5
REMOTE CONTROLLER
SPLIT AIR CONDITIONER
EADM
6
7
8
9
10
11
NOTE
4
5
Please do not select HEAT mode lithe machine you purchased is cooling only type. Heat
mode is not supported by the cooling only appliance.
SWING Button: Push this switch button to activate auto swing feature of the
horizontal louver. Push it again to stop.
RESET Button: When you press the recessed RESET button, all current settings are
cancelled and the control will return to the initial settings.
AIR DIRECTION Button: Press this button to change the swing angle of the louver.
The swing angle of the louver is 6º for each press. When the louver swing at a certain
angle which would aect the cooling and heating eect of the air conditioner, it
would automatically change the swing direction. No symbol will appear in the
display area when press this button. (Not applicable to units without this function).
LED DISPLAY Button: Press this button to clear the digit display in the air
conditioner, press it again to to activate it (Not available for the units without LED
display window).
FAN SPEED Button: Used to select the Fan Speed in four steps AUTO, LOW, MED or
HIGH. Each time the button is pressed, the fan speed mode is shifted.
ON/OFF Button: Push this button to start operation, push the button again to stop
operation.
TIMER ON Button: Press this button to initiate the auto-on time sequence. Each
press will increase the auto-timed setting in 30 minutes increments. When the
setting time displays 10, each press will increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program, simply adjust the auto-on time to
0.0.
SLEEP Button: Press this button to go into the Energy-Saving operation mode.
Press it again to cancel. This function is only can be used on COOL, HEAT and AUTO
mode and maintain the most comfortable temperature for you.
TIMER OFF Button: Press this button to initiate the auto-o time sequence. Each
press will increase the auto-timed setting in 30 minutes increments. When the
setting time displays 10, each press will increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program, simply adjust the auto-o time to
0.0.
LOCK Button: When you press the recessed LOCK button, all current settings are
locked in and the remote controller does not accept any operation except that of
the LOCK. Press again to cancel the LOCK mode.
12
13
