EHUOYAN ER719 Manuale utente
ER719
User Manual
Version 1.0 Page 1 of 11 Apr 2022
ER719
User Manual
Ordering Information
Model No. ER719
Name NFC Reader Writer
Interface VCP(HID, RS232,RS485 optional)
Phone 86-010-80218328
Email [email protected]
Web http://www.ehuoyan.com/
ER719
User Manual
Version 1.0 Page 2 of 11 Apr 2022
1. Overview
The ER719 NFC Writer is a PC-linked contactless smart card reader/writer
developed based on the 13.56 MHz Contactless (RFID) Technology. It supports
MI FARE®1k, MI FARE®4k, MI FARE Ultralight®, NTAG213, NTAG216 and ISO
14443A compatible cards.
ER719 use USB port to act as a virtual COM port. The proximity operating distance
of ER719 is up to 5cm, depending on the type of contactless tag in use.
The ER719 is ideal for secure personal identity verification, access control,
e-payment, e-ticketing for events and mass transit, toll road fare collection and
network authentication.
2. Special Features
zSupport card: MI FARE®1k, MI FARE®4k, MI FARE Ultralight®, NTAG213
zRF Frequency: 13.56 MHz.
zTypical time of command：<100ms
zOperating distance: up to 5cm
zCommunications Interface: USB(VCP default,HID/ RS232/RS485 Optional)
zDual LEDs indicator (software controlled)
zBuzzer alarm (software controlled)
zMechanic characteristics:
- Size: 114 ×74× 16 (mm)
- Cable length: 1.5m(Optional)
- Weight: 70g (not include cable)
3. Technical Specifications
ER719
User Manual
Version 1.0 Page 3 of 11 Apr 2022
Dimensions 114 mm (L) x 74 mm (W) x 16 mm (H)
Weight 70 g
Cable length 1.5m(optional)
Color Black( White optional)
Interface USB (VCP default, HID/RS232/RS485 Optional)
Baud rate 115200 bps (default, 9600-115200bps optional)
Operating Distance Up to 5cm (depends on the tag type and size)
Supply Voltage 5V DC defalut (up to 14V optional)
Supply Current 45mA (operating); 25mA (close port); 120mA (maximum)
Operating Temperature -10~50 °C
Storage Temperature -20~70 °C
Operating Frequency 13.56 MHz
RF Speed 212 kbps
Smart Card Supported MI FARE®1k, MI FARE®4k, MI FARE Ultralight®, NTAG213
Operating System Windows, Linux, Android
4. Typical Applications
9E-Payment
ER719
User Manual
Version 1.0 Page 4 of 11 Apr 2022
9E-Healthcare
9E-Game
9E-Government
9E-Ticketing
9Access Control
9Network Login
9Transportation
9Loyalty Program
5. How to use
Step1:
Connect the cable to the ER719 connector J1(shown on above).
Step2:
Connect the USB connector to PC( or other smart host device, if RS232 or RS485 interface
please reference your host’s connector) USB port( if you use a smart pad or phone, then you
may need to use an OTG converter for it) . Shown as below.
ER719
User Manual
Version 1.0 Page 5 of 11 Apr 2022
After power on the blue led will flash one time, then the buzzer will beep one time, at last
the red led will light on, this means that the device is ready now.
Step3:
Now, you can run the program to send commands to the ER719 (if works on reader
mode then you can open a text file to receive the data for test). You can run the
eReader.exe or else App(base on the ER719 API) to communicate with the ER719.
On writer mode, you can send commands to control the ER719 to read or write
data with the NFC(RFID) cards and control the LEDs and beep.
ER719
User Manual
Version 1.0 Page 6 of 11 Apr 2022
6. How to install USB driver?
If works on USB interface then the host will install the USB driver itself, just step into the
tips on the OS. If works on optional RS232 or RS485 interface then it needs no driver to be
installed.
If the VCP USB works on windows OS and can not find a USB driver for it, then you can
open the folder “USB_Driver_Windows”, then you will find two installer programs shown
as below.
If the user’s OS is windows 32 bits, then click “CP210xVCPInstaller_x86.exe” to
install the driver, else if 64 bits, then click “CP210xVCPInstaller_x64.exe” to install
ER719
User Manual
Version 1.0 Page 7 of 11 Apr 2022
the USB driver.
On the next picture, please click “next step”.
On the next picture, select “I accept this agreement”, next click “next step”.
ER719
User Manual
Version 1.0 Page 8 of 11 Apr 2022
On the next picture, click “Finish”, then the USB driver install fully.
How to find out which communications port the operating system has assigned to
ER719
User Manual
Version 1.0 Page 9 of 11 Apr 2022
the USB driver?
Windows XP---
The path is:
Start=>Control Panel=>System(you might need to set your Control Panel to
‘Classic View’)=>Hardware=>Device Manager=>Ports(COM & LPT)
Windows 7 and above versions---
The path is:
Start=>Control Panel=>Device Manager(you might need to set your Control Panel
to ‘Classic View’)=>Ports(COM & LPT)
Note: If the COMX exceed COM10, please change it between 1 to 8, for example, it
shows COM12, then you can change it into COM3.
ER719
User Manual
Version 1.0 Page 10 of 11 Apr 2022
7. Troubleshooting
No. fault solution
1 No sound when power on If the red led is not light, plug the USB again
or plug it into another USB port or supply
correct power for it.
2 Red led not light when
power on
Same with above.
3 Beep all the time when
power on
Reconnect or repower it.
4 Can not read the card No card on the ER719 antenna area or the card
maybe bad or it is not a supported card.
5 Can read card SN, but
can not read or write
the blocks
You have not the right authenticated keys.
--------------------------------------------------------------------------------------------------------------
Contact Information:
Ehuoyan Technology Co., Ltd.
Tel: +86 -010-80128328
Web Site: www.ehuoyan.com
Indice
Altri manuali EHUOYAN Sistema RFID
