is just as easy! The EasyFold
PRO comes with two removable LifePO4 Lithium-ion, 24V 6aH batteries and a maximum speed of 8
km/h.
Specifications
Model
EasyFold Pro 2.0
Material
Aluminum alloy
Unfold Size
940*650*975mm
Fold Size
650*350*775mm
Loading Capacity
150kg
Motor
250W*2pcs brushless motors
Battery
24V 6AH*2 pcs lithium battery
Max Speed
6km/hour
Driving Range
22KM
Front Wheels
8”*1.25” PU solid wheels
Rear Wheels
12.5”*2.125” PU solid wheels
Maximum Suggested
Climbing Slope
max 8°
Charging Time From
Empty
6-8 hours
Width of Armrest
510mm
Seat Width
470 mm
Seat Depth
400 mm
Seat Height
front 490mm/ back 470mm
Turning Radius
850mm
Net Weight Without
Battery
25.2kg
Net Weight With Two
Batteries
27.8kg
Drive Model
rear drive
Braking System
electromagnetic brake
Specification Diagram
General Safety
The safety of our customers is very important to us, so it is recommended to review the safety
instructions carefully. Always operate the EasyFold PRO, safely and according to directions. Should
you have any questions, please email [email protected] or call toll free 1-855-444-8488.
How to Read this Manual:
A “WARNING!” label indicates that failure to abide by the
following instructions may result in serious personal injury or
death to the rider or others, as well as damage to equipment.
A “CAUTION!” label indicates that failure to abide by the
following instructions may result in damage to your EasyFold and
related equipment and/or legal consequences and/or fines and/or
denial of warranty coverage.
A “Note:” label indicates information that is especially useful but
does not have safety consequences.
General Safety Procedures
Adjust EasyFold PRO wheelchair to your personal comfort level as much as possible.
Take time to learn how the EasyFold PRO operates in a private space before operating
outdoors/large spaces.
Practice bending, reaching and transferring in and out of the EasyFold PRO.
Always be aware of your surroundings when operating.
If unsure as to whether the EasyFold PRO can surpass an obstacle, find an alternate route.
The EasyFold PRO is designed for a single user only; more than one user may result in personal
injury.
Ensure components such as the joystick, battery charger and other electronic components avoid
moisture.
If components come into contact with moisture, dry it before use.
The EasyFold PRO seat is designed for comfort, not specifically for pressure relief; if any concerns,
please consult a physician.
Pre-Operating Safety Procedures
It’s important to maintain the EasyFold PRO. Failure to maintain could increase risk for injury.
Before sitting, make sure the EasyFold PRO is turned OFF. This will ensure the EasyFold PRO will
not move upon transferring on and off the unit.
Ensure the footrest is down.
Make sure feet are safely rested on the footrest.
Check for any unusual noises, vibration, or changes in the ease of use; if a problem is detected, use
the tool kit to perform maintenance or get in touch with us directly through phone or email.
Operating Safety Procedures
Always remain alert and aware of motor vehicles on roads or in parking lots.
At night, or when it is difficult to see, it is suggested to use reflective tape on the EasyFold PRO.
EasyFold PRO is designed for use on firm, even surfaces such as concrete, asphalt or indoor
flooring.
Do not operate the EasyFold PRO in sand or loose soil. This could damage the wheels, bearings,
axles or motors, and may loosen fasteners.
Safe Exit Procedures
Ensure that you bring the EasyFold PRO to a full and complete stop, prior to exiting.
Turn OFF the unit to avoid the wheelchair moving when transferring.
Raise the armrest carefully and transfer from the seat.
Maintenance
It is important to perform regular maintenance of your EasyFold PRO 2.0 for longevity and warranty
eligibility. Even a little cleaning now and then will go a long way to keep your device looking and
functioning like new.
Certified repair shops with trained professionals who specialize in electric wheelchairs and scooters
will be qualified to perform the service and maintenance on your EasyFold PRO 2.0.
We recommend you inspect your EasyFold two or three times per year in the following areas:
(1) Frame: Tighten loose screws as necessary using the tool kit included with your EasyFold
PRO 2.0.
(2) Wheels: Make sure they rotate easily. Significant resistance may require new bearings.
(3) Armrest: Look for excessive wear or if they are loose.
Replacement parts and more major maintenance issues should be done by a professional.
◎ Batteries
(1) Use batteries that have been supplied by EasyFold; our batteries are special lithium
batteries designed specifically for use in the EasyFold PRO 2.0.
(2) Read all battery instructions before attempting to change or charge batteries.
(3) When you haven’t driven the wheelchair for a long time, please ensure the battery is
charged once every month to avoid decreasing battery life.
◎ Fasteners
Many of the screws, bolts and nuts on the PRO 2.0 are special high-strength fasteners. Replacing
these fasteners with non-approved parts may cause your Fold Power Wheelchair D10 to result in
faulty operation and may cause harm to you or other people, therefore:
A. Use fasteners that have been supplied by EasyFold.
B. Using the tools included with your EasyFold PRO 2.0, tighten any fasteners that become
loose as soon as possible.
◎ Change and Adjustments
Never use non-EasyFold PRO 2.0 parts or make changes to your PRO 2.0 unless authorized in
writing by a representative from our company. Doing so will void the warranty and may create a
safety hazard.
Altri manuali per PRO 2.0
1
Indice
Altri manuali EasyFold sedia a rotelle
