Ecom Ident-Ex 01 Istruzioni per il montaggio

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

1 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

Index

1 Overview.......................................................................................................................................... 3

2 Displaying firmware information .................................................................................................. 3

3 Resetting to default settings......................................................................................................... 3

4 Bluetooth Pairing of Ident-Ex and PC .......................................................................................... 3

5 Bluetooth pairing of Ident-Ex and Android device ..................................................................... 4

6 Deleting/establishing a connection.............................................................................................. 5

7 Firmware Update ............................................................................................................................ 5

7.1 Bootloader................................................................................................................................. 5

7.2 Launching the bootloader on the Ident-Ex................................................................................ 6

7.3 Installing new firmware for the Ident-Ex (by using a PC without Ident-Ex Setup)..................... 6

7.3.1 Bluetooth connection between Ident-Ex and HyperTerminal............................................. 6

7.3.2 Installing new firmware....................................................................................................... 8

7.4 Installing new Firmware on Ident-Ex (with PC and Ident-Ex Setup)....................................... 13

7.5 Installing new Firmware on Ident-Ex (with mobile device)...................................................... 13

8 „Ident-Ex Setup“ Windows .......................................................................................................... 13

8.1 Generic.................................................................................................................................... 13

8.2 Settings.................................................................................................................................... 13

8.3 Load file................................................................................................................................... 14

8.3.1 Generic............................................................................................................................. 14

8.3.2 Load default settings........................................................................................................ 14

8.3.3 Load other settings........................................................................................................... 14

8.4 Save file................................................................................................................................... 14

8.5 Bluetooth connection............................................................................................................... 14

8.5.1 Bluetooth connection of Ident-Ex and PC........................................................................ 14

8.5.2 Connecting ....................................................................................................................... 15

8.6 Transfer data to Ident-Ex......................................................................................................... 16

8.7 Read data from Ident-Ex......................................................................................................... 17

8.8 Online Mode............................................................................................................................ 18

8.9 Installing new Firmware........................................................................................................... 18

8.10 Device Info............................................................................................................................. 20

8.11 Memory.................................................................................................................................. 21

8.11.1 Memory size................................................................................................................... 21

8.11.2 Readout data.................................................................................................................. 22

8.11.3 Delete data..................................................................................................................... 22

8.11.4 Data export..................................................................................................................... 23

8.12 About..................................................................................................................................... 23

9 „Ident-Ex Setup“ Android ............................................................................................................ 24

9.1 Generic.................................................................................................................................... 24

9.2 Settings.................................................................................................................................... 24

9.3 Load file................................................................................................................................... 25

9.3.1 Generic............................................................................................................................. 25

9.3.2 Load default settings........................................................................................................ 25

9.3.3 Load other settings........................................................................................................... 25

9.4 Save file................................................................................................................................... 25

9.5 Bluetooth connection............................................................................................................... 26

9.6 Transfer data to Ident-Ex......................................................................................................... 28

9.7 Installing new Firmware........................................................................................................... 29

9.8 About....................................................................................................................................... 32

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

2 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

10 Annex A....................................................................................................................................... 33

10.1 General Ident-Ex settings...................................................................................................... 33

10.2 Settings for the UNI900 head module................................................................................... 39

10.3 Settings for the EX25i head module...................................................................................... 41

10.4 Settings for the TLB30 head module..................................................................................... 41

10.5 Settings for the UNI13 head module..................................................................................... 42

10.6 Settings for the SE955 head module .................................................................................... 44

11 Annex B....................................................................................................................................... 58

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

3 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

1 Overview

This Software Manual will show all information’s and handling of the Ident-Ex and the “Ident-Ex Setup”

software for Android and Windows.

2 Displaying firmware information

If the main trigger (trigger button on the underside), trigger (trigger button on the top) and SPP buttons are

pressed during operation, firmware information will be sent to a device that has been connected to the Ident-

Ex via Bluetooth (HID), where it is displayed. It must be ensured that the SPP button is pressed first, followed

by the main trigger and the trigger button. When releasing, the SPP button must be released before the main

trigger and trigger buttons.

The following information’s are transmitted:

Bootloader version

Firmware version

Version of the Bluetooth module used by the Ident-Ex

Address of the Bluetooth module used by the Ident-Ex

The 5 saved Bluetooth addresses of devices which have already been connected to the Ident-Ex via

Bluetooth.

Firmware information of the head module

3 Resetting to default settings

The firmware of the Ident-Ex can be used to reset the device to its factory settings. To enable this function,

the main trigger (trigger button on the underside), trigger (trigger button on the top) and SPP buttons must be

pressed and held for approx. 2 seconds when the Ident-Ex is starting up. Previous settings, such as

selection of the head module, main trigger and trigger button were not resetted and are retained.

4 Bluetooth Pairing of Ident-Ex and PC

If the Ident-Ex has not yet been paired with a PC, a pairing process must be performed before a Bluetooth

connection can be established between the Ident-Ex and PC. The Ident-Ex is using the SSP-Mode (Secure

Simple Pairing), in this case no pairing-password is required to pair with a device (Smartphone/Tablet or

PC).

Select the Bluetooth name of the Ident-Ex via Start -> Control Panel -> Hardware and Sound -> Add a

Bluetooth device. The PC is now paired with the Ident-Ex and a Bluetooth connection can be established. A

Bluetooth connection (HID) may be established automatically after the pairing process. This is indicated by

the illuminating Bluetooth LED on the Ident-Ex (the SPP LED is off). However, since we need to establish a

Bluetooth connection in SPP to install firmware, an existing HID Bluetooth connection must be deleted. To

do this, press and hold the SPP button on the Ident-Ex for approx. 2 seconds until the Bluetooth LED goes

out. An SPP Bluetooth connection can now be established.

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

4 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

5 Bluetooth pairing of Ident-Ex and Android device

Pairing without „Ident-Ex Setup“ App:

„Settings“ „Bluetooth“ select Ident-Ex01 Ident-Ex01 and Smartphone/Tablet will be paired

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

5 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

Pairing with the „Ident-Ex Setup“ App:

See 9.5 Bluetooth connection.

6 Deleting/establishing a connection

If you press and hold the SPP button for 2 seconds, an existing Bluetooth connection can be closed or a new

Bluetooth connection can be established with one of the 5 saved Bluetooth addresses (if a Bluetooth

connection is not available).

The following 3 scenarios are possible:

Initial state –there is no Bluetooth connection

If you press and hold the SPP button for 2 seconds, the Ident-Ex will attempt to establish a connection with

the device to which it was last connected. If you continue to hold the SPP button and a Bluetooth connection

cannot be established to the device it was last connected to, it will attempt to connect to the next of the 5

saved Bluetooth address. This will continue to happen every 5 seconds for as long as the SPP button is

depressed and a Bluetooth connection cannot be established.

Initial state –a Bluetooth connection (HID) has been established between the Ident-Ex and a terminal

If the SPP button is depressed for 2 seconds, the Bluetooth connection to the device will be closed.

Initial state –a Bluetooth connection (SPP) has been established between the Ident-Ex and a terminal

If the SPP button is depressed for 2 seconds, the Bluetooth connection (SPP) will be deleted and the device

will attempt to establish a Bluetooth connection (HID) with the device to which it was last connected.

7 Firmware Update

7.1 Bootloader

New firmware can be installed for the Ident-Ex via the bootloader. New firmware can be transferred to the

Ident-Ex from a PC or mobile device (e.g. smartphone or tablet) via Bluetooth.

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

6 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

7.2 Launching the bootloader on the Ident-Ex

In order to install new firmware on the Ident-Ex, the Ident-Ex must be set to a certain state, namely the

bootloader. The bootloader can be launched by pressing and holding the triggers and SPP button when

switching on the Ident-Ex. It must be ensured that the Ident-Ex was previous switched off before launching

the bootloader.

The bootloader starts to run on the Ident-Ex as soon as the buttons are released (a light on the battery

display changes from red to yellow to green).

7.3 Installing new firmware for the Ident-Ex (by using a PC without Ident-Ex Setup)

7.3.1 Bluetooth connection between Ident-Ex and HyperTerminal

If the PC has been paired with the Ident-Ex, a Bluetooth connection (SPP) can be established via the

HyperTerminal program. For this purpose, we need to know which COM port is being used for the Bluetooth

connection. This information can be viewed by selecting Start -> Control Panel -> Hardware and Sound ->

Device Manager and then the Ports (COM & LPT) section.

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

7 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

We can now use this information to establish a Bluetooth connection with the Ident-Ex via the HyperTerminal

program. Open the HyperTerminal program on your PC. Start by assigning a name for the connection. This

name can be freely selected (confirm by pressing OK).

In the next step, select the COM port that you want to use for the Bluetooth connection (confirm by pressing

OK).

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

8 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

If everything was successful, the SPP and Bluetooth LEDs on the Ident-Ex will illuminate. These two LEDs

must illuminate, otherwise firmware cannot be installed on the Ident-Ex.

All of the necessary steps are now complete and new firmware can be installed on the Ident-Ex.

7.3.2 Installing new firmware

There are two methods of installing new firmware on the Ident-Ex. These two methods are described in the

following two sections. The new firmware to be installed must be available as a file. A Bluetooth connection

must have been established in the SPP mode before new firmware can be installed on the Ident-Ex (SPP

and Bluetooth LEDs must illuminate).

7.3.2.1 by pressing the trigger button (button on the top of the device)

The trigger button (button on the top of the device) can be used to start the process of installing new

firmware on the Ident-Ex. The file containing the new firmware must be selected first, however. The file with

the firmware can be selected in the HyperTerminal program via Transfer -> Send File…. A new window

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

9 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

opens, in which the file can be selected. Select the file by pressing Browse…. After selecting the file, the

protocol will need to be selected. Select the 1K XModem protocol here.

The file can then be sent by pressing the Send button. Pressing the trigger button now (button on the top)

will start the process of installing the firmware on the Ident-Ex.

The yellow LED on the Ident-Ex battery display flashes when data is being transferred. The LED flashes until

the transfer is complete or until an error occurs.

Datum // date

30.03.2017

Teile-Nr. // part no.

300030

Dokument-Nr. Revision //

document no. revision

300030AL06E 04

Software Manual

Ident-Ex 01

Seite/gesamt // page/total

10 / 60

Dokument erstellt // document created

OSJ398 30.03.2017

Dokument geprüft // document checked

FIH091 30.03.2017

Ident-Ex 01: Software Manual

● Ablageort: W:\300030\070_Marketingunterlagen\07020_Bedienungsanleitungen\300030AL06Axx\300030AL06E04_IdentEx_Software.docx

●template no.: 0730QV06A03 ●template created: HAO006 20.01.2011 ●template checked: BEA373 20.01.2011 ● location: ISO drive ●

If the transfer was successful, the green LED on the Ident-Ex battery display will illuminate briefly and then

go out again.

The new firmware will start and we now exit the bootloader.

If something went wrong during the data transfer process, the new firmware will not be able to be started and

we remain in the bootloader (the light on the battery display changes from red to yellow to green). If this

occurs, the firmware will have to be reinstalled and a new data transfer process must be started. If the

Bluetooth connection is lost when transferring firmware data (the SPP and Bluetooth LEDs are off), a new

Bluetooth connection will need to be established before a new transfer process can be started.

Altri manuali per Ident-Ex 01

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ecom Lettore di codici a barre

Ecom

Ecom Ident-Ex 01 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente