EchoStar Hughes 9410 Manuale utente

Hughes 9410 Mobile Satellite

Terminal

Installation Guide

H67706

Revision C

May 1, 2023

11717 Exploration Lane, Germantown, MD 20876

Phone (301) 428-5500 Fax (301) 428-1868/2830

LLC. No part of this publication may be reproduced in any form or by any means without the

written permission of Hughes Network Systems, LLC, 11717 Exploration Lane, Germantown,

Maryland 20876.

Hughes Network Systems, LLC has made every effort to ensure the correctness and completeness

of the material in this document. Hughes Network Systems, LLC shall not be liable for errors

contained herein. The information in this document is subject to change without notice. Hughes

Network Systems, LLC makes no warranty of any kind with regard to this material, including, but

not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Trademarks

HUGHES and Hughes Network Systems are trademarks of Hughes Network Systems, LLC. All other

trademarks are the property of their respective owners.

Contents

H67706 Revision C

Contents

Understanding safety alert messages .................................................... 5

Chapter 1

Introduction ........................................................................................... 7

1.1 Hughes 9410 mobile satellite terminal.........................................................7

1.1.1 Terminal physical dimensions ..............................................................7

1.1.2 Package Material and accessories available.........................................8

1.1.3 Accessories available............................................................................8

1.1.4 Power port............................................................................................9

1.1.5 System power requirements ................................................................9

1.1.6 SIM card..............................................................................................10

Chapter 2

Custom cable connections .................................................................... 11

2.1 Adding an RJ45 connector to the power cable...........................................11

Chapter 3

Vehicular installation............................................................................ 13

3.1 Basic installation procedure .......................................................................13

3.2 Installation notes ........................................................................................13

3.3 Permanent mount installation....................................................................13

3.3.1 Installation..........................................................................................13

3.3.2 Drainage of the antenna.....................................................................16

3.3.3 Cleaning ..............................................................................................16

3.4 Magnetic mounting (optional)....................................................................16

Understanding safety alert messages

H67706 Revision C

Understanding safety alert messages

H67706 Revision C

Understanding safety alert messages

Safety alert messages call attention to potential safety hazards and tell you how to

avoid them. These messages are identified by the signal words DANGER, WARNING,

CAUTION, or NOTICE, as illustrated below. To avoid possible property damage,

personal injury, or in some cases possible death, read and comply with all safety

alert messages.

Messages concerning personal injury

The signal words DANGER, WARNING, and CAUTION indicate hazards that could

result in personal injury or in some cases death, as explained below. Each of these

signal words indicates the severity of the potential hazard.

WARNING indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided,

could result in minor or moderate injury.

Messages concerning property damage

A NOTICE concerns property damage only.

NOTICE is used for advisory messages concerning possible property damage,

product damage or malfunction, data loss, or other unwanted results—but not

personal injury.

Understanding safety alert messages

H67706 Revision C

Safety symbols

The generic safety alert symbol

calls attention to a potential personal injury hazard. It appears next to the DANGER,

WARNING, and CAUTION signal words as part of the signal word label. Other

symbols may appear next to DANGER, WARNING, or CAUTION to indicate a specific

type of hazard (for example, fire or electric shock). If other hazard symbols are used

in this document, they are identified in this section.

Chapter 1 • Introduction

H67706 Revision C

Chapter 1

Introduction

The purpose of this guide is to instruct personnel on how to install the Hughes 9410

mobile satellite terminal in a vehicle.

This product must be installed by authorized service personnel.

Damages resulting from the failure to conform to the instructions found

herein, as well as standard installation practices, will be the responsibility of

the installer.

1.1 Hughes 9410 mobile satellite terminal

The 9410 is a fully integrated land mobile class 11 satellite terminal with Ethernet

and WLAN interfaces.

Figure 1. 9410 mobile satellite terminal (integrated modem and antenna)

The Hughes 9410 has a single connector for power and Ethernet (no cable included

with the terminal). There are two versions of the 9410, each with different

interfaces. See the variants listed in Table 1.

Table 1. 9410 variants

9410 Version

Hughes P/Ns

Interfaces

9410LW

3501431-0003

Ethernet, WLAN

9410L

3501431-0002

Ethernet

1.1.1

Terminal physical dimensions

Size: 270 mm x 150 mm

Weight: 3.0 kg

Chapter 1 • Introduction

H67706 Revision C

1.1.2

Package Material and accessories available

The 9410L or 9410LW is shipped in a box containing only the mobile satellite

terminal, with no accessories.

1.1.3

Accessories available

Various accessories like data and power cables are available in the Hughes catalog.

Several accessories (ready-made cables, custom cables, connectors and mounting

hardware) are available for connecting the 9410. See the details below.

1. Power and data cable, blunt wire, 5 m (P/N: 3501314-0002)

2. Power and data cable, blunt wire, 10 m (P/N: 3501314-0003)

3. Power and data cable, cigarette lighter plug and RJ45 socket, 5 m

(P/N: 3501314-0004)

4. Custom power and data cable, 100 m (P/N: 9509897-0001)

5. Magnetic Mounts (P/N: 3501152-0002)

6. RJ45 Wiring Block (P/N: 9510250-0002)

7. Mating power and data connector, bare (P/N: 9509554-0001)

Please refer to the Hughes catalog for further details:

https://www.hughes.com/products-and-technologies/satellite-ground-

systems/mobile-satellite-terminals/hughes-bgan-satellite-terminals

Chapter 1 • Introduction

H67706 Revision C

1.1.4

Power port

The power port is the connection from the power supply (vehicle battery or another

12 VDC power source) to the satellite terminal. The power cable has a +V power

line, an ignition sense line, and a –V power line.

Figure 2. 9410 power and data port connector pinout

Table 2. Pinout details

Wire Color

Description

White

Remote switch/ Ignition Sense

Black

GND

Red

PWR 12 VDC

Green

ENET-RXN

White/green

ENET-RXP

Orange

ENET-TXN

White/orange

ENET-TXP

Yellow

Not used

1.1.5

System power requirements

There is one power connection on the terminal. This must be connected to a 12 VDC

power supply.

Power requirements and consumption are listed in Table 3.

Table 3. System power requirements

Voltage Input

Minimum

Voltage Input

Maximum

Power Draw

Idle

Power Draw

Maximum

9 VDC

20 VDC

15 W

50 W

Chapter 1 • Introduction

H67706 Revision C

1.1.6

SIM card

The satellite terminal requires an Inmarsat SIM to be installed.

In order to install the SIM, unscrew the six M3 screws using a Torx 10 screwdriver

and carefully lift up the radome, as shown in Figure 3 on page 10. Please note that

the torque value for this type of screw is 0.6–0.8 Nm.

Note: Before removing the radome please make sure the terminal is disconnected

from the power.

Insert the SIM (supplied by the dealer) into the SIM card holder with the metal

contacts facing down. You will hear a click once the SIM card is correctly inserted.

The SIM card will protrude slightly from the metal casing, as shown in Figure 4.

Figure 3. Removing the radome

Figure 4. Installing the SIM card

Carefully replace the radome and reinstall the screws with a torque setting of 0.6––

0.8 Nm.

SIM

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali EchoStar Terminale touch

EchoStar

EchoStar Hughes 45 Series Manuale utente

EchoStar

EchoStar immarsat BGAN Patrol 9203 Manuale utente

EchoStar

EchoStar Hughes 4510 Manuale utente

EchoStar

EchoStar HUGHES BGAN Patrol Manuale utente

EchoStar

EchoStar inmarsat Hughes 9450 Series Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente