Ei Electronics EI 100S Silencer Manuale utente

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei100S DataSht RevB

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

Email. eielectronics@eiltd.ie

Web: www.eielectronics.com

Model Ei 100S Ionisation

High sensitivity –responds to all standard fires

Dual Ionization chamber - quick response to fast

flaming fires

Battery powered –9V (supplied)

Needs no wiring

Missing battery indicator

Low battery warning

Built in sounder

Test and hush button

Kitemarked to BS EN 14604:2005

5 year guarantee

Product Description

The Ei100S is an Ionisation Smoke Alarm that runs on a

9V battery (supplied with the alarm).

Ionisation smoke alarms operate on the principle that

electrical current flowing between electrodes in an

ionization chamber is reduced when smoke particles

enter.

Ionisation technology gives a rapid response to fast

flaming fires,

The Ei100S is easily installed and comes supplied with

all necessary screw fixings.

The Ei100S is fitted with a warning flag that pops up

when the battery is removed. This prevents the cover

from closing when there is no battery fitted to the unit.

When the battery is being installed or changed, this flag

must be held down while gently pushing the battery into

the battery holder.

When the battery is first connected, the alarm may sound

for 2-3 seconds –this is normal and means that the

battery is connected correctly

Operation

The smoke detector will activate the built in sounder

upon sensing smoke particles

Hush button to silence the unit for 10 minutes in

case of nuisance alarm

The smoke detector will automatically reset itself

and silence the sounder when smoke particles are

no longer present in the sensing chamber

The built in sounder will provide a minimum sound

output of 85dB at 3m

The smoke detector has a built in warning flag to

prevent installation of the detector without a battery

fitted

The “Test” button will perform a self test and sound

the horn (it may take up to 10 seconds)

The smoke detector will emit a beep every 40

seconds to indicate that the battery back up is

depleted and needs replacing

9V BATTERY POWERED

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei100S DataSht RevB

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

Email. eielectronics@eiltd.ie

Web: www.eielectronics.com

Model Ei100S Ionisation

Installation & Placement

Alarms should be placed in accordance with the general guidelines shown in

the diagram above. These recommendations are based on the problem of

areas of “dead air” close to corners of rooms and apexes of ceilings, which

could result in the prevention of smoke reaching the smoke detector

Please consult the Instruction Leaflet supplied with the Ei100S for detailed

instructions as to how to correctly install and position the smoke detector

Important Precaution:

Do not install the actual smoke/heat

alarm itself in new or renovated

buildings until all work is completed

(including floor coverings) and the

building has been fully cleaned.

(Excessive dust and debris from

building work can contaminate the

smoke chamber and cause

problems, and it will also invalidate

the guarantee). If it must be

installed, cover it completely,

particularly around the edges, with

a dust cover (eg. a plastic bag),

until all cleaning is finished..

Technical Specification

Sensor Ionisation, uses electrically

charged ions that will react

to smoke particles

Sensitivity: Complies with BS 5446 Part 1:

2000

Source: Americium 241

Airspeed: Essentially immune to the effect

of airspeed.

Button Test: Simulates the effect of smoke and

checks chamber, electronics and

horn.

Supply Voltage: 9V battery

Alarm: Piezoelectric-horn

in unit

Alarm Sound Output: 85dB (minimum) at 3m

Temperature Range: 0 to 40°C

Humidity Range: 0% to 90% Relative Humidity

Fixing: Screw fixings supplied

Plastic material: UL94HB flame retardant

Dimensions: 140mm x 120mm x 45mm

Weight: 174 gram

Warranty: 5 year (limited) warranty

Approvals: Kitemarked to BS EN 14604:2005,

CE Approved

Specifications are subject to change

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ei Electronics Rilevatore di fumo

Ei Electronics

Ei Electronics Ei 105C Optical Manuale

Ei Electronics

Ei Electronics Ei3100RF? Ei3500RF Manuale

Ei Electronics

Ei Electronics EiA605MRF Manuale utente

Ei Electronics

Ei Electronics Ei160e Series Manuale utente

Ei Electronics

Ei Electronics Ei141 Ionisation Manuale utente

Ei Electronics

Ei Electronics Ei161e Manuale utente

Ei Electronics

Ei Electronics Ei154TL Manuale utente

Ei Electronics

Ei Electronics Ei186 Manuale utente

Ei Electronics

Ei Electronics Ei Ei168RC Manuale utente

Ei Electronics

Ei Electronics Ei141EK Manuale utente

Ei Electronics

Ei Electronics Ei151TL Manuale utente

Ei Electronics

Ei Electronics Ei650 Series Manuale utente

Ei Electronics

Ei Electronics Ei160 Manuale

Ei Electronics

Ei Electronics EI 100B Standard Manuale

Ei Electronics

Ei Electronics Ei605MTYRF Manuale utente

Ei Electronics

Ei Electronics Ei140RC Series Manuale utente

Ei Electronics

Ei Electronics Ei166R Manuale utente

Ei Electronics

Ei Electronics Ei3024 Manuale utente

Ei Electronics

Ei Electronics MCP401RC Manuale utente

Ei Electronics

Ei Electronics Ei128R Manuale utente

Ei Electronics

Ei Electronics Ei144 Heat Manuale utente

Ei Electronics

Ei Electronics Ei2110e Series Manuale utente

Ei Electronics

Ei Electronics Heat Alarm Ei 164R Heat Manuale utente

Ei Electronics

Ei Electronics EI 159 Manuale utente

Manuali Rilevatore di fumo popolari di altre marche

x-sense

x-sense SD19-W Manuale utente

BRK electronic

BRK electronic First Alert P1010 Manuale utente

FireAngel

FireAngel Thermoptek ST-622 Manuale utente

teko

teko Astra-42A Manuale utente

Safetec

Safetec SDS-2/6 Manuale del proprietario

Siemens

Siemens PE-11C Manuale utente

System Sensor

System Sensor DH500ACDC Manuale utente

Resolution Products

Resolution Products RE612 CryptiX Manuale utente

First Alert

First Alert PC900V Manuale utente

Eminent

Eminent EM6590 E-Domotica Manuale utente

Carrier

Carrier Kidde Quell Q301 Manuale utente

VESDA

VESDA VLF-500 Manuale utente

ELRO

ELRO FS8110 Manuale utente

Heiman

Heiman SMOKI NS-626PHS Manuale utente

Regin

Regin SDD-S65 Manuale utente

Family Gard

Family Gard FG225 Manuale utente

Greystone

Greystone DSD120 Manuale utente

Aparton

Aparton ASD-10 Manuale utente