EGig EG32T Manuale utente

10 / 100M

FDX

10 / 100M

FDX

LINK / ACT

POWER

RESET

1357

17 19 21 23 25 27 29 31

2468

20 22 24 26

911 13 15

14 16 18

28 30 32

1357

2468

911 13 15

18 20 22 24

10 12 14 16

17 19 21 23

26 28 30 32

25 27 29 31

32 Port Nway Fast Ethernet Switch

User's Manual

FCC Warning

This device has been tested and found to comply with limits for

a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses

and radiates radio frequency energy and, if not installed and

used in accordance with the user's manual, may cause

interference in which case user will be required to correct the

interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this

product may cause radio interference in which case the user

may be required to take adequate measures.

Table Of Contents

Chapter 1 -------------------------------------------------------------------1

Introduction---------------------------------------------------------------------1

Key Features -------------------------------------------------------------------2

Chapter 2 -------------------------------------------------------------------3

Package Contents ------------------------------------------------------------3

Chapter 3 -------------------------------------------------------------------4

Front Panel Layout -----------------------------------------------------------4

32 RJ-45 10/100Mbps Switch Ports --------------------------------4

LED Indicators of 24 Port 10/100Mbps Switch--------------5

Reset----------------------------------------------------------------5

LED Definitions ----------------------------------------------------------6

Power LED --------------------------------------------------------------6

FDX LED -----------------------------------------------------------------6

10/100M LED -----------------------------------------------------------6

LINK/ACT LED ---------------------------------------------------------6

Rear Panel Layout ----------------------------------------------------------6

AC input-------------------------------------------------------------------6

Chapter 4 -------------------------------------------------------------------7

RackMounting-----------------------------------------------------------------7

Chapter 5 -------------------------------------------------------------------8

Installation ----------------------------------------------------------------------8

TheconnecttheSwitchtoPCs,servers,andother

network devices.---------------------------------------------------------8

The connect the Switch to a Switch or a Hub --------------------8

Chapter 6 ------------------------------------------------------------------9

Technical Specifications ----------------------------------------------------9

Appendix------------------------------------------------------------------11

ANSI/TIA/EIA-568-A PLUG & Twisted-pair Cable -------------11

EIA568A pin assignment ---------------------------------------------11

Recommend CAT5 UTP specifications ---------------------------11

Physical:---------------------------------------------------------------11

Electrical:--------------------------------------------------------------11

Recommend CAT5 UTP specifications ---------------------------12

II.

III.

IV.

II.

III.

IV.

Chapter 1

32 Port Nway Fast Ethernet Switch

Introduction

The Switch provides 32 10/100Mbps ports. The Switch was designed

for easy installation and high performance in an environment where

traffic on the network and the number of user increase continuously.

The 19-inch standard rack-mount size was specifically designed for

ROBO (Remote Office & Branch Office) and medium to large

workgroups. The Switch can be installed where space is limited;

moreover it provides smooth network migration and easy upgrade to

network capacity.

-1-

10 / 100M

FDX

10 / 100M

FDX

LINK / ACT

POWER

RESET

1357

17 19 21 23 25 27 29 31

2468

20 22 24 26

911 13 15

14 16 18

28 30 32

1357

2468

911 13 15

18 20 22 24

10 12 14 16

17 19 21 23

26 28 30 32

25 27 29 31

Key Features

32 Port 10/100BASE T/TX Nway (Auto-negotiation)

Switch with RJ-45 connectors

19-inch standard Rack-mount size

Auto-detect of Full/Half-duplex modes in all ports

Dedicated full-duplex 200Mbps bandwidth on each

port

Broadcast storm control

Store & Forward switching methods

IEEE 802.3x flow control for Full-duplex

Non-blocking & Non-head-of-line blocking full wire

speed forwarding

Auto-learning of networking configurations

Status LEDs: Power, Speed, Link/Activity And

Full/Half-duplex

Provided front panel reset button

All port support Auto-MDIX crossover capability

Smart plug & play

-2-

Chapter 2

Package Contents

Before you start to install the Switch, please verify your package that

contains the following items:

One Fast Ethernet Switch

Rack-mount Kit For Rack Installation

One Power Cord

One User's Manual

Note: If any of these items is found missing or damaged, please

contact your local supplier for replacement.

-3-

32 Port Nway Fast Ethernet Switch

User's Manual

32 Port Switch

Power Cord

Rack-mount Kit

User's Manual

10 / 100M

FDX

10 / 100M

FDX

LINK / ACT

POWER

RESET

135717 19 21 23 25 27 29 31

246820 22 24 26

911 13 15

14 16 18 28 30 32

1357

2468

911 13 15

18 20 22 24

10 12 14 16

17 19 21 23

26 28 30 32

25 27 29 31

10/100M

FDX

10/100M

FDX

LINK/ ACT

POWER

RESET

135717 19 21 23 25 27 29 31

246820 22 24 26

91113 15

14 16 18 28 30 32

1357

2468

91113 15

18 20 22 24

10 12 14 16

17 19 21 23

26 28 30 32

25 27 29 31

Chapter 3

Front Panel Layout

I. 32 RJ-45 10/100Mbps Switch Ports

There are 1~32 RJ-45 connectors on the front panel for connecting

to servers, workstation or other devices. The Switch provides 32

10/100Mbps switching ports that could sense the 10/100M speed

and negotiate Full/Half-duplex mode automatically. These switching

ports allow users connect the Switch to 10Base-T and 100Base-TX

devices.All ports support Auto MDIX crossover capability.

-4-

10 / 100M

FDX

10 / 100M

FDX

LINK / ACT

POWER

RESET

1 3 5 7 9 11 13 15 17 19 21 23

2 4 6 8 10 12 14 16 18 20 22 24

25 27 29 31

26 28 30 32

9 11 13 15

10 12 14 16

17 19 21 23

26 28 30 32

18 20 22 24

25 27 29 31

Reset

1 3 5 7

2 4 6 8

RJ-45 Port

LED Display

II. LED Indicators of 32 Port 10/100Mps Switch

LED Color Status Description No. Of LED

Power Yellow On Power on 1

FDX Green On Full-duplex 32(1~32)

Off Half-duplex 32(1~32)

Flashing Partial collision 32(1~32)

occurs

10/100M Green On Port is on the 32(1~32)

100M status

Off Port is on the 32(1~32)

10M status

LINK/ACT Yellow On 10/100Mbps port 32(1~32)

for connection

Flashing 10/100Mbps for 32(1~32)

data activating

III. Reset

Allows the users refresh Automatic-learning of network configuration.

-5-

10 / 100M

FDX

10 / 100M

FDX

LINK / ACT

POWER

RESET

1 3 5 7 9 11 13 15 17 19 21 23

2 4 6 8 10 12 14 16 18 20 22 24

25 27 29 31

26 28 30 32

Yellow

Green

IV. LED Definitions

Power LED

On : The unit is powered on and ready for use.

Off : The unit is powered off.

FDX

On : The port is operating at Full-duplex.

Off

Flashing : Collisions occurred and the port is

operating at Half-duplex mode.

10/100M LED

On : The port is on the 100Mbps status.

Off : The port is on the 10Mbps status.

LINK/ACT LED

On : The port is ready for 10/100Mbps 

connection

Flashing : The data is transmitted or received on

the port.

Rear Panel Layout

AC input

AC input (90~260V/AC, 50~60Hz) UL Safety..

-6-

: The port is operating at Half-duplex

without any data being transmitted or

received.

OFF 50~60Hz

ON 90~260VAC

Chapter 4

Rack Mounting

Optional Rack-mounting brackets are available to mount Switch in

standard EIA 19-inch rack. 32 port 10/100Mbps Switch is supplied

with two mounting brackets, eight screws.

First, put the Switch on the flat surface. Locate the mounting bracket

on the sides of the Switch with the mounting holes on each. Next,

insert the screw through the bracket and into the bracket mounting

holes in the Switch. Then, place the Switch in to 19-inch rack.

-7-

Indice

Altri manuali EGig Router di rete

EGig

EGig eG24T Manuale utente

EGig

EGig eG2G24T Manuale utente

EGig

EGig eG5TS Manuale utente

EGig

EGig XW305K Manuale utente

EGig

EGig eG8TS Manuale utente

EGig

EGig eG4TR Manuale utente

EGig

EGig eG16T Manuale utente

EGig

EGig eG8T Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

EGig eG32T Manuale utente

Manuali Router di rete popolari di altre marche